hp B15JMA Stapler Stacker Finisher
Product Specifications:
- Model: B15JMA
- Function: Staple unit installation
- Color: Green
- Manufacturer: HP
Product Usage Instructions
Step 1: Moving the Staple Unit to Installation Position
Rotate the green wheel clockwise 10 times to position the staple unit for installation.
Step 2: Rotating the Green Wheel
Rotate the green wheel counter-clockwise 10 times once the cartridge slot is visible.
Step 3: Installing Staple Cartridge
Hold the green wheel firmly while installing the staple cartridge.
Step 4: Unlocking Finisher and Printer
Release the locking mechanism to unlock the Finisher and Printer. Pull out the locking handle as demonstrated.
MORE INFORMATION
USING INSTRUCTION
Rotate the green Wheel clockwise 10 times to move the staple unit to the installation position.
Once the cartridge slot is visible, rotate the green wheel counter-clockwise 10 times.
Hold the green wheel while installing the staple cartridge.
Unlock the Finisher and Printer by releasing the locking mechanism. Pull out the locking handle as shown here.
Firmly push the Finisher and Printer together until the locking mechanism clicks into place at all three marked locations.
You can change the settings for Job Offset in the menu below:
Setting > Manage Stapler/Stacker > Job Offset. (Default:
Off) Job Offset : Separates print jobs by offsetting their placement in the output tray for easier organization.
Restriction of hazardous substances (India)
This product, as well as its related consumables and spares, complies with the reduction in hazardous substances provisions of the “India E-waste Rule 2016.” It does not contain lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except where allowed pursuant to the exemptions set in Schedule 2 of the Rule.
© Copyright 2025 HP Development Company, L.P.
Frequently Asked Questions
How many times should I rotate the green wheel to move the staple unit?
Rotate the green wheel clockwise 10 times to position the staple unit for installation.
What should I do once the cartridge slot is visible?
Rotate the green wheel counter-clockwise 10 times.
How should I handle the green wheel while installing the staple cartridge?
Hold the green wheel firmly during the installation process.
How do I unlock the Finisher and Printer?
Release the locking mechanism and pull out the locking handle to unlock them.
Documents / Resources
 |
hp B15JMA Stapler Stacker Finisher [pdf] Instruction Manual B15JMA, X1, B15JMA Stapler Stacker Finisher, Stapler Stacker Finisher, Stacker Finisher, Finisher |