Tranquility-LOGO

Tranquility LC3040 Wireless Service Tool

Tranquility LC3040 Wireless Service Tool-PRODUCT

លក្ខណៈបច្ចេកទេស

  • ឈ្មោះផលិតផល: Wireless Service Tool
  • ផ្នែក Number: LC3040
  • បានបង្កើត៖ ថ្ងៃទី ២១ ខែសីហា ឆ្នាំ ២០២២
  • ប្រភពថាមពល: Water source heat pump control or USB-C port
  • វ៉ាយហ្វាយ៖ 2.4Ghz antenna, up to 20 feet range
  • ធន់នឹងទឹក៖ មិនធន់នឹងទឹក។

អំពីឧបករណ៍សេវាកម្មឥតខ្សែរបស់អ្នក (WST)

  • Power is supplied by the water source heat pump control or by a USB-C port
  • អង់តែន Wi-Fi 2.4Ghz
  • The WST is NOT water resistant
  • អាចប្រាស្រ័យទាក់ទងជាមួយឧបករណ៍ដែលបើក Wi-Fi ដែលមានចម្ងាយរហូតដល់ 20 ហ្វីតពី WST

Tranquility LC3040 Wireless Service Tool-Fig (1)

ភ្ជាប់ឧបករណ៍សេវាឥតខ្សែទៅនឹងម៉ាស៊ីនបូមកំដៅប្រភពទឹក (មានខ្សែ)

ប្រសិនបើភ្ជាប់ទៅច្រកខាងក្រៅអង្គភាពដែលមានទីតាំងនៅបង្គោលជ្រុង (រូបភាពទី 2) សូមប្រើផ្នែក harness លេខ 11B0100N79 (រូបភាពទី 1) ។

  1. ដោតឧបករណ៍ភ្ជាប់ពណ៌បៃតងទៅក្នុង WST ។
  2. ដោតឧបករណ៍ភ្ជាប់ពណ៌សទៅក្នុងច្រកនៅលើបង្គោលជ្រុងនៃ WSHP ។Tranquility LC3040 Wireless Service Tool-Fig (2)
  3. The TX/RX LEDs on the WST illuminate indicating the WST is communicating with the unit control board.Tranquility LC3040 Wireless Service Tool-Fig (3)

ភ្ជាប់ឧបករណ៍សេវាឥតខ្សែទៅ CXM2/DXM2.5 (ខ្សែ)

If connecting to the port located on the CXM2 or DXM2.5 control, use harness part number 11B0100N80 (Figure 3).

  1. ផ្តាច់ថាមពលចេញពី WSHP ដកបន្ទះចូលខាងមុខអង្គភាព ហើយបើកផ្ទាំងបញ្ជា។
  2. ដោតឧបករណ៍ភ្ជាប់ពណ៌បៃតងទៅក្នុង WST ។
  3. ដោតឧបករណ៍ភ្ជាប់ពណ៌សទៅក្នុងច្រកទំនាក់ទំនងនៅលើ CXM2 ឬ DXM2.5 ក្នុងរូបភាពទី 4 ។
  4. ថាមពលនៅលើ WSHP ។
  5. The RX/TX LEDs on the WST illuminate, indicating the WST is communicating with the unit control board.

Tranquility LC3040 Wireless Service Tool-Fig (4)

Tranquility LC3040 Wireless Service Tool-Fig (5)

ភ្ជាប់ឧបករណ៍ដែលបើក WI-FI ទៅឧបករណ៍សេវាឥតខ្សែ

មុនពេលអ្នកចាប់ផ្តើម សូមប្រាកដថាភ្លើង RX/TX នៅលើ WST ភ្លឺ។ ជ្រើសរើសវិធីសាស្រ្តមួយក្នុងចំណោមវិធីខាងក្រោមដើម្បីចូលប្រើ WST web កម្មវិធី
ចំណាំ៖ The WST Wi-Fi passcode is 12345678.

  • Automatic method: Using the camera on your Wi-Fi-enabled device, scan the QR code on the back of the WST.
    វិធីសាស្រ្តដោយដៃ៖
    1. Open the Wi-Fi settings on your Wi-Fi-enabled device.
    2. Find WSTXXX in available networks, then select it.

រុករកទៅ WEB APP

  1. The green status LED illuminates and remains solid, indicating that the WST is communicating with your Wi-Fi-enabled device.
  2. Open the browser on your Wi-Fi-enabled device.
  3. ប្រសិនបើ WST Web App does not display in the browser, enter the following address: 191922..161688.4.4..11
    កម្មវិធីឧបករណ៍សេវាឥតខ្សែ ប្រតិបត្តិការ និងសៀវភៅណែនាំថែទាំ

សម្រាប់ព័ត៌មានលំអិតអំពីឧបករណ៍សេវាឥតខ្សែ សូមមើលសៀវភៅដៃកម្មវិធី WST ប្រតិបត្តិការ និងការថែទាំ (AOM) (ផ្នែក #97B0169N01)។

Tranquility LC3040 Wireless Service Tool-Fig (6)

សំណួរគេសួរញឹកញាប់

Is the Wireless Service Tool water-resistant?

No, the Wireless Service Tool is not water-resistant. Avoid exposure to water to prevent damage.

How far can the Wireless Service Tool communicate with a Wi-Fi enabled device?

The Wireless Service Tool can communicate with one Wi-Fi enabled device up to 20 feet away.

What is the Wi-Fi passcode for the Wireless Service Tool?

The Wi-Fi passcode for the Wireless Service Tool is 12345678.

ឯកសារ/ធនធាន

ឧបករណ៍សេវាកម្មឥតខ្សែ LC3040 ភាពស្ងប់ស្ងាត់ [pdf] ការណែនាំអ្នកប្រើប្រាស់
LC3040, LC3040 ឧបករណ៍សេវាឥតខ្សែ, ឧបករណ៍សេវាឥតខ្សែ, ឧបករណ៍សេវាកម្ម, ឧបករណ៍

ឯកសារយោង

ទុកមតិយោបល់

អាសយដ្ឋានអ៊ីមែលរបស់អ្នកនឹងមិនត្រូវបានផ្សព្វផ្សាយទេ។ វាលដែលត្រូវការត្រូវបានសម្គាល់ *