Vacon 20 X – Control Keypad
vacon 1
VACON 20 X – CONTROL KEYPAD
1.1 mounting instructions
Document code: DPD00985A
1.1.1 Mounting onto the drive
Figure 1. Drive and the optional keypad kit.The optional keypad kit includes: keypad and cable.
Figure 2. Disconnection of the HMI cap from the drive.
Figure 3. Mounting of the keypad. 
Figure 4. Tighten the two screws of the keypad cable to the enclosure of the drive. Keypad mounted onto the drive.
Service support: find your nearest Vacon service center at www.vacon.com
Documents / Resources
 |
Danfoss Vacon 20 X Control Keypad [pdf] Instruction Manual 20 X, Vacon 20 X Control Keypad, Vacon 20 X, Control Keypad, Keypad |