KLUS CS188-2m LED Channel System
Product Usage Instructions
Installation in Corners
For lighting angle of 45 degrees and good heat dissipation.
Mounting Options
- To the surface using dedicated accessories, mounting adhesive or double-sided adhesive tape.
- Easy assembly and disassembly by snapping in and out.
Additional Information
When choosing a different length of profiles or covers than available in the standard, opt for the cutting service at KLU.
FAQ
- Q: Can I mount the product without using adhesive tape?
A: Yes, you can use dedicated accessories for mounting the product to the surface. - Q: What is the maximum power of a single KLU LED strip that can be used with this product?
A: The maximum power of a single KLU LED strip is 24 W/m. - Q: Is it possible to obtain a line of light with this product?
A: Yes, this product allows for obtaining a line of light.
TECHNICAL DRAWING
Installation in corners
- Lighting angle: 45 Degrees
- Good heat dissipation
- Wide range of accessories
APPLICATION
furniture, functional and decorative lighting
MOUNTING
- to the surface, using dedicated accessories, mounting adhesive or double-sided adhesive tape
- easy assembly and disassembly by snapping in and out
ADDITIONAL INFORMATION
- standard lengths of KLUŚ profiles and covers: 1000 mm (tolerance ± 1.5 mm) and 2005 mm / 3010 mm (tolerance + 5 mm); for selected covers: 6050 mm, 10050 mm (tolerance + 5 mm)
- when choosing a different length of profiles / covers than available in the standard, you should additionally choose the cutting service at KLUŚ
TECHNICAL SPECIFICATIONS
Material | aluminum |
Possible fixture IP | 20, 67 |
Possible fixture shapes | linear |
Profile cross-section | angled |
Width Height |
0.7″ 0.7″ |
LED gluing width A | 0.4″ |
Number of LED strips A (0.31″ wide) | 1 |
Width of the glow | 11.2 mm |
Max power of a single KLUŚ LED strip | 24 W/m |
Lighting at an angle | 45 |
Possibility of obtaining a line of light | yes |
Building type Facility zone | Residential, Retail, Hotel / Restaurant, Entertainment/ Arts, Other office, kitchen, bathroom, furniture, niche/cove, advertising / POS, shop windows and exhibition |
Color | Length | Ref |
|
39.4″ | A04023A_1 |
78.9″ | A04023A_2 | |
118.5″ | A04023A_3 | |
|
39.4″ | A04023N_1 |
78.9″ | A04023N_2 | |
118.5″ | A04023N_3 | |
black anodized |
39.4″ | A04023A07_1 |
78.9″ | A04023A07_2 | |
118.5″ | A04023A07_3 | |
|
39.4″ | A04023L07_1 |
78.9″ | A04023L07_2 | |
118.5″ | A04023L07_3 | |
|
39.4″ | A04023L10_1 |
78.9″ | A04023L10_2 | |
118.5″ | A04023L10_3 | |
39.4″ | A04023L10OD_1 | |
TECHNICAL DRAWING
- Recommended for the construction of sealed lighting fixtures
APPLICATION
- LED protection and light diffusion in
MOUNTING
- to the extrusion, by pressing
ADDITIONAL INFORMATION
- standard lengths of KLUŚ profiles and covers: 1000 mm (tolerance ± 1.5 mm) and 2005 mm / 3010 mm (tolerance + 5 mm); for selected covers: 6050 mm, 10050 mm (tolerance + 5 mm)
- when choosing a different length of profiles / covers than available in the standard, you should additionally choose the cutting service at KLUŚ
TECHNICAL DRAWING
TECHNICAL SPECIFICATIONS
Material | PC |
Shape | flat |
Maximum length on request | 118.1″ |
Width | 0.5″ |
UV resistance | yes |
Finish | Light transmission | Length | Possibility of obtaining a line of light | Ref |
frosted | 59 % | 39.4″ | yes | B17208F_1 |
78.9″ | B17208F_2 | |||
118.5″ | B17208F_3 | |||
clear | 88 % | 39.4″ | no | B17208C_1 |
78.9″ | B17208C_2 | |||
118.5″ | B17208C_3 |
TECHNICAL DRAWING
APPLICATION
- aesthetic finish and protection of the interior of the
MOUNTING
- to the extrusion, by pressing
TECHNICAL SPECIFICATIONS
Material | PP |
Shape | triangular |
Height | 0.75″ |
Width | 0.75″ |
Corrosion resistance | yes |
Corrosion resistance at high salinity | yes |
TECHNICAL DRAWING
Cable exit hole
APPLICATION
- aesthetic finish and protection of the interior of the
MOUNTING
- to the extrusion, by pressing
TECHNICAL SPECIFICATIONS
Material | PP |
Shape | triangular |
Height | 0.75″ |
Width | 0.75″ |
Corrosion resistance | yes |
Hole | yes |
TECHNICAL DRAWING
- High mechanical and weather resistance
APPLICATION
- for mounting LED for mounting LED
MOUNTING
- to the surface, using a properly selected screw
- to the lighting fixture, with hooks
- easy installation and deinstallation of lighting fixtures by snapping in and out
TECHNICAL SPECIFICATIONS
Material | stainless steel |
Width | 0.79″ |
Height | 0.39″ |
Lifting capacity | 19.8 lb |
Color | Ref |
![]() |
C24144N00
24144 |
![]() |
C24262L07
24262 |
![]() |
C24265L10
24265 |
https://klusdesign.com, quotations@klusdesign.com KLUŚ LLC, 673 US Highway 1, Vero Beach, FL 32962
Documents / Resources
![]() |
KLUS CS188-2m LED Channel System [pdf] Owner's Manual CS188-2m, CS188-2m LED Channel System, LED Channel System, Channel System, System |