Manuals+

Zalman S4 ATX Mid Tower Computer Case User's Manual

Version: 121919

Website: www.zalman.com

Precautions

Please read the following precautions carefully before installation and use. This manual is provided in multiple languages, but the English version contains the primary instructions and details.

  • Read this manual carefully before installing.
  • Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
  • Wear gloves to prevent accidents when installing the product.
  • Severe damage may occur when mounting the system, so do not apply excessive force.
  • Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
  • Be careful not to block the ventilation hole of the product when using the system.
  • Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
  • Do not wipe the surface of the product using chemicals (organic solvents such as alcohol or acetone).
  • Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
  • Store and use the product out of children's reach.
  • The company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
  • The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

Specifications

SpecificationDetails
ModelS4
Case Form FactorATX Mid-Tower
Dimensions380(D) x 206(W) x 458(H)mm
Weight3.6kg
Case MaterialsSteel, Plastic
Motherboard SupportATX / mATX / Mini-ITX
Maximum VGA Length315mm (Without fan, Radiator)
Maximum CPU Cooler Height160mm
Maximum PSU Length180mm
PCI Expansion Slots7
Drive Bays2 x 3.5" (1 x Combo) / 1 x 2.5" SSD
Fan SupportTop: 2 x 120mm
Front: 3 x 120mm
Rear: 1 x 120mm
Bottom: 2 x 120mm
Pre-Installed Fan(s)1 x 120mm (Rear)
1 x 120mm (Front)
Radiator SupportFront: 120mm / 240mm
Rear: 120mm
I/O Ports1 x Headphone, 1 x Mic, 1 x USB 2.0, 1 x USB 3.0, Power Button, Reset Button

Accessories Included

  • PCI Slot covers: 2
  • Cable ties: 5
  • Thumb Screws: 2
  • USB Rubber covers: 3
  • HDD Screws: 8
  • SSD / MB Screws: 22
  • PSU / VGA Screws: 8
  • Motherboard stand-offs: 6
  • Fan Screws: 2
  • HDD Slide Screws: 2
  • Media rubber covers: 2
  • Buzzer: 1

Front Panel I/O Ports

The front panel provides the following connectivity:

  • Power Button
  • Reset Button
  • HDD LED
  • Power LED
  • HD Audio Jack
  • USB 2.0 Port
  • USB 3.0 Port

Installation Guide

Step 1: Removing the Side Panels

Remove the side panels to access the interior of the case. This typically involves unscrewing or unlatching them.

  • 1a. Remove the [Acrylic Panel].
  • 1b. Remove the [Steel Panel].

Step 2: Removing the Front Panel

Detach the front panel from the case to allow access for fan or radiator installation.

Step 3: Mounting the Motherboard

Install the motherboard standoffs into the case chassis. Then, carefully place the motherboard onto the standoffs and secure it using [SSD/MB Screws]. The case supports ATX, mATX, and Mini-ITX motherboard sizes.

Step 4: Mounting the PSU

Position the Power Supply Unit (PSU) into its designated bay at the bottom rear of the case and secure it using [PSU/VGA Screws x 4].

Step 5: Mounting the PCI-E(VGA) Card

Install your Graphics Card (VGA) into the appropriate PCI-E slot on the motherboard and secure it to the case chassis using [PSU/VGA Screws x 2].

Step 6: Mounting the 3.5" and 2.5" SSD / HDD

Install 3.5" Hard Disk Drives (HDD) into the provided drive bays, securing them with [HDD Screws]. 2.5" Solid State Drives (SSD) can also be mounted using [SSD/MB Screws].

Step 7: Mounting the 2.5" SSD / HDD

Install an additional 2.5" SSD or HDD into its designated mounting location and secure it using [SSD/MB Screws x 4].

Step 8: Mounting the Radiator

Install a radiator in the front of the case (supports 120mm or 240mm radiators) or in the rear (supports 120mm radiators).

  • 8a. Mounting the front radiator (120mm/240mm).
  • 8b. Mounting the rear radiator (120mm).

Step 9: Pre-Installed Fan(s)

The case comes with pre-installed fans: one rear 120mm fan and one front 120mm fan.

Step 10: Mounting the Fans

Install additional fans in the designated locations: top, front, and bottom.

  • 10a. Mounting the top fans (up to 2 x 120mm).
  • 10b. Mounting the front fans (up to 3 x 120mm).
  • 10c. Mounting the bottom fans (up to 2 x 120mm).

