MEAN WELL XLC-40-MA Multiple Stage Constant Power LED Driver Instruction Manual

The XLC-40-MA series LED driver offers constant power mode
output with multiple-stage options that can be selected using the
DIP switch. The driver comes in two variants – the XLC-40-MAS
series (Independent type) and the XLC-40-MA series (Built-in
type).

Placement Guidelines:

The device should be placed away from vertical metal structures
to maximize range. If mounted on a metal plate, ensure the antenna
is not obscured, and there is a cutout under the antenna for RF
signal transmission.

Installation Instructions:

For detailed installation guidelines, please refer to the
installation manual available at: Installation Manual

Frequently Asked Questions (FAQ)

Q: How can I reset the ‘AC ON/OFF process’ if there is a
malfunction?

A: If there is a malfunction in the ‘AC ON/OFF process’, the
process can be reset by following Method 1 or Method 2 as outlined
in the user manual.

“`

View Fullscreen

40W Multiple-Stage Constant Power LED Driver

XLC-40-MA series
User’s Manual

XLC-40-MAS Series (Independent type)

XLC-40-MA Series (Built-in type)

110
for XLC-40 MAS series

M M EL
DC Input: 176-280 VDC

SELV

Features
Constant power mode output with multiple stage selectable by DIP switch Plastic housing with class II and PFC design Flicker free, complying with CE ErP directive Standby power consumption <0.5W Meet emergency lighting (EL) function application Minimum dimming level 0.5% Matter over thread, Matter 1.3 specification 5 years warranty

Note.10
Applications
Recessed Light Down Light Panel Light Commercial Lighting Decorative Lighting Matter wireless Lighting
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description
XLC-40-MA series is a 40W with constant power output LED driver . It can operate from 100~305VAC and output current ranging between 600 mA to 1400 mA selectable by DIP switch . Thanks to high efficiency up to 88%, it is able to operate for -25~90 case temperature under free air convection. XLC40-MA series is designed based on latest safety regulations with Matter wireless dimming.It provides more flexibility for LED Lighting application.

Model Encoding XLC – 40 – H – MA

Type MA MAS

Blank: without strain-relief (Built-in type)
Casing type: S: with strain-relief (Independent type)
Function options :Matter wireless dimming Rated output voltage (H-type) Rated wattage Series name

Function Output current selectable by DIP switch, without strain-relief (Built-in type) Output current selectable by DIP switch, with strain-relief (Independent type)

Note In stock In stock

File Name:XLC-40-MA-SPEC 2025-02-24

40W Multiple-Stage Constant Power LED Driver

XLC-40-MA series

SPECIFICATION

MODEL

XLC-40-H-MA

OPEN CIRCUIT VOLTAGE

Note.2 60V

DEFAULT CURRENT
CURRENT ADJ.RANGE (BY DIP SWITCH)

1050mA 0.6~1.4A

OUTPUT

CONSTANT CURRENT REGION
RATED POWER

Note.3 9~54V Note.4 40W

CURRENT RIPPLE

<4%(@full load)

CURRENT TOLERANCE

±5%

DIMMING RANGE

0~100%

SETUP, RISE TIME

Note.5 2500ms, 100ms/230VAC, 2500ms, 100ms/115VAC

VOLTAGE RANGE FREQUENCY RANGE
POWER FACTOR

100 ~ 305VAC 141 ~ 400VDC
47 ~ 63Hz PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)

TOTAL HARMONIC DISTORTION

THD<10%(@load50%/230VAC; @load75%/277VAC), THD<15%(@load50%/115VAC) (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

EFFICIENCY (Typ.) INPUT AC CURRENT

Note.6 88% 0.5A / 115VAC 0.25A / 230VAC 0.2A/277VAC

INRUSH CURRENT(Typ.)

