ភ្ជាប់កម្មវិធីតុល្យភាព
“
ព័ត៌មានអំពីផលិតផល
លក្ខណៈពិសេស៖
- Designed for Variable Air Volume (VAV) balancing
- Integrated Bluetooth technology for easy access
- Utilizes Bluetooth Low Energy (BLE) for connection
- Compatible with BACnetTM network
- Range: 20-30 meters for BLE connection
សេចក្តីណែនាំអំពីការប្រើប្រាស់ផលិតផល៖
1. Connect to VAV Controllers:
To access the functions of VAV controllers, follow these
ជំហាន៖
- The configured device name will be displayed in the list of BLE
ឧបករណ៍។ - The list is organized based on signal strength, with the
strongest signals at the top.
ចំណាំ៖ Ensure the Mobile Device and the
controller are within the BLE range (20-30 meters). Only the first
21 characters of the Device name will be displayed due to BLE
advertisement character limitation.
2. Single Controller Balancing:
To balance a single controller:
- Select ‘Balance This Controller’ option.
- If the controller is already balanced, you can choose to clear
before rebalancing. - Non-Alerton controllers support 2 calibration types – Flow
Calibration factor (default 1) & Manufacturer K factor.
3. Multiple Controller Balancing:
To balance multiple controllers:
- Filter properties to display unbalanced, balanced, zeroed
controllers, or those that are not zeroed. - Select ‘Multiple Controllers’ and perform operations on
selected controllers.
4. View ឧបករណ៍បញ្ជា៖
ទៅ view or update controller properties and settings:
- ជ្រើសរើស'View Controller’ option.
- View or update the controller by following operations.
5. Move Damper Operation:
Adjust the position of VAV dampers for airflow
redistribution:
- ‘Move Damper by Airflow’: Command/set damper to a specific
target airflow. - ‘Move Damper by Position’: Set the damper to a specific
position based on a percentage.
6. Zero Calibration:
Ensure accuracy and efficiency of VAV controller operations by
managing calibrations and settings effectively through Zero
Calibration option.
សំណួរដែលសួរញឹកញាប់ (FAQ):
Q: What is the range for Bluetooth Low Energy (BLE)
ការតភ្ជាប់?
A: The BLE connection range is 20-30 meters. Ensure the mobile
device and controller are within this range for proper
ការតភ្ជាប់។
សំណួរ៖ តើខ្ញុំអាចធ្វើដូចម្តេច view or update controller properties?
A: Select ‘View Controller’ option in the app to access and
modify controller properties and settings accordingly.
“`
CONNECT MOBILE APP
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
តារាងមាតិកា
Connect Mobile App……………………………………………………………………………………………………………………………………………………………….3 System Overview……………………………………………………………………………………………………………………………………………………………………..4 Connect To VAV Controllers…………………………………………………………………………………………………………………………………………………5 Single Controller Balancing…………………………………………………………………………………………………………………………………………………6 Multiple Controller Balancing…………………………………………………………………………………………………………………………………………….7 View Controller …………………………………………………………………………………………………………………………………………………………………………8 Move Damper Operation………………………………………………………………………………………………………………………………………………………9 Zero Calibration …………………………………………………………………………………………………………………………………………………………………….10 Clear Zero And Balance, Resume To Normal………………………………………………………………………………………………………………11 Generate Report……………………………………………………………………………………………………………………………………………………………………12 View Report……………………………………………………………………………………………………………………………………………………………………………..13 Alerton Standard Applications – Point Mapping ……………………………………………………………………………………………………….14
Connect Mobile App | www.honeywell.com 2
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
ភ្ជាប់កម្មវិធីទូរស័ព្ទ
The application is designed specifically for Variable Air Volume (VAV) balancing, offering users streamlined access to the IP VAV controller through integrated Bluetooth technology. By utilizing Bluetooth Low Energy (BLE), the app enables a straightforward connection to the controller and facilitates the discovery of other controllers within the same BACnetTM network, as the Bluetooth-enabled controller serves as a router to this network.
Air Balancing Connect Mobile App
· Users can connect to the controller via Bluetooth. · Single and Multi Controller balancing capabilities. · Precise calibration of zero velocity cutoff. · Manual calibration for accurate VAV operation. · Adjust damper settings for position and airflow. · Resume normal operation and clear adjustments. · Generate shareable reports for improved efficiency and documentation in VAV
ការគ្រប់គ្រងប្រព័ន្ធ។
Connect Mobile App | www.honeywell.com 3
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
ប្រព័ន្ធបញ្ចប់view
1 Configure the Controller
2 Connect via BLE
3 Balance the Controller
4 បង្កើតរបាយការណ៍
Connect Mobile App | www.honeywell.com 4
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
Connect To VAV Controllers
Connect the mobile device to VAV controllers to access their functions. 1. The configured device name will be displayed in the list of BLE devices. 2. The list is organized based on signal strength, with the strongest signals at the
កំពូល។
Note: Ensure the Mobile Device and the controller are within the BLE range (20-30 meters). Due to BLE advertisement character limitation, only the first 21 characters of Device name will be displayed in the list.
Connect Mobile App | www.honeywell.com 5
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
Single Controller Balancing
This Method refers to the process of calibrating and adjusting the airflow for one specific VAV controller. This method is typically used when a precise adjustment is needed for individual units. · Select Controller · Connect to Controller · Enter Parameters · Start Balancing · Review លទ្ធផល
Select Balance This Controller option.
Note: If controller is already balanced, you can choose to clear before rebalancing. Non-Alerton controllers support 2 calibration types – Flow Calibration factor (default 1) & Manufacturer K factor.
