Kestrel LiNK App
លក្ខណៈបច្ចេកទេស
- Product Name: Kestrel LiNK App
- ភាពឆបគ្នា៖ ឧបករណ៍ iOS
- Functionality: Remote monitoring and data transmission
Set up the Kestrel LiNK App
- ទាញយក និងដំឡើងកម្មវិធីនៅលើឧបករណ៍របស់អ្នក។
- Ensure your device is charged and has an active internet connection (Wi-Fi may be preferred for downloading the app).
- បើក App Store
. - ស្វែងរក ‘Kestrel LiNK’ and install the app listing with the blue & white icon.
- Ensure that your Kestrel is powered on and Bluetooth is active. Open the app and navigate to the Devices tab. Locate your new device in the list and tap “Connect.”
- You may have to accept prompts to allow access to Bluetooth.
- If your device is not listed, refresh to find available Bluetooth pairing devices.
ចំណាំ៖ It might take a couple of attempts to successfully connect to your device.
Set up the Kestrel LiNK App (cont
Once you connect your device, you might receive a prompt stating “Firmware update available.” Tap the “Settings” button on your device to check for new firmware. Tap “Check for Firmware Updates”. Tap “Update” if a new firmware update is available.
Enable continuous monitoring
Configure your dashboard display
Send data to AmbientWeather.net for remote monitoring.
Connect to AWN
ចំណាំ៖ For continuous data transmission to Ambient Weather Network, make sure the Kestrel LiNK App is open, not minimized, and showing the dashboard screen on the remote device.
- Using another internet-connected device such as a laptop or mobile phone, go to AmbientWeather.net.
- Tap the “Login” button.
- Log in to an existing account or create a new account.
Connect to AWN (cont)
- Once you create or log in to your AWN account, select “Devices”
- On the top left and tap the + icon to add a new device.
Enter the MAC Address displayed on the Kestrel LiNK app for the device you would like to use for remote viewing and tap “Next”.
Connect to AWN (cont)
Enter a name for your Kestrel device.
- Enter your device location.
- The location will be displayed on the AWN map.
- ជ្រើសរើសតំបន់ពេលវេលារបស់អ្នក។
- Check if you would like to make your device data viewable on the public map.
- Select ‘Create’ to finish setting up.
Connect to AWN (cont)
- Go to your dashboard to select which Kestrel device
- You would like to view from the dropdown.
- Set up complete!
ចំណាំ: It may take up to five minutes for data to start reporting.
Set up the Kestrel LiNK App
Ensure a stable connection (Wi-Fi recommended) and follow on-screen instructions for installation.
ឯកសារ/ធនធាន
 |
Kestrel LiNK App [pdf] ការណែនាំអ្នកប្រើប្រាស់ LiNK App, LiNK, App |