រូបសញ្ញា NUX

NUX Reissue Series Huminator Noise Gate

NUX-Reissue-Series-Huminator-Noise-Gate-PRODUCT

លក្ខណៈបច្ចេកទេស

  • Input impedance: 1 M Ohms
  • Output impedance k Ohms
  • Power: 9V battery or external AC adaptor delivering 9V DC regulated minimum 1 OOmA ( NUX-Reissue-Series-Huminator-Noise-Gate-FIG- (2))
  • Dimensions: 121 (L) x 77(!N) x 48(D) mm
  • ទំងន់: 253 ក្រាម។
  1. Do not place near heat sources, such as radiators, heat regiaters, or appliances which produce heat
  2. ការពារប្រឆាំងនឹងវត្ថុឬវត្ថុរាវដែលចូលទៅក្នុងឯករភជប់។
  3. បញ្ជូនសេវាកម្មទាំងអស់ទៅកាន់បុគ្គលិកសេវាកម្មដែលមានសមត្ថភាព។
  4. ការស្តាប់យូរនៅកម្រិតសំឡេងខ្ពស់អាចបណ្តាលឱ្យបាត់បង់ការស្តាប់និង / ឬខូចខាតដែលមិនអាចពន្យល់បាន។ ត្រូវប្រាកដថាអនុវត្ត“ ការស្តាប់ដោយសុវត្ថិភាព” ។

ធ្វើតាមការណែនាំទាំងអស់ ហើយធ្វើតាមការព្រមានទាំងអស់ រក្សាការណែនាំទាំងនេះ!

ការណែនាំអំពីការប្រើប្រាស់ផលិតផល

បើកថាមពល៖
To power on the Plexi Crunch Analog Delay, locate the power switch on the device and toggle it to the “On” position.

ការកំណត់ការគ្រប់គ្រង៖
Adjust the settings for Analog Chorus and Recto Distortion according to your preference using the control knobs provided.

Connecting to Equipment:
Connect your instrument or audio source to the input jack of the Analog Delay using a suitable cable. Connect the output jack to your ampឧបករណ៍ថតសំឡេងឬជីវិត។

ការប្រើប្រាស់ការកំណត់ជាមុន៖
If your device has preset options, select the desired preset by pressing the corresponding button or dial.

ការកែតម្រូវពេលវេលាពន្យាពេល៖
To adjust the delay time, use the dedicated knob on the Analog Delay. Turn it clockwise to increase delay time and counterclockwise to decrease it.

NUX-Reissue-Series-Huminator-Noise-Gate-FIG- (1)www.nuxaudio.com

  • ផលិតនៅប្រទេសចិន

Thank you for choosing the NUX Reissue Series NRN-1 Huminator Noise Gate Pedal. This pedal features dynamic LED indicators that visually track real-time noise suppression levels, paired with two selectable modes: MUTE Mode for instant silence during playing pauses and REDUCTION Mode for smooth signal decay that retains natural sustain. Its dedicated SEND/RETURN loop isolates noisy pedals to protect your core guitar tone while achieving transparent noise reduction, and with an upgraded 1 BV internal power circuit, the Huminator ensures enhanced headroom even when driving high­output pickups.

ជាងview 

  • បញ្ចប់សំលេងរំខានដែលមិនចង់បាន ធ្វើអោយសម្លេងល្អឥតខ្ចោះ។
  • The internal circuit converts the power supply to 1 BV, for greater headroom and wider usability.
  • របៀបពីរ៖ របៀបកាត់បន្ថយ និងរបៀបបិទសំឡេង។
  • សូចនាករ LED ថាមវន្ត។
  • រង្វិលជុំផលប៉ះពាល់ដែលភ្ជាប់មកជាមួយ។
  • 100% សៀគ្វីអាណាឡូក។

ចំណុចប្រទាក់ផលិតផល

NUX-Reissue-Series-Huminator-Noise-Gate-FIG- (3)

