Flydigi Dune Fox Gaming Controller
User Manual
This document serves as the user manual for the Flydigi Dune Fox Gaming Controller. It provides instructions on connecting the controller to various devices, its functions, customization options, and basic operations.
The initial page suggests scanning a QR code to read the user manual, implying this document is a digital version or supplement.
Connect to PC via Bluetooth/Wired
To connect your Flydigi Dune Fox controller to a PC:
- Ensure your PC has Bluetooth functionality and that Bluetooth is turned on.
- On your PC, navigate to "Add a device" and select the Bluetooth option.
- Press the [Y] button on the controller. Its white indicator light will flash rapidly, indicating it's in pairing mode.
- On the PC interface, select "Xbox Wireless Controller" from the list of available devices.
- The controller will vibrate briefly, and the white indicator light will remain solid, signifying a successful connection.
- For subsequent uses, with the controller powered off, briefly press the [Y] button. The controller will wake up and automatically connect.
Note on connecting to other Bluetooth devices: Hold the controller's [O] + [Y] buttons for 3 seconds. The indicator light will flash rapidly to re-enter pairing mode. If connection fails, delete the device from your PC's Bluetooth settings and try again.
Connect to Android Device
To connect your Flydigi Dune Fox controller to an Android device:
- Turn on Bluetooth on your Android phone and go to the Bluetooth device page.
- With the controller powered off, briefly press the [Y] button. The controller will wake up, and its white light will flash rapidly to enter pairing mode.
- From the list of available devices on your phone, select "Xbox Wireless Controller".
- The controller will vibrate briefly, and the white indicator light will stay on, indicating a successful connection.
Note on connecting to other Bluetooth devices: Press and hold the controller's [O] + [Y] buttons for 3 seconds. The indicator light will flash rapidly to re-enter pairing mode. If you are unable to connect, please select the controller from your phone's Bluetooth settings to unpair it.
Connect to Nintendo Switch
To connect your Flydigi Dune Fox controller to a Nintendo Switch:
- On the Switch homepage, click the controller icon to enter "[Change grip/order]".
- Long press the controller's [O] + [B] buttons for three seconds. The controller's blue light will flash rapidly, entering Switch pairing mode.
- Follow the prompts on the Switch to operate the controller. A brief vibration and a constant blue indicator light confirm a successful connection.
- For future use, when the controller is powered off, briefly press the [Y] button. The controller will wake up and automatically connect.
Button Mapping in Switch Mode
The button and button-value mapping relationship in Switch mode is as follows:
| Controller Button | Switch Function |
|---|---|
| [A] | [B] |
| [B] | [A] |
| [X] | [Y] |
| [Y] | [X] |
| [L] | - |
| [R] | + |
| [Home] | Home Page |
| [Share/Screenshot] | Screen shot |
| [FN] | Tubro |
Two players are also supported by pressing [L] + [R] on the controller.
Flydigi Space Station for More Customization
Visit the official website www.flydigi.com to download "Flydigi Space Station". This application allows you to customize buttons, macros, Somatosensory features, joystick settings, and other functions.
- Button Mapping: Map buttons to controller, mouse, or keyboard functions.
- Macro Definition: Set up Turbo, record joystick and button data to simplify complex operations.
- Automatic Turn Off Time: Adjust the automatic turn-off time for the controller.
- Joystick Adjustment: Set the dead zone and sensitivity curve for the joysticks.
Set Rapid Fire/Macro On The Fly
The Dune Fox supports quick setup for combination keys for rapid fire and macro functions. Please scan the QR code on the homepage to view the specific setup method.
Basic Operations
- Power On: Short press the [Y] button.
- Power Off: Long press the [Y] button for 5 seconds (or the controller will automatically turn off after 15 minutes of inactivity).
- Low Battery: Indicator light flashes red.
- Charging while powered off: Indicator light stays red.
- Fully charged while powered off: Indicator light stays green.
Switch Between Platforms
The controller supports switching between different platforms and modes. The table below outlines the key combinations, compatible platforms, indicator lights, and system requirements.
