jetec THD8 E USB Data Logger Temperature and Humidity

BATTERY INSTALL

1. Push the tenon as the arrow instructed and remove the battery cover
2. Put the battery vertically on the battery groove
3. Make the positive side of the battery contact positive spring plate first and push the negative side of spring to fix the battery position.
4. Finish

LCD

OPERATION

• Old PDF and record will be deleted after restart logging, please backup old data.

MENU ILLUSTRATION

PDF REPORT

Simple

Detail

C

Data information

1

PDF created time

C1

Logging start time

C7

Logging stop time

2

PDF name

C2

Number of records

C8

Number of alarm

3

Logging time period

C3

Toal logging time

C9

Toal alarm time

User can make configuration by this software

Installation

• Please complete driver installation before using this software
  1. Open Installer folder, press , install according to the indication.
  2. After installation, this icon will show on the desktop

Software manual

1. Open software, press , enter into the configuration page
2. Connect datalogger to computer, press to search the device and load.
   1. Dataloger name, could be revised.
   2. Record frenquency, Min. 5 second, Max. 24 hours. Temp. Unit°C, °F
   3. Temp. alarm range. 20 ~ 80℃ (0-110℉)
   4. Humi. alarm range. 0~100% rh
   5. Temp. correction range ±5
   6. Humi. correction range ±10
   7. PDF report type(if need detail information)
3. Download record
   In page, press and downlad the data to software. After loading, data will be saved to database, and can be searched in “Search Record” page.
   1. Datalogger name
   2. Number of record
   3. Data of record
   4. Data of alarm record
   5. Graph of Temp. and Humi.
4. Search history record
   Press search downloaded history record and graph.
   1. Device name Device will be named by ID+first logging time, if repeat, will add numbers. After selected device, time range will be datalogger recording period, and the latest Time. & Humi. alarm range. The range could be reset, but will not be saved for next review.
   2. File name, press to delete this file. ※Noted!The file could’t be resumed after deleted.
   3. Time period of search.
   4. Max./Min. Temp.& Humi.and Temp. unit of search.
   5. Save record data(.CSV)
5. Graph Comparison
   Press compare four sets of recording graph.
   1. Import file
   2. Delete the selected file.
   3. File name
   4. Choose to compare Temp. or Humi.
   5. Press this column can extend the graph to full screen.
   6. Press this column can extend the graph to full screen.

• www.jetec.com.tw

Documents / Resources

jetec THD8 E USB Data Logger Temperature and Humidity [pdf] Instruction Manual THD8 E, THD8 E USB Data Logger Temperature and Humidity, USB Data Logger Temperature and Humidity

References

• User Manual