USB Type-C Hub for imac
Quick Start Guide
First-Time Use
- Thanks for choosing Qwiizlab. Please read this Quick Start Guide carefully before use. Please feel free to contact us by email to support@qwiiziab.net if needed.
- This product combines USB Type-C hub and docking station in a single sleek case. It enhances functionality on your 2021 iMac by adding convenient access for all most-used ports and slots.Without extra driver or software installation, it runs smoothly with your 2021 iMac as a perfect addition. With a slim and uni-body design, it saves you precious desktop space.
Safety of Use
- The environmental operation temperature for this product is 0 to 40 C .
- The exposure to rain, moisture or snow is not allowed.
Compatibility
* It ONLY supports 2021 iMac (M1), it does NOT support any other models of iMac.
How To Connect
Step 1: Put the plastic fin onto the bottom edge of the screen of 2021 iMac.
Step 2: Plug the USB-C hub into the Thunderbolt port on the rear of 2021 iMac.
Step 3: Put the USB-C hub into the notches on the plastic fin and slide it to on the right.
eVatmaster Consulting GmbH Bettinastr.30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
Email: support@qwiizlab.net
Wesite: www.qwiizlab.net
Qwiizlab is a registered trademark all over the world.
All rights reserved by the owner and grantee. 
730-IMC0201 V1.0
Documents / Resources
 |
Qwiizlab TN02 USB C Hub 6-in-1 Adapter [pdf] User Guide TN02 USB C Hub 6-in-1 Adapter, TN02, USB C Hub 6-in-1 Adapter, Hub 6-in-1 Adapter, 6-in-1 Adapter, Adapter |