  1. ឌីស៊ីអ៊ិនជែក
    Use a regular 9V DC adaptor with Negative Tip to power this pedal. It’s highly recommended using the optional NUX ACD-006A adaptor. Using an incompatible adaptor may cause noise or malfunction.
  2. ប៊ូតុងកម្រិត
    Adjust at the signal level at the reduction will start.
  3. ប៊ូតុងបំបែក
    កែតម្រូវល្បឿននៃសញ្ញាទិន្នផលនឹងត្រូវបានកាត់បន្ថយនៅពេលដែលសញ្ញាបញ្ចូលធ្លាក់ចុះក្រោមកម្រិតចាប់ផ្ដើម។ បង្វែរប៊ូតុងនេះតាមទ្រនិចនាឡិកាសម្រាប់ការកាត់បន្ថយធម្មជាតិកាន់តែច្រើន។
  4. REDUCTION/MUTE Switch
    ជ្រើសរើសរបៀបនៃ Huminator ។
    • ទីតាំងចុះក្រោម៖ របៀបកាត់បន្ថយ ឥទ្ធិពលកាត់បន្ថយសំឡេងត្រូវបានបើក។
    • ទីតាំងឡើងលើ៖ របៀប MUTE សញ្ញាលទ្ធផលនឹងត្រូវបានបិទនៅពេលឆ្លងកាត់។
  5. អំពូល LED
    • Displays real-time noise reduction intensity. More indicators light up as the attenuation increases.
    • When the signal is near mute, the orange light turns on; when the signal is muted the red light turns on.
  6. សូចនាករបើក/បិទ
    ចង្អុលបង្ហាញការបើក / បិទនៃ Huminator ។
  7. បញ្ចូល Jack
    Connect the guitar to this jack. Plugging in this jack switch on the power whether the effect is engaged or disengaged. When not using this pedal, disconnect the cable from this jack to save battery life.
  8. ច្រកចេញ Jack
    ភ្ជាប់ amplifier ចូលទៅក្នុង Jack នេះ។
  9. ផ្ញើ Jack
    ភ្ជាប់ទៅការចាប់ផ្តើមនៃរង្វិលជុំផលប៉ះពាល់របស់អ្នក។
  10. ត្រឡប់ Jack
    ភ្ជាប់ទៅចុងបញ្ចប់នៃរង្វិលជុំផលប៉ះពាល់របស់អ្នក។
  11. ហ្វុតស្តូត
    ប៉ះ​ប៊ូតុង​បិទ​ជើង​ដើម្បី​បើក/បិទ​បែបផែន។ នៅក្នុងរបៀប MUTE វានឹងប្តូររវាង Reduction និង Mute។ នៅក្នុងរបៀបកាត់បន្ថយ វានឹងប្តូររវាងធម្មតា និងកាត់បន្ថយ។

របៀបភ្ជាប់

វិធីសាស្រ្តធម្មតា។
គ្រាន់តែភ្ជាប់ NRN-I ទៅក្នុងខ្សែសង្វាក់សញ្ញារបស់អ្នកជាឈ្នាន់ចុងក្រោយបន្ទាប់ពីឈ្នាន់គ្មានសម្លេង។

NUX-Reissue-Series-Huminator-Noise-Gate-FIG- (4)..

វិធីសាស្រ្តកម្រិតខ្ពស់
Connect the noisy pedals in the SEND/RETURN loop, the NRN-I will sense your guitar signal and allow the suppression circuit to activate only as your guitar signal dies out, making the sound more natural.

NUX-Reissue-Series-Huminator-Noise-Gate-FIG- (5)..

