FlightScope-LOGO

FlightScope i4 Range Finder

FlightScope-i4-Range-Finder-PRODUCT

In the Box

FlightScope-i4-Range-Finder-FIG-1

  1. i4 Rangefinder
  2. USB-A to USB-C charging cable
  3. Carabiner
  4. Quickstart Guide
  5. Microfiber cloth
  6. Carry case (not to scale)

The i4 Rangefinder

FlightScope-i4-Range-Finder-FIG-2

Viewfinder indicators

FlightScope-i4-Range-Finder-FIG-3

Operating instructions

FlightScope-i4-Range-Finder-FIG-4

  1. Press the power button briefly to turn on the Rangefinder. Look through the viewfinder to see the display. It will turn off automatically after 10 seconds.FlightScope-i4-Range-Finder-FIG-5
  2. Aim at a target and briefly press the power button again to measure the direct distance. You will feel a vibration indicating that the measurement has been taken.FlightScope-i4-Range-Finder-FIG-6
  3. To shoot the distance to an object such as a flag stick, press and hold the power button while moving the viewfinder around the object until the target detection logo appears. Release the power button, and the rangefinder will display the distance.FlightScope-i4-Range-Finder-FIG-7FlightScope-i4-Range-Finder-FIG-8
  4. Briefly press the mode button to toggle the SLOPE MODE on and off. FlightScope-i4-Range-Finder-FIG-9
  5. Press and hold the mode button to change the units of measurement between METERS and YARDS.FlightScope-i4-Range-Finder-FIG-10
  6. Press and hold the power button and short-press the M button to toggle Bluetooth on / off. ?FlightScope-i4-Range-Finder-FIG-11

Get the FS Golf App

FlightScope-i4-Range-Finder-FIG-12

myflightscope.com

Set up FS FlightScope-i4-Range-Finder-FIG-13 Mode

  1. Use your mobile device or tablet to setup your i4 rangefinder for use with FS Mode. Make sure your smart device’s bluetooth connection is turned on.
  2. Allow location access while using the FS Golf App for accurate weather and wind conditions and ensure precise location is turned ON.FlightScope-i4-Range-Finder-FIG-14
  3. On your smart device, open the FS golf app. Select devices, then select i4 Rangefinder.
  4. Turn your i4 Rangefinder on and activate Bluetooth. Now your i4 Rangefinder will automatically pair with your FS golf profile.
  5. Look into the viewfinder and see if FS mode is active or repeat the pairing process.

Operating FSFlightScope-i4-Range-Finder-FIG-13 Mode

FS mode requires your smart device to be nearby (within 30 feet or 10 meters), running the FS Golf application and having Bluetooth activated on your i4 Rangefinder. When the Rangefinder is switched on, it will return to the same mode and settings as were used previously. FS mode can be disabled by simply deactivating Bluetooth.

FlightScope-i4-Range-Finder-FIG-15

Charging

FlightScope-i4-Range-Finder-FIG-16

Care

FlightScope-i4-Range-Finder-FIG-17

Avoid

FlightScope-i4-Range-Finder-FIG-18

Technical specifications

FlightScope-i4-Range-Finder-FIG-19

Support

If you need assistance, please email our support at

customercare@flightscope.com

E19-UF184-ISS2
@flightscopegolf
www.flightscope.com

Documents / Resources

FlightScope i4 Range Finder [pdf] User Manual
i4 Range Finder, i4, Range Finder, Finder

References

Leave a comment

Your email address will not be published. Required fields are marked *