ឧបករណ៍បញ្ជាពហុមុខងារ
Core(1PCS)-XA003
សៀវភៅណែនាំអ្នកប្រើប្រាស់
ស្នូល-A11
លក្ខណៈពិសេស
- 2.4Ghz wireless remote control, 10m control distance with an ultra-small size.
- High cost-performance ratio, suitable for car, ship, and tank models, etc.
- Provide up to 10 channels for connecting different devices.
- ការបញ្ចូលឧបករណ៍បញ្ជូន Voltage: 4.5V~12.6V（1S-3S）, operating current: 65mA.
- ការបញ្ចូលអ្នកទទួល Voltage: 7.4V-12.6V（2S-3S）, standby current: 60mA, operating current: 200~300mA, maximum current: 3A.
- Support configuration on mobile phones& PCs, with a user-friendly interface.
Receiver & Transmitter Shield
Remote Control Transmitter Shield
On the left and right sides of the transmitter shield, there are 3 ADC input channels respectively. Below it, there are 4 digital input channels. The gray slot on the back is the slot for the multi-function controller core. It can be powered through the XH2.54 power input.
- ADC input port L1~L3，R1~L3: 3pin SH1.0 slot. Connectable with single/dual axis joystick module, three-position rocker switch module, etc.
- Digital input Port K1~K4: 2-pin SH1.0 slot. Connectable with a momentary button module, etc.
- XH2.54 DC power input: 2-pin XH2.54 slot. Connectable with a 4.5V~12.6V power supply.
Remote Control Receiver Shield
On the left and right sides of the receiver shield, there are, respectively, a DC motor port and a WS2812 port. In the center, there are 4 servo ports. It can be powered through the XH2.54 power input.
- DC Motor Port M1、M2: 2pin SH1.0 slot. Connectable with a DC motor, supporting forward and reverse rotation control& PWM speed regulation.
- WS2812 Port D1、D2: 3pin SH1.0slot. Connectable with WS2812 LED hubs or other light strips that use the WS2812 protocol.
- Servo Port S1~S4: 3-pin header. Connectable with universal 5V servo motors.
- Core Slot: A double-row gray slot. Connectable with a multi-function controller core.
- XH2.54 Power Input: 2-pin XH2.54 slot. Connectable with a 7.4V~12.6V power supply.
Multi-Function Controller Core
- Stamp កាត់៖ Solderable Pinout. It allows users to solder leads to achieve customized circuit connections.
- ប៊ូតុងកំណត់ឡើងវិញ៖ Press to reset the main program.
- ប៊ូតុងអ្នកប្រើប្រាស់៖ Custom Function.
- កំពង់ផែប្រភេទ C: Type-C Port. Connect to the PC via a data cable for programming and burning the program.
- Pin Header: Pin Header. Connectable with Shield.
Hardware connection between the controller core and the remote control transmitter/receiver shield
As shown in the figure, the controller core, the remote control receiver shield, and the remote control transmitter shield have antenna symbols. When making the connection, it is necessary to ensure that the orientations of these three symbols are the same and the pins correspond to each other one by one.
Orientations of these three symbols are the same.
Pins correspond to each other one by one.
Definition of the System Status Indicator
- Powered on but not connected: green light on
- Bluetooth connected: blue light on
- 2.4GHz connected: yellow light on
- Bluetooth& 2.4GHz connected: light flashes alternately between blue and yellow
- គាំទ្រfile upgrading: green light flashes at a frequency of 2Hz and continues until the transmission ends.
- Control object recognition: The green light flashes at a frequency of 1 Hz for 5 seconds.
Connect to the RC Transmitter & Receiver on the PC client.
Power the controller core through the Type-C port or the XH2.54 Power Port on the expansion shield.
Run CyberBrick client, switch to Device Management
Click [+] to find your device
Connect the device by entering the PIN code. If the PIN hasn’t been set during the first connection, confirm directly.
After a successful connection, the indicator of the controller core lights blue, and the client displays this device.
Click on the expansion symbol in the upper right corner of the device. If you have connected multiple devices, click on Recognize, and the status indicator of the selected device will flash green; if you need to disconnect from the selected device, click on Disconnect.
Click on the device, and you can change the name of the device in the upper right corner to make it easier to identify it when there are multiple devices.
If you need to change the PIN code of the device, you can click Modify in the lower right corner and enter the new PIN code.
Configure the core controller profile
Click on the Configuration, click on Create Configuration, and start with a template, or an empty configuration[Custom].
Here we take the custom empty configuration as an example, click on Custom, and then click on Edit in the configuration list below.
