mailto:quotations@klusdesign.com
Owner's Manual for KLUS models including: CS188-2m, CS188-2m LED Channel System, LED Channel System, Channel System, System
CS188-2m LED Channel System Including Base Klus-A04023A-2m and Top Klus-B17208F-2m
File Info : application/pdf, 5 Pages, 636.77KB
DocumentDocument45-ALU Extrusion Ref. A04023 TECHNICAL DRAWING Installation in corners Lighting angle: 45 Degrees Good heat dissipation Wide range of accessories APPLICATION - furniture, functional and decorative lighting MOUNTING - to the surface, using dedicated accessories, mounting adhesive or double-sided adhesive tape - easy assembly and disassembly by snapping in and out ADDITIONAL INFORMATION - standard lengths of KLU profiles and covers: 1000 mm (tolerance ± 1.5 mm) and 2005 mm / 3010 mm (tolerance + 5 mm); for selected covers: 6050 mm, 10050 mm (tolerance + 5 mm) - when choosing a different length of profiles / covers than available in the standard, you should additionally choose the cutting service at KLU TECHNICAL SPECIFICATIONS Material Possible fixture IP Possible fixture shapes Profile cross-section Width Height LED gluing width A Number of LED strips A (0.31" wide) Width of the glow Max power of a single KLU LED strip Lighting at an angle Possibility of obtaining a line of light Building type Facility zone aluminum Color 20, 67 linear silver anodized angled 0.7" 0.7" silver non anodized 0.4" 1 11.2 mm 24 W/m black anodized 45 yes Residential, Retail, Hotel / Restaurant, Entertainment/ Arts, Other office, kitchen, bathroom, furniture, niche/cove, advertising / POS, shop windows and exhibition black lacquered white lacquered white lacquered Length 39.4" 78.9" 118.5" 39.4" 78.9" 118.5" 39.4" 78.9" 118.5" 39.4" 78.9" 118.5" 39.4" 78.9" 118.5" 39.4" Ref A04023A_1 A04023A_2 A04023A_3 A04023N_1 A04023N_2 A04023N_3 A04023A07_1 A04023A07_2 A04023A07_3 A04023L07_1 A04023L07_2 A04023L07_3 A04023L10_1 A04023L10_2 A04023L10_3 A04023L10OD_1 https://klusdesign.com, quotations@klusdesign.com KLU LLC, 673 US Highway 1, Vero Beach, FL 32962 HS-11 Cover Ref. B17208F, B17208C TECHNICAL DRAWING Recommended for the construction of sealed lighting fixtures APPLICATION - LED protection and light diffusion in lighting fixtures MOUNTING - to the extrusion, by pressing ADDITIONAL INFORMATION - standard lengths of KLU profiles and covers: 1000 mm (tolerance ± 1.5 mm) and 2005 mm / 3010 mm (tolerance + 5 mm); for selected covers: 6050 mm, 10050 mm (tolerance + 5 mm) - when choosing a different length of profiles / covers than available in the standard, you should additionally choose the cutting service at KLU TECHNICAL SPECIFICATIONS Material Shape Maximum length on request Width UV resistance PC flat 118.1" 0.5" yes Finish frosted clear Light transmission 59 % 88 % Length 39.4" 78.9" 118.5" 39.4" 78.9" 118.5" Possibility of obtaining a line of light yes no Ref B17208F_1 B17208F_2 B17208F_3 B17208C_1 B17208C_2 B17208C_3 https://klusdesign.com, quotations@klusdesign.com KLU LLC, 673 US Highway 1, Vero Beach, FL 32962 End cap 45-ALU Ref. C20124C02, C20124C10, C20124C07 Ref. arch 1383, 20003, 24070 APPLICATION - aesthetic finish and protection of the interior of the lighting fixture MOUNTING - to the extrusion, by pressing TECHNICAL DRAWING TECHNICAL SPECIFICATIONS Material Shape Height Width Corrosion resistance Corrosion resistance at high salinity PP triangular 0.75" 0.75" yes yes Color gray white black Ref C20124C02 1383 C20124C10 20003 C20124C07 24070 https://klusdesign.com, quotations@klusdesign.com KLU LLC, 673 US Highway 1, Vero Beach, FL 32962 End cap 45-ALU-OTW Ref. C20124C02TW, C20124C10TW, C20124C07TW Ref. arch 1440, 21003, 24085 Cable exit hole APPLICATION - aesthetic finish and protection of the interior of the lighting fixture MOUNTING - to the extrusion, by pressing TECHNICAL DRAWING TECHNICAL SPECIFICATIONS Material Shape Height Width Corrosion resistance Hole PP triangular 0.75" 0.75" yes yes Color gray white black Ref C20124C02TW 1440 C20124C10TW 21003 C20124C07TW 24085 https://klusdesign.com, quotations@klusdesign.com KLU LLC, 673 US Highway 1, Vero Beach, FL 32962 Mounting bracket 45-STN Ref. C24144N00, C24262L07, C24265L10 Ref. arch 24144, 24262, 24265 High mechanical and weather resistance APPLICATION - for mounting LED lighting fixtures MOUNTING - to the surface, using a properly selected screw - to the lighting fixture, with hooks - easy installation and deinstallation of lighting fixtures by snapping in and out TECHNICAL DRAWING TECHNICAL SPECIFICATIONS Material Width Height Lifting capacity stainless steel 0.79" 0.39" 19.8 lb Color silver black white Ref C24144N00 24144 C24262L07 24262 C24265L10 24265 https://klusdesign.com, quotations@klusdesign.com KLU LLC, 673 US Highway 1, Vero Beach, FL 32962