CMe3100 M-Bus Metering Gateway with an LTE Router included
“
Specifications
- Mechanics
- Protection class: IP65
- Mounting: Wall-mount
- Electrical connections
- Supply voltage: From mains
- Electrical characteristics
- Nominal voltage: 100-240 VAC (+/- 10%)
- Frequency: 50/60 Hz
- Power consumption: See product label
Product Usage Instructions
Power Supply
The installation should be handled by a qualified electrician or
an installer with the required knowledge.
1. Use a screwdriver to remove an arbitrary M20 knock-out from
the bottom of the enclosure.
2. Connect a power cable from mains to the wall socket.
3. Use the included cable gland to fixate the cable in the
box.
SIM Card Installation
For all Elvacos gateways, a standard SIM card needs to be
installed to use the mobile network.
Contact Elvaco at sales@elvaco.se for SIM card provision.
Antenna Setup
1. Attach the included mobile network antenna to the SMA
connector on the LTE router.
2. Ensure the antenna is not placed inside any metallic objects
or the M-Bus 2-wire.
Setting Up the LTE Router
1. Log in to the LTE router web interface using IP address
192.168.2.1 with the credentials: Username – admin, Password –
admin01.
2. Configure the router settings as needed.
Setting Up M-Bus Metering Gateway
Refer to the quick manual of CMe3100 at www.elvaco.se for
detailed instructions.
FAQ
Q: Can I drill new holes in the enclosure?
A: To maintain protection class, avoid drilling new holes in the
enclosure.
Q: How do I change the LTE router settings?
A: Log in to the router web interface and navigate to Network
-> Interfaces -> MOB1S1A1 to configure settings such as APN
and IP address.
Q: What is the default login for the LTE router web
interface?
A: The default credentials are Username – admin, Password –
admin01.
“`
CGc LTE Box
M-Bus Metering Gateway with an
LTE Router included
INTRODUCTION
The CGc-Box consists of a CMe3100 and an LTE router that communicates via mobile network using a SIM card. CMe3100 is easily configured and updated via its included web interface and supports a large number of integration protocols, such as BACnet IP, ModBus TCP, DLMS, JSON, REST, MQTT, FTP and HTTP, which makes the product useful in many different types of measurement projects.
Important
In order for the enclosure to keep its protection class, make sure not to drill any new holes in the enclosure.
POWER SUPPLY
The installation should be handled by a qualified electrician or an installer with the required knowledge.
The box is equipped with a breaker. Use a screwdriver to remove an arbitrary M20 knock-out from the bottom of the enclosure and connect a power cable from mains to the wall socket. The included cable gland is used to fixate the cable in the box.
SIM CARD
For all Elvacos gateways a standard SIM card needs to be installed in order to use the mobile network. Elvaco can provide the gateway with SIM card or the customer can use their own. Please contact sales@ elvaco.se
ANTENNA
One mobile network antenna is included with the LTE router. Attach the antenna to the SMA connector on the router.
Important
Make sure that antenna is not placed inside any metallic objects or the M-Bus 2-wire.
SETTING UP THE LTE ROUTER
Log in on the LTE router web interface
By logging in on the router web interface, the settings of the router can be configured. Use a network cable to connect the router to the network port of your computer. Type in the IP address 192.168.2.1 in the address field of your web browser and log in using the following credentials:
Username: admin Password: admin01
Change LTE router settings
The LTE router needs to be configured manually through the router web interface. Elvaco can provide the router pre-configured.
Change the APN
Go to Network -> Interfaces -> MOB1S1A1 and set Auto APN to off. Type in the APN you want to use and click on Save & Apply.
Lock the IP address
By using static IP address settings, a fixed IP address will be used for a connecting device, for example an M-Bus Gateway. To use static IP adress setting, go to Network -> LAN. Select a hostname and type the MAC address and a desired IP address for the connecting device. Click Add and then Save.
Change LTE router web interface password
To change the password used to log in on the LTE router web interface, go to System -> Administration. Type in the new password you want to use and confirm it. Click Save.
Set a port forwarding rule
In the LTE router web interface, your own port forwarding rules can be defined. Go to Network -> Firewall -> Port Forwarding. Find the New Port Forward Rule section, select a name for the rule and choose “TCP” as protocol. The selected external port will be used by the LTE router to connect to the WAN network and the selected internal port will be used by the external device to connect to the router (when connecting a metering gateway to the LTE router, port 80 is normally used as internal port). Type the IP address of the connecting device. Click Add and then Save.
SETTING UP M-BUS METERING GATEWAY
See quick manual of CMe3100. Go to www.elvaco.se.
TECHNICAL SPECIFICATIONS
Mechanics
Protection class
IP65
Mounting
Wall-mount
Electrical connections
Supply voltage
From mains
Electrical characteristics
Nominal voltage
100-240 VAC (+/- 10%)
Frequency
50/60 Hz
Power consumption
See product label
ORDERING INFORMATION
Part number Description
1100422
CGc LTE 1×8 M-Bus CM-Box 14
1100423
CGc LTE 1×32 M-Bus CM-Box 14
1100437
CGc LTE 1×32 M-Bus CM-Box 14 (with CMeX10S)
1100424
CGc LTE 1×64 M-Bus CM-Box 14 (with CMeX11S)
1100425
CGc LTE 1×128 M-Bus CM-Box 14 (with CMeX12S)
1100426
CGc LTE 1×256 M-Bus CM-Box 14 (with CMeX13S)
1100474
CGc LTE 1×512 M-Bus CM-Box 14 (with 2*CMeX13S)
1100319
CGc LTE 1×8 Enhanced WM-Bus and LTE router (868MHz)
1100465
CGc LTE 1×8 Enhanced WM-Bus and LTE router (434MHz)
1100427
CGc LTE StreamMode Amplified WM-Bus CM-Box 14 (868MHz)
1100428
CGc LTE StreamMode Amplified WM-Bus CM-Box 14 (434MHz)
ACCESSORIES
Part number Description
9950735
Omni antenna 5 dB 145 cm 433 MHz
9950472
Omni antenna 5 dB 868 MHz
9950500
Omni antenna 0 dB 868 MHz
SAFETY
The warranty does not cover damage to the product caused by usage in any other way than described in this manual. Elvaco AB can not be liable for any personal injury or property damage caused by usage in any other way than in this manual.
CONTACT INFORMATION
Elvaco AB Technical support: E-mail: support @elvaco.com Online: www.elvaco.com
© 2025, Elvaco AB. All rights reserved. The documentation and product are provided on an “as is” basis only and may contain deficiencies or inadequacies. Elvaco AB takes no responsibility for damages, liabilities or other losses by using this product. No part of the contents of this manual may be transmitted or reproduced in any form by any means without the written permission of Elvaco AB. Printed in Sweden.
CGc LTE Box Quick manual A4 English Document id: 1090146 Version: 1.3
Documents / Resources
 |
Elvaco CMe3100 M-Bus Metering Gateway with an LTE Router included [pdf] User Guide CMe3100, CMe3100 M-Bus Metering Gateway With an LTE Router included, CMe3100, M-Bus Metering Gateway With an LTE Router included, Gateway With an LTE Router included, Router included, included |