ការណែនាំអំពីការដំឡើងឧបករណ៍ចាប់សញ្ញាសីតុណ្ហភាព Danfoss AK-HS 1000

ការណែនាំអំពីការដំឡើងឧបករណ៍ចាប់សញ្ញាសីតុណ្ហភាព Danfoss AK-HS 1000

មាតិកា លាក់

1 ការម៉ោន

2 ការក្រិតតាមខ្នាត

3 CERTIFICATE OF PERFORMANCE

4 ការពិពណ៌នាអំពីឧបករណ៍

ការម៉ោន

	For controllers with galvanic separated power supply	For controllers with non-galvanic separated power supply

ការក្រិតតាមខ្នាត

In order to achieve an accuracy better than ±1 K of the temperature controlled, the accuracy of the sensor and the connecting cables must be better than ±0.6 K.

The cable resistance expressed in Kelvin can be calculated by using the formula below:

R = Cable resistance expressed in Kelvin
ρ = Specific resistance of the material [Ω/m/mm²] អិល = The length of the wire [in m there and back] q = Cross-section of the wire [mm2]

Exampលេ៖
ρ = 0.018
អិល = 10 m x 2 = 20 m
q = 0.75 ម 2

Pt 1000 ohm / 0 °C

°C	អូម	°C	អូម
0	1000.0	0	1000.0
1	1003.9	-1	996.1
2	1007.8	-2	992.2
3	1011.7	-3	988.3
4	1015.6	-4	984.4
5	1019.5	-5	980.4
6	1023.4	-6	976.5
7	1027.3	-7	972.6
8	1031.2	-8	968.7
9	1035.1	-9	964.8
10	1039.0	-៤០	960.9
11	1042.9	-៤០	956.9
12	1046.8	-៤០	953.0
13	1050.7	-៤០	949.1
14	1054.6	-៤០	945.2
15	1058.5	-៤០	941.2
16	1062.4	-៤០	937.3
17	1066.3	-៤០	933.4
18	1070.2	-៤០	929.5
19	1074.0	-៤០	925.5
20	1077.9	-៤០	921.6
21	1081.8	-៤០	917.7
22	1085.7	-៤០	913.7
23	1089.6	-៤០	909.8
24	1093.5	-៤០	905.9
25	1097.3	-៤០	901.9
26	1101.2	-៤០	898.0
27	1105.1	-៤០	894.0
28	1109.0	-៤០	890.1
29	1112.8	-៤០	886.2
30	1116.7	-៤០	882.2
35	1136.1
40	1155.4
45	1174.7
50	1193.9

CERTIFICATE OF PERFORMANCE

It is herewith approved that AK-HS 1000 product sensors for temperature logging in combination with the HACCP corticated ADAP-KOOL® controllers comply with EN 13485 in respect to temperature monitoring according to the EC regulation. 2005/37/EC.

ឈ្មោះ និងអាសយដ្ឋានរបស់អ្នកផលិតនៅក្នុងសហគមន៍អឺរ៉ុប

Danfoss A / S
Nordborgvej ៨១
DK 6430 Nord borg
ដាណឺម៉ាក

ការពិពណ៌នាអំពីឧបករណ៍

Product Temperature sensor for refrigerated cabinets and cold rooms requiring monitoring for HACCP documentation and alarm.

សង្ខេបបច្ចេកទេស

ជួរសីតុណ្ហភាព៖ ពី -១០ អង្សាសេទៅ +៥០ អង្សាសេ
ភាពត្រឹមត្រូវ៖ +/- 0,3 °C at 0 °C and +/- 0,005 °C x temp
ពេលវេលាថេរ៖ T90 = 3–15 mins.
ប្រភេទឧបករណ៍ចាប់សញ្ញា៖ Platinum-based sensors, Pt-1000 Ohm according to EN 60751 Class B
ការតភ្ជាប់ខ្សែ៖ AK temperature sensors are two-wire devices, (Cable: 2 x 0.22 ~ 1.5 mm2). All connections are interchangeable
ឯករភជប់៖ IP54 [Materials: Cover: ABS / មូលដ្ឋាន៖ Polycarbonate (PC)] thereby protecting the sensor against heat radiation from external ambient

Nordborg 2014-11-20
______________
ទីកន្លែង និងកាលបរិច្ឆេទនៃបញ្ហា

Thomas Matzen n
______________
Production Quality Manager r

To be completed by Installer/Contractor for site HACCP Manager Reference and Documentation

This AK-HS 1000 has been applied to the following application:

Location Name/Address: ______________________________________
Cabinet / Cold Room Reference: _________________
Installer / Contractor Name: ____________________
ចុះហត្ថលេខា៖ ____________
កាលបរិច្ឆេទ៖ _____/_____/_______