kinankvm DM7202 2 Port Dual Monitor HDMI KVM Switch User Manual
Overview
Product Description
The DM7202 is a 2-port KVM switch that supports 2 monitors and allows users to access two computers with 2 HDMI interfaces via a single USB keyboard and mouse.
Setting up the KVM switch is quick and easy, plug the cables into the appropriate ports. The KVM switch takes keyboard and mouse input directly, with no software to set up, no complicated installation procedures, and no compatibility issues.
Product Features
- A single USB keyboard and mouse controls 2 computers with 2 HDMI interfaces
- Support seamless switching between 2 computers
- Support USB2.0 HUB
- Supports resolution up to 3840×2160@30Hz
- Computer selection via front panel buttons, keyboard hotkeys, and mouse
- Support HDMI audio
- Support high-quality 2.1-channel surround system
- Hot-pluggable—Add or remove computers without power down the switch.
- Automatic scanning mode for monitoring all computers
- Support Windows, Linux, Mac, and Unix
Product Dimension
Rear Panel
| No. | Components | Description | |
| 1 |  |
Grounding the device | |
| 2 | IN 1 | IN1-A | Connect to PC1 Input 1-A |
| IN1-B | Connect to PC1 Input 1-B | ||
 |
Connect to PC1 | ||
| 3 | IN 2 | IN2-A | Connect to PC2 Input 2-A |
| IN2-B | Connect to PC2 Input 2-B | ||
| |
Connect to PC2 | ||
| 4 | AUDION IN | 1 | Connect to PC1 |
| 2 | Connect to PC2 | ||
| 5 | CONSOLE |  |
Audio Output |
 |
Connect to USB keyboard | ||
 |
Connect to USB mouse | ||
| OUT A | Connect to HDMI display A | ||
| OUT B | Connect to HDMI display B | ||
| 6 | DC12V | Connect to the 12V power supply | |
Installation guide
Before installation, please make sure all the devices are powered off.
- Connect the monitor, USB keyboard, and mouse to the CONSOLE port of the device according to figure ②.
- Connect the server to KVM with HDMI cable, USB cable, and audio cable according to figure ③.
- Connect the power adapter (Figure ④) to the KVM power socket.
- Power on the computer, you can easily switch between computers using the hotkey [L _Ctrl].
- Plug an independent speaker into the audio interface (Figure ⑤).
- Plug the USB external device into the USB interface (Figure ⑥).
* If the console monitor has a built-in speaker and supports audio through the HDMI port, there is no need to use a separate speaker.
Star to Use
Front Panel Buttons
| No | Components | Description |
| 1 | 1-2 | Press button 1-2 to switch between Port1 and Port2. |
Mouse Switching
| Function | Operating | Description |
| Mouse Switching | Hold down the middle button+ click the left button | Switch to the previous port |
| Hold down the middle button+ click the left button | Switch to the next port |
Hotkey Operation
Press [L _Ctrl] twice continuously (within 2S interval) to enter the keyboard hotkey mode. If no key is pressed within two seconds in the keyboard hotkey mode, the keyboard will exit the hotkey operation mode.
The hotkey commands are as follows: [L _Ctrl] + [L _Ctrl] + the corresponding key for each function.
| Function | Hotkey | Description |
| Port Switching | + [1- 2] | Switch between ports according to the set switching mode, for example: [L Ctrl] + [L Ctrl + [2] —> Quickly switch to port 2 |
| + [↑/↓] | Continuously switch to the previous or next port according to the set switching mode | |
| Auto scan | + [S] | Invokes Auto Scan. The KVM focus cycles from port to port at 5 second intervals. Press any key on the keyboard to exit the automatic scan. The automatic scan time is 5-99s, move the mouse to extend the scan time. |
| Set auto scan interval | + [T] + [0~9] +[Enter] | Set the automatic scan interval (5-99s).For example: Press [L _Ctrl] + [L _Ctrl] + [T] + [1] + [2]+ [Enter], the auto scan time will be set as 12S. |
| Hotkey cycle | + [F] | Hotkey Cycle Mode (L_Ctrl→ F12→L_Ctrl) |
| Mouse Switching | + [W] | Enable/disable mouse switching |
| Audio lock/unlock | + [A] | Lock the audio focus on the current port, press thishotkey again to unlock |
| USB HUBlock/unlock | + [U] | Lock the USB HUB on the current port, press thishotkey again to unlock |
Specifications
| Model | DM7202 | ||
| Computer Connections | Direct | 2 | |
| Max | 2 | ||
| Port Selection | Pushbutton, Hotkey, Mouse | ||
| Connectors | Console | Monitor | 2x HDMI Type A |
| Keyboard/mouse | 2x USB Type A (White) | ||
| Audio Output | 1x Min Audio Jack (Pink) | ||
| KVM | Monitor | 4x HDMI Type A | |
| Keyboard/mouse | 2x USB Type B | ||
| Audio Input | 2x Min Audio Jack (Pink) | ||
| USB2.0 Port | 1x USB Type A (White) | ||
| Button | Port Selection | 2x buttons | |
| LED | Selected (Green) | 2 | |
| Power Input | DC12V/2A | ||
| Resolution | 3840×2160@30Hz1920x1080@60Hz | ||
| Power Consumption | 9W | ||
| Environmental Requirement | Operating Temperature | 0-50℃ | |
| Storage Temperature | -20-60℃ | ||
| Humidity | 0-80%RH, non-condensing | ||
| Physical Features | Material | Metal | |
| Net Weight | 1.6Kg | ||
| Product Dimension | 270mmx166mmx44mm | ||
| Package Dimension | 395mmx274mmx110mm | ||
@All right reserved Shenzhen Kinan Technology Co., Ltd.
Print Date: 2024/11
Version: V1.0
Documents / Resources
 |
kinankvm DM7202 2 Port Dual Monitor HDMI KVM Switch [pdf] User Manual DM7202, DM7202 2 Port Dual Monitor HDMI KVM Switch, DM7202, 2 Port Dual Monitor HDMI KVM Switch, Monitor HDMI KVM Switch, HDMI KVM Switch, KVM Switch, Switch |