ចំណាំ
Do not connect delay or reverb effects between the Send and Return. Connect them between the NRN-I and the ampកាន់តែចាស់

ការដំឡើងថ្ម

NUX-Reissue-Series-Huminator-Noise-Gate-FIG- (6)

ថ្ម 9V ត្រូវបានរួមបញ្ចូលនៅក្នុងការវេចខ្ចប់ផលិតផល។ សូមប្តូរថ្មប្រសិនបើមានបញ្ហាខាងក្រោមកើតឡើង៖

  1. ភ្លើងសញ្ញារលត់ ឬមិនភ្លឺ។
  2. The effect sound becomes weak or heavily distorted.

Please connect the snap cord to the battery and insert the battery as shown in the drawing below.

ចំណាំ

  1. នៅពេលប្តូរថ្ម សូមប្រាកដថាប៉ូលបានត្រឹមត្រូវ។
  2. To extend battery life, when not using this pedal, disconnect the cable from the INPUT jack.
  3. If the product will be unused and stored for a long time, remove the battery to prevent leakage and potential damage.
  4. Only use a compatible power adapter for operation.(DC 9VNUX-Reissue-Series-Huminator-Noise-Gate-FIG- (2))

គ្រឿងបន្លាស់

  • ថ្ម 9V
  • សៀវភៅណែនាំរបស់ម្ចាស់
  • ស្ទីគ័រ NUX

ការព្រមាន! - សេចក្តីណែនាំអំពីសុវត្ថិភាពសំខាន់មុនពេលមានការទំនាក់ទំនងសូមអានសេចក្តីណែនាំ 

  • ព្រមាន៖ ដើម្បីកាត់បន្ថយហានិភ័យនៃអគ្គីភ័យ ឬការឆក់អគ្គិសនី សូមកុំដាក់ឧបករណ៍នេះទៅភ្លៀង ឬសំណើម។
  • ប្រយ័ត្ន៖ ដើម្បីកាត់បន្ថយហានិភ័យនៃការឆេះឬឆក់អគ្គិសនីសូមកុំដកវីសចេញ។ មិនមានផ្នែកដែលអាចប្រើបាននៅខាងក្នុង។ យោងសេវាកម្មដល់បុគ្គលិកសេវាកម្មដែលមានសមត្ថភាព។
  • NUX-Reissue-Series-Huminator-Noise-Gate-FIG- (7)The lightning symbol within a triangle means “electrical caution!” It indicates the of information about operating voltage និងហានិភ័យដែលអាចកើតមាននៃការឆក់អគ្គិសនី។
  •  NUX-Reissue-Series-Huminator-Noise-Gate-FIG- (8)ចំណុចឧទានក្នុងត្រីកោណមានន័យថា "ប្រយ័ត្ន!" សូមអានព័ត៌មាននៅជាប់នឹងសញ្ញាប្រុងប្រយ័ត្នទាំងអស់។

សំណួរគេសួរញឹកញាប់

សំណួរ៖ តើខ្ញុំផ្លាស់ប្តូរថ្មដោយរបៀបណាក្នុងការពន្យាពេល Plexi Crunch Analog?

A: To change the battery, locate the battery compartment on the device, remove the old battery, and insert a new one following the polarity markings.

សំណួរ៖ តើខ្ញុំអាចប្រើ Analog Chorus និង Recto Distortion ក្នុងពេលដំណាលគ្នាបានទេ?

A: Yes, you can use both effects simultaneously by adjusting their levels and settings accordingly on the device.

ឯកសារ/ធនធាន

NUX Reissue Series Huminator Noise Gate [pdf] សៀវភៅណែនាំរបស់ម្ចាស់
ស៊េរីការចេញផ្សាយឡើងវិញ, ស៊េរីថ្មី Huminator Noise Gate, Huminator Noise Gate, Noise Gate

ឯកសារយោង

ទុកមតិយោបល់

អាសយដ្ឋានអ៊ីមែលរបស់អ្នកនឹងមិនត្រូវបានផ្សព្វផ្សាយទេ។ វាលដែលត្រូវការត្រូវបានសម្គាល់ *