komei KM-2024 Web Compound Razor User Guide
Before use:
- Please read the manual carefully before the first use. It will be helpful for better performance of the shaver.
Charging:
- The switch must be turned off when charging Make if fully charged before use it.
- Turn off the switch, open the waterproof plug at the end of the shaver connecting to the USB cord, and connect the other end to the adapter with output 5V 1000mA.
- The indicator light will be red when charging; and the standard charging time is 8 hours.
Specifications:
| Model | Type-C | power | IP Rating |
| KM-2024 | Input: 5Vm | 3W | IPX4 |
Maintenance for blade and foil:
- Turn off the switch, hold the body with right hand; and the left hand hold the two sides of the head to pull outward.
- Clean it with brush, fig3 and 4.
- To install the head
Replacement method for foil:
- Turn off the switch
- Take off the shaver head; and remove the foil from the inside of the head as shown in figs.
- Install the outer foil, first bend the foil gently as shown in Fig.6, and then put the foil into the head gently from the bottom until it is fixed.
Operation:
- Please take away the protector and switch to ON position.
- Remove your unwanted hair by slightly moving this unit against the skin at right angle.
Maintenance:
- Clean the unit after 2 to 3 times shaving, and then oil it. In this way, the shaver would be better
Warning:
- Please keep the shaver dry
- Do not charge continuously for more than 24 hours, and do not charge at temperatures below O Cor above 40℃. Otherwise, the battery life will be shortened.
Contents
hide
Documents / Resources
 |
komei KM-2024 Web Compound Razor [pdf] User Guide S48dc76e99fb34534, afc32a34a5d11bf1D, KM-2024 Web Compound Razor, KM-2024, Web Compound Razor, Compound Razor, Razor |