Pipi shell PILS01 Ladder Shelf Bookcase 4 Tier Bookshelf

Product Information

Specifications:

• Model: PILS01
• Dimensions:
  • Board [G]: 300 x 310mm
  • Board [F]: 300 x 280mm
  • Board [E]: 300 x 245mm
  • Board [D]: 300 x 210mm
• Material: Wood and Metal
• Weight Capacity: Up to X lbs

Product Usage Instructions

Step 1: Assembly of Poles and End Caps
Secure poles [B] and [C] to board [G]. Attach end caps [I] to the bottom of poles [B] and [C]. Use bolts J and the provided tools.

Step 2: Attaching Top Frames
Secure top frames [A] to poles [B] and [C] using bolts J.

Step 3: Attaching Boards
Secure boards [F], [E], and [D] to the assembled frame using bolts J.

Step 4: Assembling Cross Brace
Assemble cross brace [H] using bolts K and L.

Step 5: Securing Cross Brace
Secure cross brace [H] to the back side of the shelf using bolts K and L.

Step 6: Wall Mounting
For wood stud installation, follow steps 6A-1 and 6A-2. For concrete, solid wall, or brick wall installation, follow steps 6B-1 and 6B-2.

6A For Wood Stud Installation:

1. Put the ladder shelf in position and mark holes on the stud center line.
2. Drill holes into the wood stud.
3. Tighten screw [O] against the shelf.

6B For Concrete, Solid Wall, or Brick Wall Installation:

1. Mark the hole for wall anchor [N] and drill a hole.
2. Secure L-shaped plate [M] to board [D].
3. Use a hammer to knock the wall anchor into the wall and tighten screw [O] against the shelf.

Frequently Asked Questions (FAQ):

• Q: What is the weight capacity of the ladder shelf?
  A: The ladder shelf has a weight capacity of X lbs, ensuring sturdy support for your items.
• Q: Are additional tools required for installation?
  A: Yes, you will need an electric drill and hammer for the successful installation of the ladder shelf.

Supplied Parts and Hardware

Tools Needed

Tools Needed (Not Included)

Installation Instruction

Installation Tip:
Align and loosely thread all bolts into the corresponding holes before fully tightening each bolt one by one.

STEP 1
Secure poles [B] and [C] to board [G]. Then attach end caps [I] to the bottom of poles [B] and [C].

STEP 2
Secure top frames [A] to poles [B] and [C].

STEP 3
Secure board [F], [E] and [D] to the assembled frame.

STEP 4
Assemble cross brace [H].

STEP 5
Secure cross brace [H] to the back side of the shelf.

STEP 6
Secure the shelf to the wall.

For Wood Stud Installation

• Put the ladder shelf at your desired position and line up the hole with the stud centre line. Mark the hole, and drill a hole into the wood stud.
• Tighten the screw [O] until it is pulled firmly against the shelf.

For Concrete, Solid Wall or Brick Wall Installation

• Put the ladder shelf in your desired position. Mark the hole for the wall anchor [N], and drill a hole.
• Use a self-supplied hammer to knock the wall anchor [N] into the wall. Tighten the screw [O] until it is pulled firmly against the shelf.

Contact Information

• (US/CA) 1-800-556-9829
• (UK) 44-808-196-3885
• support@pipishell.net
• www.pipishellav.com.

Documents / Resources

Pipishell PILS01 Ladder Shelf Bookcase 4 Tier Bookshelf [pdf] Instruction Manual PILS01 Ladder Shelf Bookcase 4 Tier Bookshelf, PILS01, Ladder Shelf Bookcase 4 Tier Bookshelf, Shelf Bookcase 4 Tier Bookshelf, Bookcase 4 Tier Bookshelf, 4 Tier Bookshelf, Tier Bookshelf, Bookshelf

References

• User Manual