COLD START 10A(twidth=100s measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

51 units (circuit breaker of type B) / 51 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 277VAC

STANDBY POWER CONSUMPTION

Note.7 Standby power consumption<0.5W(Dimming off)

PROTECTION SHORT CIRCUIT OVER TEMPERATURE

Hiccup mode, recovers automatically after fault condition is removed Stage 1: De-rating to 75% loading; Stage 2: De-rating to 50% loading. Recovers automatically after fault condition is removed.

WORKING TEMP.

Tcase=-25 ~ 90 (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section)

MAX. CASE TEMP.

Tcase=90

ENVIRONMENT WORKING HUMIDITY STORAGE TEMP., HUMIDITY

20 ~ 90% RH non-condensing -40 ~ +80, 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03%/ (0 ~ 50)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY STANDARDS

ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC); BS EN/EN62384, GB/T 19510.1, GB/T 19510.213, EAC TP TC 004; CSA C22.2 No. 250.13-12 approved; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13;

WITHSTAND VOLTAGE

I/P-O/P: 3.75KVAC

ISOLATION RESISTANCE

I/P-O/P: >100M Ohms / 500VDC / 25/ 70% RH

EMC EMISSION

Parameter Conducted Radiated Harmonic Current

Standard BS EN/EN55015(CISPR15) ,GB/T 17743 BS EN/EN55015(CISPR15) ,GB/T 17743 BS EN/EN61000-3-2 , GB17625.1

Test Level/Note ——–Class C @load50%

SAFETY &
EMC

Voltage Flicker BS EN/EN61547 Parameter

BS EN/EN61000-3-3 Standard

—-Test Level/Note

ESD

BS EN/EN61000-4-2

Level 3, 8KV air ; Level 2, 4KV contact

Radiated

BS EN/EN61000-4-3

Level 2

EMC IMMUNITY

EFT/Burst

BS EN/EN61000-4-4

Level 2

Surge

BS EN/EN61000-4-5

Level3, 1KV/Line-Line

Conducted

BS EN/EN61000-4-6

Level 2

Magnetic Field

BS EN/EN61000-4-8

Level 2

Voltage Dips and Interruptions

BS EN/EN61000-4-11

70% residual voltage for 10 period, 0% residual voltage for 0.5 periods

OTHERS

MATTER STANDARD FLICKER MTBF DIMENSION

Matter 1.3 Specification Note.8 PstLM 1, SVM 0.4
3935.2 K hrs min. Telcordia SR-332 (Bellcore); 147*40*32mm,107*40*32mm (L*W*H)

342.9 Khrs min. MIL-HDBK-217F (25)

PACKING

193g; 60pcs/12.58Kg/0.58CUFT(for blank type); 210g; 50pcs/11.5Kg/0.57CUFT(for S-type)

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Output hiccups under no-load condition. 3. Please refer to DRIVER METHODS OF LED MODULE. 4. De-rating may be need under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 5. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 6. Efficiency is measured at 800mA/50V output set by dip-switch. 7. Standby power consumption is measured at 230VAC. 8. Flicker is measured at full load with LED modules. 9. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final
equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 10. For XLC-S series: RCM is on a voluntary basis. Non IC classification Independent LED control gear is not suitable for residential installations.
For XLC(except -S) series: RCM is on a voluntary basis and meets relevant IEC or AS/NZS standards complying with AS/NZS 4417.1 11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less. 12. The ambient temperature de-rating of 3.5/1000m with fanless models and 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 13. For more information, please contact with MEAN WELL sales. Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

File Name:XLC-40-MA-SPEC 2025-02-24

40W Multiple-Stage Constant Power LED Driver

XLC-40-MA series

BLOCK DIAGRAM

EMI FILTER

I/P

RECTIFIERS

POWER SWITCHING

O.L.P.

PWM&PFC CONTROL

RECTIFIERS &
FILTER
O.T.P.

