ICON PROCESS CONTROLS ITC-250B Series Battery Powered Level Display
Specifications
- Power Supply: Battery Powered
- Display: Large Bright LCD Display
- Displayed Values: Customizable for tank levels
- Input: 4-20mA
- Accuracy: High precision
- Stability: Reliable
- Operating Temp: Suitable for various environments
- Storage Temp: Ideal storage conditions
- Protection Class: NEMA 4X
- Case Dimensions (WxNxD): Varies by model
Product Usage Instructions
Programming Display Steps:
- Main Display:
- Press and hold both buttons.
- Low-Level Value:
- Press once.
- High-Level Value:
- Press for 2 seconds.
- Enter the high-level value.
Wiring Diagram:
Refer to the wiring diagram for proper installation of the device based on the model you have.
Dimensions:
Check the dimensions of your specific model for proper placement and installation.
FAQ
- Q: How do I change the battery on the ITC-250B Series?
- A: To change the battery, follow the steps outlined in the user manual. Typically, you would need to remove the casing and replace the old battery with a new one of the same specifications.
- Q: Can I use the ITC-250B Series in outdoor environments?
- A: Yes, the NEMA 4X high impact enclosure provides protection against environmental factors, making it suitable for outdoor use.
- Q: How do I customize the displayed values for tank levels?
- A: Refer to the programming display steps in the manual to set and adjust the displayed values according to your tank levels.
FEATURES
- Battery Powered
- Momentary or Adjustable Relay Timer * NEMA 4X Enclosure
- LCD Display
- All Plastic – Corrosion Resistant
- All Cord Grips Included
- Simple Programming
SPECIFICATIONS
- Power Supply 2600mAh Battery Powered
- Display LCD 4 x 20 mm High
- Displayed Values -999 – +9999
- Input Current: 4-20mA
- Accuracy 0.1% @ 25°C One Digit
- Stability 50 ppm °C
- Operating Temp -40 – 158°F (-40 – 70°C)
- Storage Temp -40 – 158°F (-40 – 70°C)
- Protection Class NEMA 4X IP67
- Case Wall Mounted Material – Polycarbonate
- Dimensions (WxNxD) 110 x 105 x 67 mm
PROGRAMMING DISPLAY
PRODUCT INSTALLATION
DIMENSIONS
CONTACTS
- www.iconprocon.com
- sales@iconprocon.com
- 905.469.9283
Documents / Resources
 |
ICON PROCESS CONTROLS ITC-250B Series Battery Powered Level Display [pdf] Instruction Manual ITC250B-SO-4, ITC250B-SO-8, ITC250B-ST-4, ITC250B-ST-8, ITC250B-SR-4, ITC250B-SR-8, ITC-250B Series Battery Powered Level Display, ITC-250B Series, Battery Powered Level Display, Powered Level Display, Level Display |