kogan com NBAUTOSPDSA Automatic Soap Dispenser User Guide

NBAUTOSPDSA Automatic Soap Dispenser

“

Specifications

• Product Name: Automatic Soap Dispenser
• Model Number: NBAUTOSPDSA
• Dispensing Levels: Low, Medium, High
• Charging Port: USB
• Indicator Colors: Green, Red, Blue
• Cleaning Mode: Automatic

Product Usage Instructions

Assembly

1. Add foaming soap liquid into the reservoir. If using regular
   liquid soap, dilute it with water at a ratio of 1:6-10 before
   adding it to the reservoir.
2. Attach the top of the dispenser to the reservoir and rotate in
   a clockwise direction to secure it in place. Check for leaks by
   shaking the dispenser.
3. Remove the adhesive backing and attach the bracket to the wall
   in the desired location.
4. Attach the dispenser to the bracket.

Operation

Charging

1. Connect the supplied charging cable to a USB power adapter and
   plug it into an electrical outlet.

Turning the Dispenser On/Off

Press and hold the button for 2 seconds to turn the dispenser
on/off.

Dispensing Soap

1. Place hands under the sensor area and the unit will
   automatically dispense soap.
2. This product features 3 levels of dispensing (low, medium, and
   high). Press the button to cycle through the levels.
3. The indicator will display the selected level.

Automatic Cleaning

1. Replace soap with water in the reservoir, then press and hold
   the button for 10 seconds to activate automatic cleaning. The
   process will last approximately 60 seconds with the indicator
   alternately flashing blue and green.
2. Press the button to end automatic cleaning.

Notes

We hope this user guide has provided you with the necessary
information for setup. For further assistance or updates, visit
help.Kogan.com.

Frequently Asked Questions (FAQ)

Q: How do I know when the soap dispenser is running low on
battery?

A: The indicator will show a red light for 3 seconds when the
battery is low.

Q: Can I use regular liquid soap with this dispenser?

A: Yes, you can use regular liquid soap by diluting it with
water at a ratio of 1:6-10 before adding it to the reservoir.

“`

Automatic Soap Dispenser
NBAUTOSPDSA

Safety & Warnings
· Read all safety notes and instructions before first use even if you are familiar with this product. Retain this user guide for future reference.
· Use the product only as described in this user guide. · Fully charge the product before using it for the first time. · To avoid damage to the product, do not use this product with non-foaming liquid soap. · Do not rinse or immerse this product in water. Instead, clean with a damp cloth. · Place this product in a cool place, away from directly sunlight and sources of heat. · If this product is not being used for an extended period, charge it at least once every 3
months.

Overview
Nozzle Sensor Area Reservoir

Indicator Button

Bracket

Charging Port

Indicator
Condition Power on Power off Low level Medium level High level Automatically cleaning Low power Charging

Indicator Green for 3 seconds Red for 3 seconds Blue for 0.5 seconds Blue for 1 seconds Blue for 1.5 seconds Alternating green and blue for 60 seconds Flashing red Solid red

Assembly
1. Add foaming soap liquid into the reservoir. If using regular liquid soap, dilute it with water at a ratio of 1:6-10 before adding it to the reservoir.
2. Attach the top of the dispenser to the reservoir and rotate in a clockwise direction secure it in place. Carefully shake the dispenser to check for leaks.
3. Remove the adhesive backing and attach the bracket to the wall in the desired location.
4. Attach the dispenser to the bracket.
Operation
Charging
1. Connect the supplied charging cable to a USB power adapter and plug it into an electrical outlet.
2. Connect the charging cable to the USB-C charging port on the rear of the dispenser. · The dispenser will take approximately 3.5 hours to reach a full charge. · The battery will last 2-3 months on standby and approximately 1 month with frequent
usage.

Turning the Dispenser On/Off
Press and hold the button for 2 seconds to the turn the dispenser on/off.
Dispensing Soap
1. Place hands under the sensor area and the unit with automatically dispense soap. 2. This product features 3 levels of dispensing (low, medium and high). Press the button
to cycle through the 3 levels. 3. The indicator will display the level selected.

Low

Medium

High

Automatic Cleaning
1. Replace the soap in the reservoir with water then press and hold the button for 10 seconds to activate automatic cleaning. The process will last approximately 60 seconds with the indicator alternately flashing blue and green.
2. Press the button to end automatic cleaning.

Notes

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.Kogan.com.

Documents / Resources

kogan com NBAUTOSPDSA Automatic Soap Dispenser [pdf] User Guide NBAUTOSPDSA, NBAUTOSPDSA Automatic Soap Dispenser, NBAUTOSPDSA, Automatic Soap Dispenser, Soap Dispenser, Dispenser

References

• User Manual