Manuals+

VACON 20 X Control Keypad Mounting Instructions

1. VACON 20 X - CONTROL KEYPAD

1.1 MOUNTING INSTRUCTIONS

Document code: DPD00985A

1.1.1 MOUNTING ONTO THE DRIVE

Figure 1: Drive and the optional keypad kit. The VACON drive unit is depicted alongside the optional keypad kit. This kit includes the keypad and its connecting cable. The drive unit features indicator lights labeled PWR, RUN, FLT, and RDY.

Figure 2: Disconnection of the HMI cap from the drive. This illustration shows the procedure for detaching the HMI (Human-Machine Interface) cap from the VACON drive unit.

Figure 3: Mounting of the keypad. This diagram illustrates the process of physically attaching the keypad to the drive unit.

Figure 4: Tighten the two screws of the keypad cable to the enclosure of the drive. Keypad mounted onto the drive. This image shows the final step where two screws are tightened to secure the keypad cable to the drive's enclosure, completing the keypad's mounting onto the drive.

For service support, find your nearest Vacon service center at www.vacon.com.

Models: 20 X, Vacon 20 X Control Keypad, Vacon 20 X, Control Keypad, Keypad

File Info : application/pdf, 2 Pages, 178.80KB

PDF preview unavailable. Download the PDF instead.

AN361179456734en-000101

References

Danfoss A/S GPL Ghostscript 9.55.0

Related Documents

Preview Vacon 100 X AC Drive Technical Specifications and North American Installation Guide
Detailed technical data, cable and fuse sizing for North America, and UL cabling standards for Vacon 100 X AC Drives. Includes installation guidance and torque specifications for MM4, MM5, MM6 models.
Preview VACON 20 X AC Drive Technical Data and Installation Guide
Technical specifications, cable and fuse sizing, and installation guidelines for the VACON 20 X AC Drive, including UL standards for cabling in North America.
Preview VACON 100 X AC Drives Installation Manual
Comprehensive installation manual for VACON 100 X AC drives, covering safety guidelines, power and control cabling, mounting procedures, technical specifications, and optional features. Essential guide for installers and maintenance personnel.
Preview Vacon 20 X AC Drive Technical Data and Cabling Guide
Technical specifications, cable and fuse sizing, and UL cabling standards for the Vacon 20 X AC Drive, including installation details for North America.
Preview Vacon 100 X AC Drive Technical Data and Installation Guide
Technical specifications, cable and fuse sizing, and installation guidelines for the Vacon 100 X AC Drive, including North American requirements and UL standards.
Preview Vacon 100 X Mains Switch Mounting Instructions
Mounting instructions for the Vacon 100 X Mains Switch option, including MM5 example.
Preview VACON NX APFIFF41 Advanced High Speed Application Manual - Configuration and Operation Guide
This application manual provides comprehensive guidance on the VACON NX APFIFF41 Advanced High Speed application for VACON NX AC drives. It covers setup, parameter configuration, I/O control, motor control features, and operational details for high-performance industrial applications.
Preview Vacon 100 Industrial, Flow, HVAC, and X AC Drives I/O Option Boards User Manual
This user manual provides detailed information on the installation, configuration, and technical specifications of Vacon 100 series AC drives' I/O option boards, including Type 'B' and 'F' boards. It covers general information, board slots, technical data, isolation, input/output configurations, hardware protections, type identification, programming, and specific details for boards like OPTB1, OPTB2, OPTB4, OPTB5, OPTB9, OPTBF, OPTBH, OPTF3, and OPTF4.