Konstsmide-logo

Konstsmide B06XJ3822Z Extension for LED System

Konstsmide-B06XJ3822Z-Extension-for-LED-System-Product

Specifications

  • Power: 6 W
  • IP Rating: IP44
  • Voltage: 31 V
  • Voltage Level: High voltage
  • Material: Plastic
  • Color Temperature: 2100 – 2200 K
  • Luminous Flux: 1120 lm
  • Dimensions: L255* H75 cm* B250 cm

Installation

  1. Choose a suitable outdoor location for the LED system extension.
  2. Ensure the power source is compatible with the specified voltage.
  3. Uncoil the black soft cable and position the light chain as desired.
  4. Secure the extension in place using appropriate fixtures or hooks.

Operation

Once installed, connect the LED system extension to a power source matching the voltage requirements. The amber-colored diodes will emit light with a color temperature of 2100 – 2200 K, providing a luminous flux of 1120 lm.

Maintenance

  • Regularly check for any damage to the cable or diodes.
  • Clean the diodes and cable gently with a soft cloth if needed.

Safety information
Ensure that the power supply is disconnected before installation. Select suitable surfaces and install in ventilated areas. Tested for safety by EN 60598-1.

Risk assessments
Risk of overheating or short circuit due to incorrect installation or unsuitable voltage. Warnings: Protect mains-powered lights from moisture and only use them for the intended voltage. Use cables by VDE 0295 / IEC 60228.

Disposal instructions
Dispose of mains-powered lights at collection points for electrical waste by ElektroG.

Item number: 7318308118079
ASIN: B06XJ3822Z
GTIN: 7318308118079
WEEE number: 49669772;89633988
Large appliances that can be used in private households.

Manufacturer information
Konstsmide GmbH Hauptstraße 12 96484 Meeder Deutschland info@konstsmide.de

FAQs

Q: Can this LED system extension be used indoors?
A: No, this product is designed for outdoor use with an IP44 rating for protection against water splashes.

Q: What is the length of the soft black cable?
A: The dimensions of the LED system extension include a cable length of approximately L255cm.

Documents / Resources

Konstsmide B06XJ3822Z Extension for LED System [pdf] Instruction Manual
B06XJ3822Z Extension for LED System, B06XJ3822Z, Extension for LED System, LED System

References

Leave a comment

Your email address will not be published. Required fields are marked *