CCD-0009348 សោគ្មានសោ Xtend
“
លក្ខណៈពិសេស៖
- Product Name: Keyless LatchXtendTM
- លេខម៉ូដែល: CCD-0009348
- Release Date: Rev 02. 7. 2025
ព័ត៌មានផលិតផល៖
The Keyless LatchXtendTM is a smart door handle system designed
for RVs, offering keyless entry and Bluetooth operation. It comes
with a built-in battery that needs to be activated by removing a
pull tab located in the battery compartment.
សេចក្តីណែនាំអំពីការប្រើប្រាស់ផលិតផល៖
Activating the Battery:
ដើម្បីធ្វើឱ្យថ្មសកម្ម៖
- Locate the pull tab on the back side of the battery
បន្ទប់។ - Pull the tab completely to close the battery circuit.
Programming/Reprogramming an Entry Code:
To set a new entry code:
- Press and hold the 9/0 key until two beeps sound.
- Enter the current entry code within 10 seconds.
- Enter the new digit entry code within 10 seconds. Three beeps
will sound, indicating successful programming.
Controlling via Smart Device App:
To control the LatchXtendTM using a smart device app:
- Scan the QR code provided to find and download the appropriate
app for your RV. - Download the app and create a new account or log in if you
មានមួយរួចហើយ។ - Proceed to the Pairing section in the manual for further
ការណែនាំ។
សំណួរគេសួរញឹកញាប់៖
Q: Can the entry code be set or changed using a smart device
កម្មវិធី?
A: No, the entry code can only be set using the keypad on the
device itself as described in the manual.
Q: What should I do if my door swings open
unintentionally?
A: Avoid using excessive force on the handle and ensure that
environmental elements do not catch the door. If this happens,
inspect for any damage and operate the door with care to prevent
របួសឬការខូចខាត។
“`
Keyless LatchXtendTM
REV: 02. 7. 2025 CCD-0009348
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
សេចក្តីផ្តើម
The Lippert LatchXtendTM Keyless RV Door Lock with Bluetooth® extends the paddle latch by 14 inches, providing significant leverage for easier door operation without an entry step in place. This guide includes instructions for setting an entry code and controlling the LatchXtendTM with a smart device app..
NOTE: The battery will ship inside the battery compartment. To activate the battery, a pull tab will be accessible on the back side of the battery compartment (Fig. 1B) that needs to be pulled completely from this location. This will close the battery circuit allowing for electronic and bluetooth operation of the LatchXtendTM.
EXCESSIVE FORCE IS NOT NECESSARY TO OPERATE THE LATCHXTENDTM. DO NOT PULL WITH ENTIRE BODY WEIGHT OR PULL HANDLE FOR LONG PERIODS AS THIS COULD
DAMAGE THE KEYLESS LATCHXTENDTM RV DOOR HANDLE OR CAUSE THE LATCH AND THE DOOR TO SWING OPEN UNINTENTIONALLY CAUSING DAMAGE OR INJURY.
DOORS MOVING OUTWARD ON HINGE CAN SWING OPEN WHEN CAUGHT BY ENVIRONMENTAL ELEMENTS OR WHEN EXCESSIVE FORCE IS USED. DAMAGE TO
DOOR, UNIT EXTERIOR, OR PERSONAL INJURY CAN OCCUR.
For additional information about this product, please visit: https://support.lci1.com/keyless-latchxtend
REV: 02. 7. 2025
ទំព័រ 2
ស៊ីស៊ី-០០០២៥២០
Programming/Reprogramming an Entry Code
NOTE: The default entry code is located on a sticker on the interior door handle (Fig. 1A).
1. To set a new entry code, press and hold the 9/0 key (Fig. 2A) until two beeps sound. 2. Enter the current entry code within 10 seconds. Two beeps will sound. 3. Enter the new digit entry code on the keypad within 10 seconds. Three beeps will sound. The new entry code is now programmed.
NOTE: This is the only way to set the entry code. It cannot be set or changed by a smart device app.
A
A
B
Fig.1
REV: 02. 7. 2025
ទំព័រ 3
Fig.2
ស៊ីស៊ី-០០០២៥២០
Controlling the LatchXtendTM from a Smart Device App
1. To find the right app for your RV , scan the QR code below.
Scan this code to open a webpage that guides you to the right app for your LatchXtendTM device. If you already use an app to operate your RV’s control system, you might be able to add LatchXtendTM to it. Scan the code to check for compatibility
2. Download the app to the smart device and follow the prompts to set up a new account or log in to an existing account.
3. Proceed to the Pairing section of this manual (Pg. 5).
REV: 02. 7. 2025
ទំព័រ 4
ស៊ីស៊ី-០០០២៥២០
App Previously Downloaded
If you already use an RV control App, confirm that the LatchXtendTM is compatible.
1. Open the App and look for a “+” icon at the upper right of the screen. 2. Tap the “+” icon to open the Add & Explore page. 3. Look for the LatchXtendTM accessory from the list of accessories and devices. 4. If you see the LatchXtendTM, proceed to the Pairing section of this guide.
ផ្គូផ្គងជាមួយកម្មវិធី
5. Open the app and tap the “+” icon at the top right of the screen. 6. Select the LatchXtendTM accessory from the list of accessories and devices. 7. The app will display a screen indicating that the app is ready to pair with the LatchXtendTM. 8. The Touch Indicator Light (TIL) will blink BLUE with two audible beeps, then continue to blink BLUE for 15 seconds until pairing mode expires. When pairing is successful, the app will indicate a successful pairing session and the TIL will communicate with 2 GREEN blinks and audible beeps. 9. The app will return to the HOME screen. 10. Scroll down to find the LatchXtendTM device section. 11. Open the section for controls and features.
REV: 02. 7. 2025
ទំព័រ 5
ស៊ីស៊ី-០០០២៥២០
Whenever, wherever, we make your experience better.
ព័ត៌មានដោយដៃអាចត្រូវបានចែកចាយជាឯកសារពេញលេញតែប៉ុណ្ណោះ លុះត្រាតែ Lippert ផ្តល់ការយល់ព្រមច្បាស់លាស់ក្នុងការចែកចាយផ្នែកនីមួយៗ។ ព័ត៌មានដោយដៃទាំងអស់អាចផ្លាស់ប្តូរដោយគ្មានការជូនដំណឹងជាមុន។ ការបោះពុម្ពដែលបានកែប្រែនឹងអាចទាញយកដោយឥតគិតថ្លៃនៅ lippert.com ។ ព័ត៌មានដោយដៃត្រូវបានចាត់ទុកថាជាការពិត រហូតទាល់តែត្រូវបានលុបចោលដោយកំណែដែលបានកែប្រែ។ សូមកែច្នៃសម្ភារៈដែលលែងប្រើទាំងអស់ ហើយទាក់ទង Lippert ដោយមានកង្វល់ ឬសំណួរផ្សេងៗ។
REV: 02. 7. 2025 CCD-0009348
LippertNOW LippertNOW www.lci1.com
ឯកសារ/ធនធាន
 |
LiPPERT CCD-0009348 Keyless Latch Xtend [pdf] ការណែនាំអ្នកប្រើប្រាស់ CCD-0009348 Keyless Latch Xtend, CCD-0009348, Keyless Latch Xtend, Latch Xtend, Xtend |