LABMAN LMTB200 Turbidity Meter User Guide

LMTB200 Turbidity Meter
User Guide

Contents hide

1 Salient Features

2 SPECIFICATIONS

3 Documents / Resources

3.1 References

4 Related Posts

Salient Features

Turbidity meter with TSS measurement mode, selectable four turbidity units
Turbidity meter is equipped with a 4.5″ TFT display.

2 to 7 points calibration using the Formazin Standards.
Selectable four turbidity units, including the NTU, FNU, EBC and ASBC.

TSS conversion factor ensures accurate measurement for Total Suspended Solids.
Continuous measurement mode that can used for indexing and matching the sample vials.

Hold function freezes current reading for easy viewing and recording.
Password protection prevents the unauthorized calibration and settings.

Help message as a operational guide that helps user quickly begin using the meter.
System menu allows setting the 9 parameters, including the date and time, resolution, etc.

Reset feature automatically resumes all settings back to factory default settings.

SPECIFICATIONS

MODEL	LMTB200
Make	LABMAN
Measurement Range	0-2000 NTU, 0-500 EBC, 0-9999 ASBC,
Resolution	0.01 (0-100 NTU), 0.1 (100-999 NTU), 1(999^2000 NTU)
Accuracy	±2% of reading for 0-500 NTU, ±3% of reading for 50172000 NTU
Calibration Points	2 to7 points ( 0.02, 10.00, 200, 500, 1000, 1500, 2000 NTU )
TSS Range	deponding on the TSS conversion factor
TSS Accuracy	±3% of reading
Light Source	Infrared-emitting diode (850 nm wavelength)
Detector	Silicon Photodiode
Stray Light	< 0.02 NTU
Sample Vials	60 (H) x 25 (Dia)mm
Memory	Stores up to 200 data sets
Display	4.5″ TFT display
Operating Temperature	0∼50°C
Power Requirements	DC12V/2A, using AC adapters, 220VAC/50Hz
Dimensions LxWxH (mm) & Weight	250 x 177 x 96 mm & 1.2kg

* Specifications are subject to change without notice.

Catalogue 2021-22
HSN Code: 90275090
STANDARD ACCESSORIES:
Empty Vial – 1no, Calibration Standards – 3
(200NTU, SOONTU, 1000NTU)
Cloth, 12V Power Adaptor, Test Cer tificate