Installation manual
http://kolo.com.pl/porady/videoporady_montaz_stalaza_Technic_Gt
GT-WC element with the SMART FRESH system
NOTE!
If damage to the product or other property occurs due to a failure to follow these recommendations, the guarantee shall cease to be valid and therefore Sanitec Kolo shall not be liable for any damage.
- The assembly instructions should always be followed.
- Only original parts should be used.
- The sanitary systems should be installed according to generally accepted building practices.
- Before assembling, the process rinses carefully water pipes.
- In the case of any leaks from the system, it should be always possible for a professional to perform an inspection and any necessary repair.
- Ensure all water joints are free from leaks before permanently building in the frame. Several complete tank filling and flushing cycles should be carried out.
Revision no 4
22.05.2014
www.kolo.eu
Documents / Resources
 |
KOLO GT-WC element with the SMART FRESH system [pdf] Installation Guide GT-WC element with the SMART FRESH system, element with the SMART FRESH system, SMART FRESH system, FRESH system |
