LEDSAVERS 64258 Rechargeable Headlamp with Sensor
Use
- Connect the included USB cable to the charging port under the cover on the side of the lamp and a USB adapter. A full charge takes about 5 hours. The button lights up red during charging and turns green when the battery is fully charged.
- Press the button to turn on or off the headlamp.
- Press and hold the button when the lamp is on to use the sensor.
The button turns red. In sensor mode, you can turn on or off the lamp by moving your hand in front of the lamp.
Safety instructions
This product contains a rechargeable Li-ion battery that can be replaced (sold separately). Exhausted batteries are to be removed and replaced by correct type of batteries.
Dispose of used batteries according to the local regulations.
Specifications
- Power 3W
- Lumen: 3001m
- Battery lifetime up to
- Charging time ca. 5 h
- Charging USB-C (cable incl.)
- Weight 179 g (incl. battery)
- Battery lx 18650 (incl.)
www.ledsavers.com
Box 50435,
Malmti, Sweden
2022-09-27
Documents / Resources
 |
LEDSAVERS 64258 Rechargeable Headlamp with Sensor [pdf] User Manual 64258 Rechargeable Headlamp with Sensor, 64258, Rechargeable Headlamp with Sensor, Headlamp with Sensor, Sensor |
