IMPORTANT PRODUCT INFORMATION
SAFETY INFORMATION
Use Responsibly. Read all instructions and safety information before use.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE
WARNING: Small parts contained in your device and its accessories may present a choking hazard to small children.
Your Blink Sync Module XR is for indoor use only. Do not expose your Blink Sync Module XR or adaptor to liquids. If your device or adaptor gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adaptor to dry completely before plugging them in again. Do not attempt to dry your device or adaptor with an external heat source, such as a microwave oven or a hair dryer. If the device or adaptor appear damaged, discontinue use immediately. Use only accessories supplied with the device to power your device.
PRODUCT SPECIFICATIONS
Device Name: Sync Module XR
Model Number: BSM00500U
Electrical Rating: 5V DC, 1A
Operating Temperature: 32°F to 95°F (0°C to 35°C)
Supplier’s Declaration of Conformity - Compliance Information Statement
Device Name: Sync Module XR
Model Number: BSM00500U
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party and Party issuing Supplier’s Declaration of Conformity:
Amazon.com Services LLC, 410 Terry Avenue North, Seattle, WA 98109, U.S.A. blinkforhome.com/pages/certifications
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device meets the FCC Radio Frequency Emission Guidelines. Information on the product is on file with the FCC and can be found by inputting such Product’s FCC ID (which can be found on the device) into the FCC ID Search form available at fcc.gov/oet/ea/fccid.
This device complies with radio frequency radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other product antenna or transmitter.
Innovation, Science and Economic Development Canada (ISED) Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon.com/devicesupport. For information regarding Amazon’s recycling program, visit https://amazonrecycling-us.re-teck.com/recycling/home.
ADDITIONAL SAFETY & COMPLIANCE INFORMATION
For additional safety, compliance, recycling and other important information regarding your device, please refer to the Legal and Compliance section of the About Blink menu in the Settings in your app or on the Blink website at https://blinkforhome.com/safety-and-compliance
BLINK TERMS & POLICIES
By purchasing or using the product, you agree to the Terms of Service found at https://blinkforhome.com/blink-terms-warranties-and-notices
For information on our warranty and any other applicable policy, visit https://blinkforhome.com/blink-terms-warranties-and-notices.
Amazon.com Services LLC, 410 Terry Avenue North, Seattle, WA 98109, U.S.A.
©2023 Amazon.com, Inc. or its affiliates. Amazon, Blink, and all related marks are trademarks of Amazon.com, Inc. or its affiliates.
Documents / Resources
 |
Blink Smart Security BSM00500U Blink Sync Module XR [pdf] Instructions BSM00500U Blink Sync Module XR, BSM00500U, Blink Sync Module XR, Sync Module XR, Module XR |
