Netatmo Smart Door and Window Sensors
Product Overview
This document provides information for the Netatmo Smart Door and Window Sensors.
The sensors detect when a door or window is opened or closed, providing real-time alerts and contributing to home security.
Available Languages: English, French, German, Spanish, Italian, Portuguese, Norwegian, Danish, Czech, Polish, Japanese, Russian, Bulgarian, Greek, Croatian, Latvian, Lithuanian, Hungarian, Maltese, Romanian, Slovenian, Slovak, Finnish, Swedish, Turkish, Estonian.
More languages are available at https://sensors.netatmo.com.
Installation Guidance
Important Installation Steps:
- ! Do not affix the Smart Door and Window Sensors until the setup process is fully complete.
- ! Insert batteries into the sensors only when prompted by the Netatmo Security App.
To begin installation:
- Open the Netatmo Security App.
- Navigate to the Settings menu.
- Select "Install new products".
- Choose "Smart Door and Window Sensors".
- Follow the on-screen instructions within the app to complete the setup.
Compliance and Safety Information
EU Declaration of Conformity
Hereby, NETATMO declares that the radio equipment type DTG01 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.netatmo.com/declaration/dtg.
Company: Netatmo SAS, 73/77 rue de Sèvres, 92100 Boulogne-Billancourt, France.
Wireless Connectivity: Bluetooth Low Energy: 2400-2483.5 MHz @ 2.5 mW; Long-range radio: 868.9-869.1 MHz, 869.7-869.9 MHz @ 16mW.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The equipment complies with FCC RF radiation exposure limits for an uncontrolled environment, requiring a minimum distance of 20 cm between the radiator and the user's body.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003.
Taiwan Wireless Statements
This product complies with the regulations of the Low Power Radio Frequency Device Management Act, Articles 12 and 14.
Safety Warnings
This device is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised by a responsible adult. Children should be supervised to ensure they do not play with the appliance.
Before inserting batteries:
- Ensure device and battery contacts are clean.
- Observe correct polarity (+/-) when inserting batteries.
- Do not expose batteries to fire, short-circuit them, or dismantle them.
- Keep batteries away from children.
- Seek immediate medical attention if a battery is swallowed.
Limited Warranty (Australia)
For purchases within Australia, goods are covered by guarantees that cannot be excluded under the Australian Consumer Law. This includes entitlement to replacement or refund for a major failure and compensation for other foreseeable loss or damage. Goods will be repaired or replaced if they fail to be of acceptable quality and the failure is not major. The warrantor is Netatmo Limited, Hong Kong. The warranty period is 12 months from purchase from an authorized reseller. Misuse, normal wear and tear, and product modifications are not covered. Batteries and bracelets are excluded as they are expected to be replaced regularly.
Product Identification
FCC ID: N3A-DTG01
IC: 10860A-DTG01
Copyright Netatmo © 2020. All rights reserved.
Reproduction and distribution prohibited without written authorization from Netatmo.
Support: https://support.netatmo.com