DC to DC
CURRENT & VOLTAGE LIMIT DETECTION
CIRCUIT

Fosc : 90KHz +V -V
MATTER MODULE

DRIVING METHODS OF LED MODULE

I-V Operating Area

XLC-40-H-MA For 40W application

60V

55V

600mA, 54V 700mA, 54V

50V

45V

40V 1050mA, 38V
35V
1400mA, 28.6V 30V

25V

20V

15V

10V
600mA, 9V 5V

1400mA, 9V

0V 400mA 500mA 600mA 700mA 800mA 900mA 1000mA 1100mA 1200mA 1300mA 1400mA 1500mA

CONSTANT POWER TABLE

XLC-40-H-MA is a multiple-stage constant power driver, selection of output current through DIP switch is exhibited below.

DIP S.W

9~54V 600mA

—-

9~54V 700mA

—-

9~50V 800mA

—-

9~45V 900mA

—-

9~38V 1050mA(default)

—-

9~33V 1200mA

—-

9~31V 1300mA

—-

9~29V 1400mA

Note: The operating voltage range which show on this table is recommend to use.

File Name:XLC-40-MA-SPEC 2025-02-24

40W Multiple-Stage Constant Power LED Driver

XLC-40-MA series

OUTPUT LOAD vs TEMPERATURE

LOAD (%)

100 80
230 VAC 60
110VAC 40 20

-25 -15 0

50 60

70 (HORIZONTAL)

AMBIENT TEMPERATURE,Ta ()

LOAD (%)

100 80 60 40 20

-25

75 85 90 (HORIZONTAL)

Tcase ()

LOAD (%)

STATIC CHARACTERISTIC
100 90 80 70 60 50 40
100 110 130 150 170 190 210 230 250 270 290 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.

LIFETIME(Kh)

LIFE TIME
120 100 80 60 40 20
0 25 30 35 40 45 50 55 60 65 70 75 80 85 90
Tcase ()

File Name:XLC-40-MA-SPEC 2025-02-24

THD(%)

40W Multiple-Stage Constant Power LED Driver

XLC-40-MA series

TOTAL HARMONIC DISTORTION (THD)
XLC-40-H-MA Model,Tcase at 75

4 2

TBD

115VAC 230VAC 277VAC

0 50%

60%

70%

80%

90%

100%

LOAD (1050mA)

THD(%)

6 4

TBD

115VAC 230VAC 277VAC

0 50%

60%

70%

80%

90%

100%

LOAD (1400mA)

POWER FACTOR (PF) CHARACTERISTIC

XLC-40-H-MA Model,Tcase at 75

0.98

0.96

0.94

0.92

0.9 0.88 0.86

TBD

115VAC 230VAC 277VAC

0.84

0.82

0.8 50%

60%

70%

80%

90%

100%

LOAD (1050mA)

0.98

0.96

0.94

0.92

0.9 0.88 0.86

TBD

115VAC 230VAC 277VAC

0.84

0.82

0.8 50%

60%

70%

80%

90%

100%

LOAD (1400mA)

EFFICIENCY vs LOAD

XLC-40-MA series possess superior working efficiency that up to 88% can be reached in field applications. XLC-40-H-MA Model,Tcase at 75

TBD

75 115VAC
70 230VAC

277VAC

50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

EFFICIENCY (%)

80 75

TBD

115VAC

230VAC

65 277VAC

50 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

LOAD (1050mA)

LOAD (1400mA)

EFFICIENCY (%)

File Name:XLC-40-MA-SPEC 2025-02-24

40W Multiple-Stage Constant Power LED Driver

XLC-40-MA series

MECHANICAL SPECIFICATION
XLC-40-MA series Built-in Type
1 2 TB1

107 mm 99 mm
tc

1 TB2 2
LED INDICATOR
50.5 mm
RESET BUTTON
DIP-SWITCH

14.6 mm
1 23
32mm 40mm

Case No.XLC-25 Unit:mm Tolerance:±1

TB1 wiring: 8-9mm
0.5-1.50mm2

Terminal Pin No. Assignment( TB1)

Pin No. 1 2

Assignment AC/N AC/L

Terminal Pin No. Assignment(TB2)

