PPI OmniX Plus Self-Tune PID Temperature Controller
This brief manual is primarily meant for quick reference to wiring connections and parameter searching. For more details on operation and application; please log on to www.ppiindia.net
INPUT / OUTPUT CONFIGURATION PARAMETERS: 
CONTROL PARAMETERS
Operator parameters
Soak Timer Parameters
FRONT PANEL LAYOUT
Front Panel
Keys Operation
| Symbol | Key | Function |
 |
PAGE | Press to enter or exit set-up mode. |
 |
DOWN |
Press to decrease the parameter value. Pressing once decreases the value by one count; holding pressed speeds up the change. |
 |
UP |
Press to increase the parameter value. Pressing once increases the value by one count; holding pressed speeds up the change. |
 |
ENTER |
Press to store the set parameter value and to scroll to the next parameter on the PAGE. |
PV Error Indications
| Message | PV Error Type |
 |
Over-range
(PV above Max. Range) |
 |
Under-range
(PV below Min. Range) |
 |
Open
(Thermocouple / RTD broken) |
ELECTRICAL CONNECTIONS
Documents / Resources
 |
PPI OmniX Plus Self-Tune PID Temperature Controller [pdf] User Manual OmniX Plus Self-Tune PID Temperature Controller, OmniX Plus, Self-Tune PID Temperature Controller, PID Temperature Controller, Temperature Controller, Controller |
