Q2 Pro Bluetooth Mechanical Keyboard
User Guide
Fully Assembled Version
Keyboard
1x Fully Assembled Keyboard
Including
1x Aluminum Case
1x PCB
1x PC Plate
1x Sound Absorbing Foam
1x Case Foam
14x Gaskets (10 Installed and 4 in the Box)
4 Sets x Stabilizers
1 Set x Keycaps (PBT Double-shot)
1 Set x Switches
Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key
Barebone Version
Keyboard Kit
1x Keyboard Kit (Without Keycaps & Switches)
Including
1x Aluminum Case
1x PCB
1x PC Plate
1x Sound Absorbing Foam
1x Case Foam
14x Gaskets (10 Installed and 4 in the Box)
4 Sets x Stabilizers
Cable
1x Type-C to Type-C Cable
1x Type-A to Type-C Adapter 
Tools
1x Switch Puller
1x Keycap Puller
1x Screwdriver
1x Hex Key
Quick Start Guide
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Connect Bluetooth 
Connect Cable 
The VIA Key Remapping Software
Please visit caniusevia.com to download the latest VIA software to remap the keys.
If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction. (VIA only works when the keyboard is connected by wire to the computer.) 
The Layers
There are five layers of key settings on the keyboard.
The layer 0 is for the Mac system.
The layer 1 is for the Windows system.
The layer 2 is for the Mac Multimedia keys.
The layer 3 is for the Windows Multimedia keys.
The layer 4 is for the Function keys. 
If your system toggle is switched to Mac, then the layer 0 will be activated. 
If your system toggle is switched to Windows, then the layer 1 will be activated. 
Multimedia Key and Function Key
Multimedia keys 
Function keys 
In order to get Multimedia Key, you need to press fn1 and 
Key.
In order to get Function Key, you need to press fn2 andKey.
The Backlight
Adjust The Backlight Brightness
Press fn1 + S to increase the backlight brightness 
Press fn1 + X to decrease the backlight brightness 
Warranty
The keyboard is highly customizable and easy to be rebuilt.
If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard. 
Watch The Building Tutorial On Our Website
If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.
Factory Reset
Troubleshooting? Don’t know what’s going on with the keyboard?
- Plug in the power cable and switch the keyboard to Cable mode.
- Factory reset the keyboard by pressing fn2 + J + Z (for 4 seconds).
- Download the right firmware and QMK Toolbox from our website.
- Switch the keyboard to OFF mode and remove the space bar keycap to find the reset button on the PCB.
- Hold the reset key first, then switch the keyboard to Cable mode.
- Release the reset key, and the keyboard will now enter DFU mode.
- Flash the firmware with the QMK Toolbox.
- Factory reset the keyboard again by pressing fn2 + J + Z (for 4 seconds).
* Step by step guide can be found on our website.
Q2 PRO BLUETOOTH MECHANICAL KEYBOARD SPECIFICATIONS
Number of keys: 66
Switch type: Mechanical
Battery: 4000mAh
Bluetooth working time (RGB): Up to 100 hours (Lowest brightness)
Charging time: Around 5 hours
Charging port: USB Type-C
Mode: Bluetooth / Wired
Bluetooth operating distance: Within 10 meters (open space)
Name of Bluetooth device: Keychron Q2 Pro
Documents / Resources
 |
Keychron Q2 Pro Bluetooth Mechanical Keyboard [pdf] User Guide Q2 Pro, Q2 Pro Bluetooth Mechanical Keyboard, Bluetooth Mechanical Keyboard, Mechanical Keyboard, Keyboard |
 |
Keychron Q2 Pro Bluetooth Mechanical Keyboard [pdf] Instruction Manual Q2 Pro, Q2 Pro Bluetooth Mechanical Keyboard, Bluetooth Mechanical Keyboard, Mechanical Keyboard, Keyboard |