Pin No. Assignment

-V

TB2 wiring: 8-9mm

32 mm

0.5-1.50mm2

XLC-40-MAS series Independent Type

1 2

TB1

147 mm 99 mm
tc

TB2

1 2

LED INDICATOR
50.5 mm
RESET BUTTON

DIP-SWITCH

14.6 mm
1 23
32mm 40mm

Case No: XLC-25-S Unit: mm Tolerance:±1

TB1 wiring: 8-9mm
0.75-1.5mm2
LED indicator

Terminal Pin No. Assignment( TB1)

Pin No. 1 2

Assignment AC/N AC/L

Terminal Pin No. Assignment(TB2)

Pin No. 1 2

Assignment +V -V

TB2 wiring: 8-9mm

32 mm

0.5-1.5mm2

Flash slowly Flash quickly Constantly ON Constantly OFF

Bluetooth Broadcast running Factory Reset running. Matter wireless connected Matter wireless disconnected and Bluetooth Broadcast OFF

File Name:XLC-40-MA-SPEC 2025-02-24

40W Multiple-Stage Constant Power LED Driver

XLC-40-MA series

FACTORY RESET
By RESET BUTTON Press and hold the reset button for 10 seconds. When the LED indicator flashes quickly, release the button. The factory reset will then be completed.

1
2 TB1

1
TB2 2
LED INDICATOR RESET BUTTON
DIP-SWITCH

1 23

By AC ON/OFF
To perform factory reset through AC ON/OFF, the following process must be strictly followed. If the AC ON/OFF process is correct, the output light will flash for 15 seconds. When the flashing stop, it means the factory reset is completed. This operation is consistent with the factory reset effect performed by long-pressing the reset button.

AC ON/OFF process to executes factory reset:

>25s

10-15s

>30s 2-5s >30s

10-15s

>30s

2-5s

>30s

2-5s >30s

Phase 1 2 3 4 5 6 7 8 9 10
11

Duration 10-15s >30s 2-5s >30s 10-15s >30s 2-5s >30s 2-5s >30s
>25s

AC status ON OFF ON OFF ON OFF ON OFF ON OFF ON(should wait until output light stop flashing)

If there is a malfunction in the ‘AC ON/OFF process’, the process can be reset by the following method, starting from stage 1 again.

Method 1: AC ON time exceeds 25 seconds

Method 2: AC ON times for 2-5s and twice

>25s >30s

2-5s

>30s

File Name:XLC-40-MA-SPEC 2025-02-24

40W Multiple-Stage Constant Power LED Driver

XLC-40-MA series

PLACEMENT
Matter device has an integrated antenna for easy integration. In order to maximize the range in every direction, some design guidelines should be taken into consideration when mounting the device.
The antenna positions of the device are shown in the figure below:

AC Input

Antenna location DC Output

AC Input

Antenna location

DC Output

Keep the device as far away as possible from vertical metal structures.
When the device is mounted on a metal plate, the antenna should not be obscured, and there needs to be a cutout under the antenna to ensure that the RF signal can be transmitted.
The device’s communication range may be influenced by environmental factors and installation positioning, necessitating on-site adjustments and testing.

Installation Manual
Please refer to : http://www.meanwell.com/manual.html

File Name:XLC-40-MA-SPEC 2025-02-24

Documents / Resources

MEAN WELL XLC-40-MA Multiple Stage Constant Power LED Driver [pdf] Instruction Manual
XLC-40-MA, XLC-40-MAS, XLC-40-MA Multiple Stage Constant Power LED Driver, XLC-40-MA, Multiple Stage Constant Power LED Driver, Stage Constant Power LED Driver, Constant Power LED Driver, Power LED Driver, LED Driver

References

User Manual

MEAN WELL XLC-40-MA Multiple Stage Constant Power LED Driver Instruction Manual

XLC-40-MA Multiple Stage Constant Power LED Driver

Product Specifications

Product Usage Instructions

Features Overview:

Placement Guidelines:

Installation Instructions:

Frequently Asked Questions (FAQ)

Q: How can I reset the ‘AC ON/OFF process’ if there is a
malfunction?

Documents / Resources

References

Leave a comment

Cancel reply