KROFT Peg Rail Instruction Manual

Product Information: PEG RAIL KROFT

The PEG RAIL KROFT is a wall-mounted peg rail designed to provide convenient storage and organization. It comes with either 4 or 6 pegs, allowing you to customize the number of hooks according to your needs. The rail is made of high-quality materials, ensuring durability and stability.

Product Included Hardware

• Screw x 2
• Drywall Anchor x 2

Product Recommended Tools

• Drill
• Level

Product Usage Instructions

1. 1. Paired with a level, place the peg rail against the wall at the desired height. Make a marking through each open hole onto the wall.

TIP: When drilling the hole, be sure to keep the drill bit level. This will ensure the rail is mounted flush to the wall.

1. Insert drywall anchors into the drilled holes. A hammer may be used to gently tap the anchor until it is flush with the wall, taking care not to drive the collar of the anchor beneath the surface of the wall.
2. Insert screws through the peg rail and into the drywall anchors. Using a screwdriver or drill, drive screws into place to secure the peg rail to the wall.
3. Insert pegs into holes concealing the hardware beneath.
4. Your PEG RAIL KROFT is now securely installed and ready for use!