អេក្រង់ XAP Dash NTX Marshalling
“
ព័ត៌មានអំពីផលិតផល
លក្ខណៈបច្ចេកទេស
- Product: IMSA VP Racing Sportscar Challenge GSX Data Download
នីតិវិធី - Manufacturer: IMSA
- កាលបរិច្ឆេទមានប្រសិទ្ធភាព៖ ថ្ងៃទី ១ ខែសីហាឆ្នាំ ២០១៧
- Location: One Daytona Blvd. Daytona Beach, FL 32114
- Contact: P: +1 ៨៦៦-៤៤៧-២១៩៤
ការណែនាំអំពីការប្រើប្រាស់ផលិតផល
XAP Data Download Procedure:
- Step 1 must be completed before connecting a PC to the XAP
សញ្ញា។ - Post session, power cycle the car to return to the mechanic’s
ទំព័រ។ - Connect a PC to the dash using a USB A to B cable. Once
connected, the Dash will display the designated screen. - XAP DRIVE (D:) should now be available in the File
អ្នករុករក។ - Next, CUT the Aquis Folder and PASTE it to the Series
Scrutineering Data Stick. - Unplug the USB cable from the car, and the dash will reboot and
return to the mechanic’s page.
សំណួរដែលសួរញឹកញាប់ (FAQ)
Q: What electronics are required for the data download
នីតិវិធី?
A: Refer to VPRC Technical Memo #25-01c1 for details on the
required electronics.
សំណួរ៖ អ្វី file is required from the Team Logger according to GSX
Technical Regulation 8.2.2.c.?
ក៖ ក file from the Team Logger is also required as per GSX
Technical Regulation 8.2.2.c.
“`
MEMO បច្ចេកទេស
One Daytona Blvd. ឆ្នេរ Daytona, FL 32114 P: +1 ៨៦៦-៤៤៧-២១៩៤
VPRC TECHNICAL MEMO #25-03
ទៅ៖
IMSA VP Racing Sportscar Challenge GSX Participants
ពី៖ IMSA Competition
កាលបរិច្ឆេទ៖ ថ្ងៃទី ១៩ ខែ សីហា ឆ្នាំ ២០២៣
Re:
Updated GSX Data Download Procedure
Applies to GSX: IMSA is implementing updates to the data download procedures for the IMSA VP Racing Sportscar Challenge (VPRC) effective for the Event at Virginia International Raceway onward. This memo will serve as a guide to the new procedures. See VPRC Technical Memo #25-01c1 for details on the electronics required for this procedure. The 2025 Technical Regulations by Class will serve as the official requirements.
In accordance with GSX Technical Regulation 8.2.2.c. a file from the Team Logger is also required.
XAP Data Download Procedure:
Step 1 must be completed before connecting a PC to the XAP Dash.
1. Post session, power cycle the car to return to the mechanic’s page:
2. Connect a PC to the dash using a USB A to B cable. Once connected, the Dash will display this screen:
ទំព័រ | ១
MEMO បច្ចេកទេស
One Daytona Blvd. ឆ្នេរ Daytona, FL 32114 P: +1 ៨៦៦-៤៤៧-២១៩៤
3. “XAP DRIVE (D:)” should now be available in the File Explorer. 4. Next, CUT the “Aquis” Folder and PASTE it to the Series Scrutineering Data Stick
5. Unplug the USB cable from the car and the dash will reboot and return to the mechanic’s page.
ទំព័រ | ១
ឯកសារ/ធនធាន
 |
IMSA XAP Dash NTX Marshalling Display [pdf] សៀវភៅណែនាំ XAP Dash NTX Marshalling Display, XAP, Dash NTX Marshalling Display, NTX Marshalling Display, Marshalling Display |