Instruction Manual for KROFT models including: Peg Rail, Peg, Rail

Peg Rail Assembly Instructions

here.

Peg Rail — KROFT Find more photos on Instagram and product specs

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 10 Pages, 186.69KB

Document Document

PEG RAIL KROFT

4 Pegs

26" 
1 ¹/"

2 ¹/"

6 Pegs

41" 
1 ¹/"

2 ¹/"

INCLUDED HARDWARE:

Screw x 2

Drywall Anchor x 2

RECOMMENDED TOOLS:

Drill

Level

1. Paired with a level, place the peg rail against the wall at desired height. Make a marking through each open hole onto the wall.

2. Using a ¼" drill bit, drill two holes through wall at marked points.
TIP When drilling the hole, be sure to keep the drill bit level. This will ensure the rail is mounted flush to the wall.

3. Insert drywall anchors into the drilled holes.
A hammer may be used to gently tap the anchor until it is flush with the wall, taking care not to drive the collar of the anchor beneath the surface of the wall

4. Insert screws through the peg rail and into the drywall anchors. Using a screwdriver or drill, drive screws into place to secure peg rail to the wall.

5. Insert pegs into holes concealing the hardware beneath.

Done!