Connect Mobile App | www.honeywell.com 6
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
Multiple Controller Balancing
This Method allows users to adjust and calibrate several VAV controllers simultaneously. This feature is efficient for operations requiring mass updates or inspections. Maximum 5 devices are supported for multi-controller balancing. · Select Controllers · Input Common Parameters · Initiate the Balancing Process · Monitoring Progress · Review Results for Each Controller
Filter Properties: : Displays only the
unbalanced controllers. : Displays only the
balanced controllers. : Displays only the
zeroed controllers. : Displays only the
controllers which are not zeroed.
Select Multiple Controllers
Select Go To Tasks and perform the operations on the selected controllers. For more details refer to Clear Zero And Balance, Resume To Normal.
Connect Mobile App | www.honeywell.com 7
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
View ឧបករណ៍បញ្ជា
Choose `View Controller’ option to view or update controller properties and settings.
ជ្រើសរើស View Controller option and view or update the controller by following operations:
· Balance: Fine-tune airflow for effective system performance.
· Move: Manually reposition dampers for optimization.
· Properties: View Controller Properties.
· Fan: Control Fan settings during balancing.
· Heat: Control Heat settings during balancing.
Connect Mobile App | www.honeywell.com 8
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
Move Damper ប្រតិបត្តិការ
Move Damper Operation is a feature that allows users to adjust the position of VAV (Variable Air Volume) dampers. This helps in redistributing airflow within a duct system, which is crucial for optimizing HVAC system performance and ensuring effective climate control.
Move Damper by Airflow: This Allows users to command/set damper to a specific target airflow. Move Damper by Position: This allows the user to set the damper to a specific position based on a percentage.
Connect Mobile App | www.honeywell.com 9
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
ការក្រិតតាមខ្នាតសូន្យ
Zero Calibration option is critical for maintaining the accuracy and efficiency of VAV controller operations, allowing users to manage calibrations and settings effectively.
ZERO to physically close the damper and adjust the Zero velocity cut off %.
MOVE FOR BALANCING screen directly.
Connect Mobile App | www.honeywell.com 10
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
Clear Zero And Balance, Resume To Normal
Perform resume to normal, clear zero or balancing options for one or more controllers.
Resume to Normal: It will clear any overrides performed during balancing process.
Clear Zero and Balance: It clears both zero cut off velocity and balancing – calibration factor.
Clear Zero: It clears the zero cut off velocity.
Connect Mobile App | www.honeywell.com 11
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
បង្កើតរបាយការណ៍។
Generate a report by selecting the controllers you want to include. A .csv file will be generated and stored locally in your app.
Give a Name and Description to your report.
Note: Controller connectivity is needed only to generate the report. However, once generated, the reports can be accessed from the Hamburger menu at any time, even without needing to connect to the controller.
Connect Mobile App | www.honeywell.com 12
មគ្គុទ្ទេសក៍ចាប់ផ្តើមរហ័ស
View រាយការណ៍
The report will include Balancing status at controller levels, allowing you to Share it with your team.
Connect Mobile App | www.honeywell.com 13
Alerton Standard Applications – Point Mapping
Refer to the BACnet points used in Alerton Standard applications during the balancing process.
Point Mapping
ទ្រព្យសម្បត្តិ
K -Factor Drive Time Max Setpoint Min Setpoint Airflow Fan Speed Command Fan Command Reheat/Fan Setpoint Lock Damper Box Size Heating Valve Command Velocity Cutoff (%) Damper Position Force To Max Setpoint Force To Min Setpoint Force Damper To Open Force Damper To Close Force To Reheat Setpoint
AV/BV POINT
AV 252 AV 64 AV 67 AV 68 AI 10 AV 174 BV 193 AV 66 BV 16 AV 250 AV 172 AV 251 AV 9 BV 11 BV 9 BV 13 BV 12 BV 10
Note: Please refer to the Controller IOG documentation for guidance on using custom objects for balancing.
តាមរយៈការប្រើប្រាស់អក្សរសិល្ប៍ហាន់ណលវែលនេះអ្នកយល់ព្រមថាហិនវែលវែលនឹងមិនទទួលខុសត្រូវចំពោះការខូចខាតណាមួយដែលកើតឡើងពីការប្រើប្រាស់ឬការកែប្រែរបស់អ្នកចំពោះអក្សរសិល្ប៍។ អ្នកនឹងការពារនិងសងជំងឺចិត្តដល់ហាន់វែលសម្ព័ន្ធនិងក្រុមហ៊ុនបុត្រសម្ព័ន្ធពីនិងប្រឆាំងនឹងការទទួលខុសត្រូវថ្លៃដើមឬការខូចខាតណាមួយរួមទាំងថ្លៃមេធាវីដែលកើតចេញពីឬលទ្ធផលនៃការកែប្រែណាមួយលើអក្សរសិល្ប៍ដោយអ្នក។
ស្វ័យប្រវត្តិកម្មអគារ Honeywell
715 Peachtree Street, N.E., Atlanta, Georgia, 30308, United States. https://hwll.co/BuildingControlSolutions
@US បានចុះបញ្ជីពាណិជ្ជសញ្ញា © 2025 Honeywell International Inc. 31-00839-01 | ប.០៦-២៤
ឯកសារ/ធនធាន
 |
Honeywell Connect Balancing App [pdf] ការណែនាំអ្នកប្រើប្រាស់ hon-ba-bms-honeywell-balancing-app-quickstart-guide.pdf, 31-00839, Connect Balancing App, Balancing App, App |