After entering the configuration interface, first, click Add Receiver on the left side, and input the name of the receiver.
Click on the hardware connection above and drag the receiver device and controller device to the corresponding position.
Click to start pairing. After pairing successfully, the status indicators of these devices should flash blue and yellow alternately.
After modifying the configuration, remember to save the configuration locally with Save Config in the upper right corner, and update the configuration to the device with Send Config.
បញ្ជីនៃច្បាប់ FCC ដែលអាចអនុវត្តបាន។
FCC ផ្នែកទី 15.247
ស្លាកសញ្ញា និងព័ត៌មានអនុលោមភាព
FCC ID label on the final system must be labeled with “Contains FCC ID: 2A6J8-COREA11” or “Contains transmitter module FCC ID: 2A6J8-COREA11”.
ព័ត៌មានអំពីរបៀបសាកល្បង និងតម្រូវការធ្វើតេស្តបន្ថែម
Contact Shenzhen Tuozhu Technology Co., Ltd. will provide a stand-alone modular transmitter test mode. Additional testing and certification may be necessary when multiple modules are used in a host.
ការធ្វើតេស្តបន្ថែម ផ្នែកទី 15 ការបដិសេធផ្នែករង B
ដើម្បីធានាបាននូវការអនុលោមតាមមុខងារមិនបញ្ជូនទាំងអស់ ក្រុមហ៊ុនផលិតម៉ាស៊ីនត្រូវទទួលខុសត្រូវក្នុងការធានាការអនុលោមតាមម៉ូឌុលដែលបានដំឡើង និងដំណើរការពេញលេញ។ សម្រាប់អតីតample, if a host was previously authorized as an unintentional radiator under the Supplier’s Declaration of Conformity procedure without a transmitter-certified module and a module is added, the host manufacturer is responsible for ensuring that, after the module is installed and operational, the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this may depend on the details of how the module is integrated with the host, Shenzhen Tuozhu Technology Co., Ltd. shall provide guidance to the host manufacturer for compliance with the Part 15B requirements.
ការព្រមាន FCC
ឧបករណ៍នេះអនុលោមតាមផ្នែកទី 15 នៃច្បាប់ FCC ។ ប្រតិបត្តិការគឺស្ថិតក្រោមលក្ខខណ្ឌពីរដូចខាងក្រោមៈ
(1) ឧបករណ៍នេះប្រហែលជាមិនបង្កឱ្យមានការជ្រៀតជ្រែកដែលបង្កគ្រោះថ្នាក់ទេ ហើយ (2) ឧបករណ៍នេះត្រូវតែទទួលយកការជ្រៀតជ្រែកណាមួយដែលទទួលបាន រួមទាំងការជ្រៀតជ្រែកដែលអាចបណ្តាលឱ្យប្រតិបត្តិការដែលមិនចង់បាន។
ចំណាំ 1: រាល់ការផ្លាស់ប្តូរ ឬការកែប្រែចំពោះអង្គភាពនេះ ដែលមិនត្រូវបានអនុម័តដោយភាគីដែលទទួលខុសត្រូវចំពោះការអនុលោមតាមច្បាប់ អាចចាត់ទុកជាមោឃៈសិទ្ធិអំណាចរបស់អ្នកប្រើប្រាស់ក្នុងប្រតិបត្តិការឧបករណ៍។
សេចក្តីថ្លែងការណ៍នៃការប៉ះពាល់នឹងវិទ្យុសកម្ម FCC៖
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance.
ចំណាំ 1: This module is certified to comply with the RF exposure requirement under mobile or fixed conditions; this module is to be installed only in mobile or fixed applications.
A mobile device is defined as a transmitting device designed to be used in locations other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. Transmitting devices designed to be used by consumers or workers that can be easily relocated, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20-centimeter separation requirement.
ឧបករណ៍ថេរត្រូវបានកំណត់ថាជាឧបករណ៍ដែលមានសុវត្ថិភាពរាងកាយនៅទីតាំងមួយ ហើយមិនអាចផ្លាស់ទីបានយ៉ាងងាយស្រួលទៅទីតាំងមួយផ្សេងទៀត។
ចំណាំ 2: Any modifications made to the module will void the Grant of Certification. This module is limited to OEM installation only and must not be sold to end-users; end-user has no manual instructions to remove or install the device, only software or operating procedure shall be placed in the end-user operating manual of final products.