| Mode | Key Combination | Compatible Platforms | Indicator Light | System Requirements |
|---|---|---|---|---|
| ? Bluetooth | [O] + [Y] for three seconds | PC/Android/iOS | White | Windows 7 and above, Android 10 and above, iOS 14 and above |
| ? NS | [O] + [B] for three seconds | Switch | Blue | NS Platform |
| ? PC (Dongle) | [O] + [A] for three seconds | PC | Yellow | Windows 7 and above |
Other Operations
| Function | Shortcut Key | Description |
|---|---|---|
| Rapid Fire Function | [Square] + Target Rapid Fire Key | After successful activation, the indicator light will flash during rapid fire. |
| Disable Rapid Fire | [Square] + Target Disable Key | Restore default button functions. |
| Rapid Fire Frequency | [R] + [Up Arrow]/[Down Arrow] | At 7Hz, the indicator light flashes at 5Hz for 0.5 seconds. At 15Hz, the indicator light flashes at 15Hz for 0.5 seconds. At 20Hz, the indicator light flashes at 30Hz for 0.5 seconds. |
| Vibration Intensity | [O] + [R] + [Up Arrow]/[Down Arrow] | Vibration levels include: 0% - 30% - 60% - 100% |
| Switch XInput | [O] + [Menu] for 3 Seconds | Bluetooth Mode: White light Dongle Mode: Yellow light NS Mode: Blue light |
| Switch to DInput | [O] + [Menu] for 3 seconds | Bluetooth Mode: Purple light Receiver Mode: Cyan light |
| Turn On/Off The Joystick Dead Zone | [O] + [Menu] + [Up Arrow]/[Down Arrow] for 3 seconds | You can switch between 5% dead zone and 0 dead zone. |
| Switch Onboard Configuration | [O] + [A]/[B]/[X]/[Y] | Onboard Configurations: 1/2/3/4. This function is disabled by default and can be enabled through the Space Station. |
| Clear Pairing Information | [O] + [Y] for 3 seconds | Clear pairing information in the current mode; the indicator light will flash and re-enter pairing mode. |
| Calibration | [O] + [Menu] + [Up Arrow] for 3 seconds | Red light flashes slowly (0.5Hz): Press the left and right triggers twice, rotate the left and right sticks two full circles. Short press [O] + [Menu] + [Up Arrow] to exit calibration mode. |
| Restore Factory Settings | [LB] + [RB] for 5 seconds | Clear pairing information in all modes. After successful restoration, the controller will vibrate for 0.5 seconds. |
Mode Explanations:
- XInput mode: Suitable for the vast majority of games that natively support controllers.
- DInput mode: For emulator games that natively support controllers.
Technical Specifications
- Wireless RF: Bluetooth 5.3
- Service distance: Less than 5 meters
- Battery information: Rechargeable lithium-ion battery, capacity 600mAh, charging time 3 hours, charging voltage 5V, charging current 300mA.
- Operating current: Less than 45mA when in use, less than 10µA in standby.
- Temperature range: Use and storage at -10°C ~ 50 °C.
Appearance
The controller features a distinct design with labeled components:
- Top Face: Hall-Effect Joystick, Select button, FN button, Membrane Rotary-Pivoted D-pad, ABXY buttons (labeled Y, X, B, A), Start button, Tubro button, Indicator Light.
- Shoulder/Triggers: RB (Right Bumper), RT (Right Trigger).
- Bottom Face: Reset button.
The controller also includes a central logo and a connection port (likely USB-C, though not explicitly labeled in the diagram).
Frequently Asked Questions (FAQ)
- Q: The controller can't connect?
-
A: Ensure the controller's indicator light color corresponds to the correct mode.
- For Bluetooth pairing: Press and hold the [O] + [Y] buttons for 3 seconds; the indicator light will flash rapidly, and the controller will enter pairing mode.
- For dongle pairing: Insert the receiver into the computer's USB port and use a pin to press the small hole on the receiver to complete the pairing.
- For BT pairing after forgetting/deleting the device in BT settings: Press and hold the [O] + [Y] buttons for 3 seconds; the indicator light will flash rapidly, and the controller will re-pair with the device.
- Q: How do I upgrade the controller's firmware?
- Install the Flydigi Space Station on your computer or the Flydigi Game Center on your mobile device, and follow the software prompts to upgrade the firmware.
- Q: What should I do if the joystick/triggers/motion sensing are abnormal?
- Install the Flydigi Space Station on your computer, go to the testing page, and follow the guide to calibrate the controller.
Product Compliance and Safety Information
Harmful Substances in the Product
This table details the presence of certain hazardous substances in the product's components, prepared according to SJ/T 11364.
| Part Name | Harmful Substances | |||||
|---|---|---|---|---|---|---|
| Pb | Hg | Cd | Cr(VI) | PBB | PBDE | |
| PCB Borad | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Shell | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Packaging | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Wire | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Polymer Battery | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Silicone | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Small structural parts such as metal and tape | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
⚪ Indicates that the content of the hazardous substance in all homogeneous materials of this part is within the limit specified in GB/T 26572-2011.
❌ Indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the provisions of GB/T 26572-2011.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
