iTORCH Rechargeable & Sensor Headlamp HS1R User Manual
iTORCH Rechargeable & Sensor Headlamp HS1R

Specifications

  • Material: ABS
  • LED: CREE XPG LED
  • Max Output: 200 LM
  • Working Voltage: 3.0V-4.2V
  • Built-in Battery: a lithium-polymer rechargeable battery
  • Waterproof: IPX 6
  • N.W.: 43g
  • G.W.: 85g Dimensions: 60×35×32 mm
  • Warranty: 2 years

ANSI Chart

FL 1 STANDARDHIGHMEDIUMLOWSOS
Output (lumens)200LM85LM25LM200LM
Runtime (hours)2.5h5h15h2.5h
Intensity (cd)550cd
Beam distance(meters)80m
Impact Resistance (meters)lm
WaterproofIPX-6

Note: all datas above were generated in Fitorch lab. Differences may happen base on usage and conditions.

Operations

  1. Standard Mode
    • Click thePower On/Off  to reach high mode, and then click again to enter Medium.
    • HS-1R will be lighted as : High-Medium-Low Off.
    • Hold the button for 2S to enter into SOS.
      Standard Mode
  2. Motion Sensor Mode
    Click the Motion Sensor Modeto activate motion sensor mode. Wave your hand (the optimal distance is 5-15cm) to make the lamp off or on. When the lamp is off, the indicator light on right will be blue.
    Motion Sensor Mode

How to Charge

  • Remove the rubber cover, and then use a USB cable to connect with the charging port on the lamp.
  • The indicator light on left will be red during charging, and then change to green when charging complete.
  • Note: When the light of headlamp is dim, please recharge the battery immediately.

Usage and Maintenance

  • It is recommended to fully charge the battery before using the headlamp.
  • To prolong the battery lifetime, it is best to recharge the battery BEFORE it is fully dischared.
  • Avoid using this headlamp in extreme temperatures. § DO NOT attempt to open the battery compartment as this could damage the unit and will make the warranty invalid.
    WARNING!
    Looking at the light for a long time will harm your eyes.

Warrnraty

FITORCH guarantees: this headlamp is found to be defective on function under normal use within 2 years from the purchase date, will be repaired or replaced with any charge.

Warranty Procedure

  • Please contact your original FITORCH dealer for replacement and repairs.
  • If the warranty issue cannot be resolved by the dealer, please contact
  • FITORCH at info@fitorchworld.com for assistance. Please provide the following information to expedite the process:
    1. List the serial number on the light.
    2. Include a detailed description identifying the issue, accompanied by pictures or a short video demonstration if necessary.
    3. Provide the name and store of the dealer you made the purchase from; and a copy of the proof of purchase.

Logo

QR CodeFacebook

QR Code Website

Web: www.fitorchworld.com

ShenZhen Fitorch Electronics Technology Co., Ltd
Office Address:6F, Longsheng Commercial Building
Dalang St, Longhua new district
ShenZhen City, China
Tel: +86-755-2101-3606
Web: www.fitorchworld.com
E-mail: Info@fitorchworld.com

Icons Disposal Icon

 

Documents / Resources

iTORCH Rechargeable & Sensor Headlamp HS1R [pdf] User Manual
iTORCH, Rechargeable, Sensor, Headlamp, HS1R

References

Leave a comment

Your email address will not be published. Required fields are marked *