Step 11: I/O Connectors

Connect the front panel I/O cables to the corresponding headers on the motherboard. These include:

  • [HDD LED cable]
  • [Reset cable]
  • [Power LED cable]
  • [Power cable]
  • [HD Audio cable]
  • [USB 3.0 cable]
  • [USB 2.0 cable]

Product Warranty Information

The following is a summary of the product warranty information, originally provided in Korean.

ItemDetails
Warranty Period1 year from the date of purchase (requires proof of purchase).
Free A/S (After-Sales Service)For product defects within the warranty period.
Paid A/SFor issues arising after the warranty period. Paid service also applies under specific conditions within the warranty period, including:
  • Failure to follow installation precautions in the manual.
  • Damage caused by user's intent, negligence, or carelessness.
  • Modification or failure due to user's arbitrary modification.
  • Tampering with or damage to the warranty sticker.
  • Failure caused by natural disasters.
  • Damage due to use in environments with high humidity, dust, or foreign substances (insects, etc.).
Parts Retention Period2 years from the product discontinuation date.
A/S Guidance
  • Operating Hours: Weekdays 10:00 - 16:00 (Closed on public holidays, Saturdays, and Sundays).
  • How to Apply: Visit www.zalmansvc.com, register, and apply for service. Visit the service center with the product or send it via courier (include name, contact info, and symptoms).
  • Service Center Location: Check the exact location and address on the website.
Product Shipping Costs
  • Initial Defect: The company covers round-trip shipping costs.
  • Free A/S: Customer is responsible for one-way shipping costs (prepaid) within the free period.
  • Paid A/S and Post-Warranty: Customer is responsible for all round-trip shipping costs.
Manufacturing Date Check MethodExample: 2070118A01A00001. The first two digits indicate the year (e.g., 18 for 2018). The third digit indicates the month (1-9, A for Oct, B for Nov, C for Dec).
Models: S4, ATX Mid Tower Computer Case, S4 ATX Mid Tower Computer Case, Mid Tower Computer Case, Tower Computer Case, Computer Case, Case

File Info : application/pdf, 2 Pages, 6.63MB

korpus-s4-miditower-bez-bp-chernyy-s4-manual

References

Adobe PDF Library 15.0 Adobe InDesign 14.0 (Windows)

Related Documents

Preview Zalman R2 ATX Mid Tower Case User's Manual
Comprehensive user manual for the Zalman R2 ATX Mid Tower Case, detailing precautions, specifications, accessories, and step-by-step installation instructions.
Preview ZALMAN X3 ATX Mid Tower Computer Case User's Manual
Comprehensive user's manual for the ZALMAN X3 ATX Mid Tower Computer Case, covering installation precautions, detailed specifications, component compatibility, and assembly instructions for building a PC.
Preview Zalman N5 MF ATX Mid-Tower Computer Case User Manual
Comprehensive user manual for the Zalman N5 MF ATX Mid-Tower Computer Case, detailing installation steps, precautions, technical specifications, accessories, I/O ports, and warranty information.
Preview Zalman X3 ATX Mid-Tower Computer Case User Manual
Comprehensive user manual for the Zalman X3 ATX Mid-Tower computer case. Details installation steps, technical specifications, accessories, I/O ports, RGB LED controller, fan specs, and warranty information for PC builders.
Preview Zalman Z1 NEO ATX Mid Tower Computer Case Installation Guide
Comprehensive installation guide for the Zalman Z1 NEO ATX Mid Tower Computer Case. Covers product overview, safety precautions, component identification, step-by-step installation of motherboard, drives, and cables, front I/O port details, and warranty information. Includes detailed textual descriptions of diagrams.
Preview Zalman I3 Neo TG ATX PC Case User Manual
Comprehensive user manual for the Zalman I3 Neo TG ATX PC Case. This guide details specifications, features, and installation instructions for the white tempered glass chassis equipped with RGB lighting, multiple drive bays, and front USB 3.0 connectivity.
Preview ZALMAN i3 NEO ATX Mid Tower Computer Case User's Manual
User's manual for the ZALMAN i3 NEO ATX Mid Tower Computer Case, providing installation instructions, specifications, and precautions.
Preview Zalman Z9 Iceberg MS ATX Mid Tower Computer Case User Manual
User manual for the Zalman Z9 Iceberg MS ATX Mid Tower Computer Case, providing installation instructions, safety precautions, specifications, and component details.