NIUBEST Small Floating Shelf

ការដំឡើងផលិតផល

• សម្ភារៈដែលត្រូវការ
  • បន្ទះឈើ
  • វីស
  • ដោតជញ្ជាំង

ជំហានដំឡើង

• ជំហានទី 1៖ ការសម្គាល់ជញ្ជាំង
  • Mark two points on the wall with a level ruler to fix the distance.
• ការពិពណ៌នាអំពីដ្យាក្រាម
  • The diagram illustrates a wall with two marks aligned horizontally, with a level ruler placed below them to ensure they are at the same height.
• ជំហានទី 2៖ ការរៀបចំជញ្ជាំង
  • Drill holes at the marked points of the wall and hammer the wall plugs in.
• ការពិពណ៌នាអំពីដ្យាក្រាម
  • The diagram shows three sequential images.
  • The first image depicts a drill making a hole at one of the marked points.
  • The second image shows a hammer being used to insert a wall plug into the drilled hole.
  • The third image shows the drill again, this time implying the process is repeated for the second mark, with a notice specifying a wall thickness of 6-7mm for the drill bit.
• ជំហានទី 3៖ ការដំឡើងធ្នើ
  • Align the board hole with the wall hole and twist into the screws to fix shelves.
• ការពិពណ៌នាអំពីដ្យាក្រាម
  • The diagram illustrates three steps to mount the shelf. The first image shows aligning the shelf’s hole with the wall hole. The second image depicts the shelf at an angle as it is partially mounted. The final image shows the shelf fully mounted against the wall with screws in place.

លក្ខណៈបច្ចេកទេស

សំណួរគេសួរញឹកញាប់

• តើឧបករណ៍អ្វីខ្លះដែលត្រូវការសម្រាប់ការដំឡើង?
  • A level ruler, drill, and hammer are required for the installation process.
• How do I ensure the shelf will be level?
  • Use a level ruler to mark the points on the wall to ensure they are at the same height.
• What size drill bit should be used?
  • The diagram suggests using a drill bit that accommodates a wall thickness of 6-7mm.
• Can I install the shelf without wall plugs?
  • Wall plugs are recommended for secure installation, especially in drywall or masonry.

ការដំឡើង

• ជំហានទី 1៖
  • Mark two points on the wall with a level ruler to fix the distance.
• ជំហានទី 2៖
  • Drill holes at the marked points of the wall and hammer the wall plugs in.
• ជំហានទី 3៖
  • Align the board hole with the wall hole and twist into the screws to fix shelves.

ឯកសារ/ធនធាន

NIUBEST Small Floating Shelf [pdf] ការណែនាំអំពីការដំឡើង Small Floating Shelf, Floating Shelf, Shelf

ឯកសារយោង

• សៀវភៅណែនាំអ្នកប្រើប្រាស់