User Guide for StarTech models including: P2ADDH462-KVM-SWITCH, P2ADDH462-KVM-SWITCH 2 Port Dual Monitor HDMI DisplayPort KVM Switch, P2ADDH462-KVM-SWITCH, 2 Port Dual Monitor HDMI DisplayPort KVM Switch, Dual Monitor HDMI DisplayPort KVM Switch, HDMI DisplayPort KVM Switch, DisplayPort KVM Switch, KVM Switch, KVM Switch

2-Port Dual-Monitor DisplayPort and HDMI KVM Switch, 4K 60Hz, 1x HDMI & 1x DP Monitor, 2-Port USB 5G

2-Port Dual-Monitor HDMI/DisplayPort KVM Switch - 4K 60Hz

Apr 21, 2025 — Hotkey Commands. Hotkey commands are keystroke sequences that initiate computer/device functions and can be used to initiate KVM Switch functions.

[PDF] 2-Port Dual-Monitor HDMI/DisplayPort KVM Switch - 4K 60Hz - USB ...

Apr 21, 2025 · Enable the binding of PC (USB/Video) and Audio switching. • Audio will switch with the PC Ports USB and Video functions. • Enabled by default.

• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 78.07KB

Hotkey Command Guide

2-Port Dual-Monitor HDMI/DisplayPort KVM Switch - 4K 60Hz - USB 5Gbps

Product IDs
P2ADDH462-KVM-SWITCH
Product Information
For the latest software, manuals, product information, technical specifications, and declarations of conformance, please visit: www.StarTech.com/P2ADDH462-KVM-SWITCH
Hotkey Commands
Hotkey commands are keystroke sequences that initiate computer/device functions and can be used to initiate KVM Switch functions. A hotkey command sequence must be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional keystrokes. Successful hotkey command inputs result in a high-pitch beep. Unsuccessful hotkey command inputs result in a low-pitched beep.
Notes: - All keystroke combinations must be entered in rapid succession. - Press and release the indicated keys, unless otherwise specified.
HK_LCode
Option 1.1
· Scr Lck + Scr Lck
Option 1.2
To change the HK_LCode:
· HK_LCode + H + Esc, Caps, or F12
· Alternatively, press and hold the front Host Selection Button for PC2, until 2 beeps are emitted, then press the desired leading hotkey of Scr Lck, ESC, Caps, or F12

Hotkey Command HK_LCode + 1 ~ 2
or HK_LCode + F1 ~ F2
HK_LCode + W
HK_LCode + Q
HK_LCode + F5 ~ F6
HK_LCode + Up Arrow Key
or HK_LCode + Down Arrow Key HK_LCode + B HK_LCode + S
HK_LCode + H + "x"

Function
· Select PC 1 or PC 2.
· Disable the binding between PC (USB/Video) and Audio when switching between PC 1 or PC 2.
· Allows switching of PC Ports USB and Video functions, while Audio does not switch
· Enable the binding of PC (USB/Video) and Audio switching.
· Audio will switch with the PC Ports USB and Video functions.
· Enabled by default. · Audio Unbound: Selects only the audio and mic source
between PC 1 or PC 2, does not switch USB and Video · Audio Bound: Select PC 1 or PC 2 and their respective
USB/Video/Audio Ports
· Select the next/previous PC Port. · If Audio is unbound, the audio will not switch
· Disable the Beep that indicates HotKey Command Inputs.
· Enable Autoscan. · Press any key to stop the Autoscan function.
· Define the Autoscan time delay. · "x" = 1 - 10sec, 2 - 20sec, 3 - 30sec, 4 - 40sec, 5 - 50sec, 6 - 60sec, 7 - 70sec, 8 - 80sec, 9 - 90sec, 0 100sec

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Hotkey Command Revision: April 21, 2025



References

• 2-Port Dual-Monitor DisplayPort and HDMI KVM Switch, 4K 60Hz, 1x HDMI & 1x DP Monitor, 2-Port USB 5G
• StarTech.com Support