FGK21C

QUICK START GUIDE

WHAT’S IN THE BOX

KNOW YOUR NUMERIC KEYPAD

Dual Modes Num Lock

1. Synchronous (Default)
2. Asynchronous
   (Press NumLock Key for 3s)

CONNECTING 2.4G DEVICE

1

1. Plug the receiver into the computer USB port.
2. Use the Type-C adaptor to connect the receiver with the computer’s Type-C port.

2
Turn the numeric keypad’s power switch to on.

CHARGING & INDICATOR

LOW BATTERY INDICATOR

Flashing Red light indicates when the battery is below 25%.
TYPE-C RECHARGEABLE

TECH SPEC

Connection: 2.4G Hz	Keycap: Low-Profile
Operation Range: 10~15 m	Keys No.: 18
Report Rate: 125 Hz	Character: Laser Engraving
Charging Cable: 60 cm	Size: 87 x 124 x 24 mm
System: Windows 7/8/8.1/10/11	Weight: 88 g (w/ battery)

WARNING STATEMENT

The following actions may/will cause damages to the product.

1. To disassemble, bump, crush, or throwing into fire, you may cause irrefutable damages in event of the lithium battery leakage.
2. Do not expose under the strong sunlight.
3.  Please obey all local laws when discarding the batteries, if possible please recycle it.
   Do not dispose it as household garbage, it may cause a fire or an explosion.
4. Please try to avoid charging in the environment below 0℃.
5.  Do not remove or replace the battery.
6. Forbidden to use 6V to 24V charger, otherwise the product will be burned.
   Recommended to use a 5V charger for charging.

http://www.a4tech.com

Documents / Resources

A4TECH FGK21C Wireless Rechargeable Numeric [pdf] User Guide FGK21C Wireless Rechargeable Numeric, FGK21C, Wireless Rechargeable Numeric, Rechargeable Numeric, Numeric

References

• User Manual