Mesh WiFi
Installation
devolo Mesh WiFi 2
When operated normally, all adapters should be plugged into power sockets on the wall. Ideally, however, the adapters should be initially set up in the room where the router is. This means you can plug the adapters into a power strip temporarily for the installation process.
A. Installation via App
Download now!
devolo Home Network App
https://www.devolo.com/homenetworkapp
Download the devolo Home Network app. An installation wizard will take you through the configuration step-by step. If you prefer to carry out the installation without the app, follow the steps in Part B.
1B Installation without App
Plug-in Adapter 1 + 2
Plug two of the adapters into an available power socket and wait until the LED flashes white quickly (about 1 min.).
2B Plug-in Adapter 3
Plug the third adapter into the power socket and connect it to your router with the included Ethernet cable.
3B Automatic Pairing
The encryption process takes place automatically. During this time, the LEDs of all adapters will flash white.
4B WPS Configuration
Press the button on adapter 1.
5B WPS Configuration
Within 2 minutes, press the WPS button on your Wi-Fi router. If necessary, please refer to the manual for your router to find the location of the WPS button and how long you have to press it.
6B Switch off Router
Once the LEDs of all devices are flashing white continuously, the process is complete (a maximum of 3 minutes).
Now switch off the Wi-Fi on your router (if necessary, refer to the manual for your router).
7B devolo Mesh WiFi
All devolo Mesh WiFi devices now form a joint Mesh Wi-Fi network. You can now put the adapters in whatever locations you choose.
PLC button
Duration of the |
Action |
LED behavior |
1 second | Start pairing with other devolo adapters | Flashes white |
> 10 seconds | Reset devolo adapter to factory settings | Lights up red |
PLC LED |
The devolo Mesh WiFi adapter … |
LED behavior |
|
Lights up white | |
|
Quickly flashes white | |
|
Slowly flashes white | |
|
Alternately flashes white and red | |
|
Flashes red | |
|
Lights up white and then briefly flashes red | |
|
Lights up red | |
|
None |
Wi-Fi button
Duration of the button press |
Action |
LED behaviour |
1 second | WPS function is being carried out | Flashes white |
> 3 seconds | Wi-Fi is being switched off | LED goes out |
Wi-Fi LED![]() |
The devolo Mesh WiFi adapter … |
Lights up white |
|
Flashes white | |
|
Off | |
|
Lights up white |
* On page 35 you will see how to carry out manual pairing.
Help: Manual Pairing
Help: If pairing during initial installation was unsuccessful, you can carry out the manual pairing of the adapters.
Connect the devolo adapters to a free wall socket and wait until the LED lashes white (approx. 1 min.).
Press the button on all devolo adapters within 3 minutes. Once all LEDs light up white, the pairing has been completed successfully.
Support:
Deutschland | www.devolo.de/support | |
Schweiz/Suisse/Svizzera | www.devolo.ch/support | fr.devolo.ch/support |
UK | www.devolo.co.uk/support | |
France | www.devolo.fr/support | |
Italia | www.devolo.it/supporto | |
España | www.devolo.es/soporte | |
Portugal | www.devolo.pt/suporte | |
Nederlands | www.devolo.nl/support | |
Belgien/Belgique/Belgie | www.devolo.be/support | |
Sweden | www.devolo.se/support | |
Other countries | www.devolo.com/support |
Warranty: 3 years
If your devolo device is found to be defective during initial installation or within the warranty period, please contact the vendor who sold you the product. The vendor will take care of the repair or warranty claim for you. The complete warranty conditions can be found at www.devolo.com/warranty.
devolo AG
Charlottenburger Allee 67
52068 Aachen
Germany
devolo.com
46166/0820
Documents / Resources
![]() |
devolo devolo Mesh WiFi 2 [pdf] Installation Guide devolo, Mesh, WiFi 2 |