មាតិកា លាក់
1 GSSI Geophysical Survey Systems NX25-NX15 FlexNX-LT កម្មវិធី
2 លក្ខណៈ​ពិសេស៖
3 ការណែនាំជាជំហាន ៗ ដើម្បីធ្វើបច្ចុប្បន្នភាពកម្មវិធី FlexNX/LT
4 សេចក្តីណែនាំ
5 សំណួរដែលសួរញឹកញាប់
6 ឯកសារ/ធនធាន
6.1 ឯកសារយោង

GSSI-LOGO

GSSI Geophysical Survey Systems NX25-NX15 FlexNX-LT កម្មវិធី

GSSI-Geophysical-Survey-Systems-NX25-NX15-FlexNX-LT-Software-PRODUCT

លក្ខណៈ​ពិសេស៖

  • ម៉ូដែលផលិតផល៖ FlexNX/LT
  • កំណែកម្មវិធី៖ ១០៣០.៣៨
  • ប្រភេទកញ្ចប់៖ ហ្ស៊ីប

Flex NX/LT Update Procedure – Version 2.304

ការណែនាំជាជំហាន ៗ ដើម្បីធ្វើបច្ចុប្បន្នភាពកម្មវិធី FlexNX/LT

Prior to installing software version 2.304 please confirm that your FlexNX, Flex LT, NX25 and/or NX15 are all running version 2.178 or later. If an earlier version is currently installed, do not attempt to update. Instead, contact softwaretechsupport@geophysical.com សម្រាប់ជំនួយ។

សេចក្តីណែនាំ

  1. Download latest software .ZIP package here:  https://www.geophysical.com/support/flexnxsupport
    NOTE: There two download options: one for Nexus (Flex NX, Flex LT, NX25, and NX15) and one for Nexus Elements (NX25 and NX15 ONLY). Be sure to select the “Full Nexus Release” package.
  2. Select a USB drive that is formatted as FAT32 – You can check the format of the drive by right clicking the drive in Windows and selecting “Properties”:
    GSSI-Geophysical-Survey-Systems-NX25-NX15-FlexNX-LT-Software (2)
  3. Copy the entire ZIP package to the USB drive. Do not extract the .ZIP package.
  4. After copying the package over to the USB drive the root of the drive should look like this (only one folder): GSSI-Geophysical-Survey-Systems-NX25-NX15-FlexNX-LT-Software (3)
  5. Remove the USB drive from the computer.
  6. Power on Flex NX or Flex LT.
  7. Once at the Main Dashboard, tap the screen where it lists the current software version: GSSI-Geophysical-Survey-Systems-NX25-NX15-FlexNX-LT-Software (4)
  8. A screen will populate depicting a USB drive. Insert the USB drive.
  9. Install package transfer and software Installation will commence: GSSI-Geophysical-Survey-Systems-NX25-NX15-FlexNX-LT-Software (5)
  10.  After the installation is complete the FlexNX/LT cart will reboot and populate a configuring page: GSSI-Geophysical-Survey-Systems-NX25-NX15-FlexNX-LT-Software (1)
  11. Once configured the FlexNX/LT will reboot once again and return to the dashboard. Confirm the software version (2.304) is reporting correctly on the dashboard.
  12. If NX25 or NX15 need to be updated, first perform a manual power cycle for FlexNX or Flex LT.
  13. Update satellite antennas one at a time. Start by powering on Flex NX or Flex LT, then power on NX25 of NX15. Once connected, follow the prompts on Flex NX or Flex LT to update the satellite antenna. Do not power off the antenna when the LED is blinking magenta.
  14. Once the update is completed, NX25 or NX15 will reboot into the Nexus Elements Interface and display a slow flashing yellow LED. Simply pair as normal to Flex NX. For Flex LT, pair the satellite antenna by tapping the connector side of the Flex Tether Module to the satellite antenna’s NFC sticker.

សូមទាក់ទងមកយើងខ្ញុំតាមរយៈ softwaretechsupport@geophysical.com if you have any questions require assistance.

សំណួរដែលសួរញឹកញាប់

What should I do if I need assistance with updating NX25 or NX15?

If you require assistance with updating NX25 or NX15, please first perform a manual power cycle for FlexNX or FlexLT. Then, update the satellite antennas one at a time as described in the user manual.

ឯកសារ/ធនធាន

GSSI Geophysical Survey Systems NX25-NX15 FlexNX-LT កម្មវិធី [pdf] ការណែនាំអ្នកប្រើប្រាស់
កម្មវិធី NX25-NX15 FlexNX-LT, NX25-NX15, កម្មវិធី FlexNX-LT, កម្មវិធី

ឯកសារយោង

ទុកមតិយោបល់

អាសយដ្ឋានអ៊ីមែលរបស់អ្នកនឹងមិនត្រូវបានផ្សព្វផ្សាយទេ។ វាលដែលត្រូវការត្រូវបានសម្គាល់ *