ចំណាំ 3: ម៉ូឌុលអាចត្រូវបានដំណើរការតែជាមួយអង់តែនដែលវាត្រូវបានអនុញ្ញាត។ អង់តែនណាដែលមានប្រភេទដូចគ្នា និងទទួលបានទិសដៅស្មើគ្នា ឬតិចជាងជាអង់តែនដែលត្រូវបានអនុញ្ញាតដោយម៉ាស៊ីនវិទ្យុសកម្មដោយចេតនា អាចត្រូវបានទីផ្សារជាមួយ និងប្រើប្រាស់ជាមួយវិទ្យុសកម្មដោយចេតនានោះ។
ចំណាំ 4: For all products marketed in the US, OEM has to limit the operation channels in CH1 to CH11 for the 2.4G band by supplying a firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.
ព្រមាន IC
ឧបករណ៍នេះមានឧបករណ៍បញ្ជូនដែលលើកលែងអាជ្ញាប័ណ្ណដែលអនុលោមតាមការបង្កើតថ្មី វិទ្យាសាស្ត្រ និងការអភិវឌ្ឍន៍សេដ្ឋកិច្ចកាណាដា ដែលលើកលែងអាជ្ញាប័ណ្ណ RSS។ ប្រតិបត្តិការគឺស្ថិតក្រោមលក្ខខណ្ឌពីរដូចខាងក្រោមៈ
- ឧបករណ៍នេះប្រហែលជាមិនបង្កការរំខានទេ។
- ឧបករណ៍នេះត្រូវតែទទួលយកការជ្រៀតជ្រែកណាមួយ រួមទាំងការជ្រៀតជ្រែកដែលអាចបណ្តាលឱ្យប្រតិបត្តិការដែលមិនចង់បានរបស់ឧបករណ៍។
សេចក្តីថ្លែងការណ៍នៃការប៉ះពាល់វិទ្យុសកម្ម IC៖
This device and its antenna(s) must not be co-located with any other transmitters except by IC multi-transmitter product procedures. Referring to the multi-transmitter policy, multiple-transmitter(s) and modules (s) can be operated simultaneously without reassessment permissive change.
ឧបករណ៍នេះអនុលោមតាមដែនកំណត់នៃការប៉ះពាល់វិទ្យុសកម្ម IC RSS-102 ដែលបានកំណត់សម្រាប់បរិយាកាសដែលមិនអាចគ្រប់គ្រងបាន។ ឧបករណ៍នេះគួរតែត្រូវបានតំឡើងនិងដំណើរការដោយមានចំងាយយ៉ាងតិច ២០ សង្ទីម៉ែត្ររវាងកាំរស្មីនិងរាងកាយរបស់អ្នក។
This module is limited to OEM installation only and must not be sold to end-users; end-user has no manual instructions to remove or install the device, only software or operating procedures shall be placed in the end-user operating manual of final products. Additional testing and certification may be necessary when multiple modules are used.
ការផ្លាស់ប្តូរ ឬការកែប្រែណាមួយដែលមិនត្រូវបានអនុម័តដោយក្រុមហ៊ុនផលិតអាចចាត់ទុកជាមោឃៈនូវសិទ្ធិអំណាចរបស់អ្នកប្រើប្រាស់ក្នុងការដំណើរការឧបករណ៍នេះ។
The end product must be labeled in a visible area with the following: “Contains IC: 28436-COREA11 “.
Multi-Function Controller Core
លក្ខណៈបច្ចេកទេសផលិតផល
| លេខធាតុ | សមាសភាគ | មុខងារ |
| 1 | W52812LED | RGB system status indicator |
| 2 | Stamp កាត់ | Solderable pinout |
| 3 | ប៊ូតុងកំណត់ឡើងវិញ | Press to reset the main program |
| 4 | ច្រក Type-C | Burning firmware & programming |
| 5 | ប៊ូតុងអ្នកប្រើប្រាស់ | មុខងារផ្ទាល់ខ្លួន |
| 6 | ខ្ទាស់បឋមកថា | Connectable with various shields |
| 7 | Orientation Mark | Ensure proper installation alignment |
| លេខសម្គាល់ផលិតផល | XA ៥០៣២ |
| គំរូ | Core A11 |
| Type-C Input Voltage | DC 5V |
| VBAT Input Voltage | 3.7V-12.6V |
| ប្រភេទអង់តែន | អង់តែន PCB |
| ចម្ងាយបញ្ជាពីចម្ងាយ | Up to 100m (in open space) |
| ទម្ងន់ | 6g |
| ទំហំ | ៧៥ * ៧៥ ម។ |
ឯកសារ/ធនធាន
 |
Tuozhu Core-A11 Multi Function Controller [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ Core-A11, Core-A11 Multi Function Controller, Multi Function Controller, Controller |