Flydigi Apex 4 Elite Gaming Controller
User Manual
Joystick Adjustment Instructions
- Pull the joystick cap vertically upwards and remove the cross key.
- Along the grip seam, remove the magnetic outer casing, and take out the adjustment dial from the right side of the controller.
- Rotate the screw on the right side of the joystick with the dial to adjust the joystick's resistance. You can memorize the current joystick resistance by aligning the edge of the cap with the scale. Installing the joystick cap during adjustment allows you to feel the joystick's resistance in real-time.
Switch Connection
To switch to Switch mode, click the controller icon on the Switch homepage to enter [Change Grip/Order] for automatic pairing.
Press + and L on the controller you wish to use.
After preparation is complete, press 2.
Button and Key Value Mapping for Switch Mode
>| B | X | Y | SELECT | START | Switch | |||
|---|---|---|---|---|---|---|---|---|
| A | Y | X | + | Home | Screenshot |
For Android/iOS Devices
Scan the QR code to download and install the Flydigi Game Center APP.
In Flydigi Game Center, go to Peripheral Management, click Add Device, and follow the in-app guide to connect the controller.
Specifications
| Platform | Mode | Connection Method | System Requirements |
|---|---|---|---|
| PC | XInput/DInput | Receiver/Wired/Bluetooth | Win 7 and above |
| Switch | Switch | Bluetooth | Switch |
| Android | DInput/Flashplay | Bluetooth | Android 10 and above |
| iOS | iOS | Bluetooth | iOS 14 and above |
XInput Mode: Suitable for most games that natively support controllers.
DInput Mode: Suitable for simulator games that natively support controllers.
Flashplay Mode: Suitable for mobile games that do not natively support controllers; requires Flydigi Game Center.
Wireless Radio: Bluetooth 5.0, Bluetooth 5.0 BLE
Effective Distance: Less than 10 meters
Battery Information: Rechargeable lithium-ion battery, 1500mAh capacity, charging time 3-4 hours, charging voltage 5V, charging current 1000mA.
Working Current: Less than 80mA during use (excluding motor and force feedback triggers), standby current less than 0.1mA.
Temperature Range: For use and storage between -10℃ to 50℃.
