KENWOOD DRV-A610W Dash Cam Manager App

Product Information

Specifications

• Model: DRV-A610W ba7
• Firmware Version: V1.0.01
• Application Version: V1.0.01
• Wireless Link Function: Yes
• Internet Connection Required: Yes

Product Usage Instructions

1. Check for Firmware Updates
   Open the KENWOOD DASH CAM MANAGER APP on your smartphone and navigate to the MKII DASHBOARD page.
2. Select Device and Initiate Update
   Go to the ABOUT page and select the Firmware Update option. Choose the device you wish to update.
3. Download Firmware
   Follow on-screen instructions to download the latest firmware. Ensure a stable internet connection.
4. Transmit Firmware to Device
   The phone will transmit the downloaded firmware wirelessly to the device. Do not turn off the device during transmission.
5. Update Device Firmware
   Press Update on your phone to start the update process on the device. Do not disconnect the device’s power during this time.
6. Finalize Update Process
   After the update completes, the device will automatically restart. Do not press any buttons or turn off the device during this period.

Frequently Asked Questions (FAQ)

• Q: How long does the update process take?
  A: The update process typically takes 1-2 minutes to complete. Ensure a stable power source during the update.
• Q: What happens if the update fails?
  A: If the update fails, contact customer support for assistance. Do not attempt to restart or interrupt the process.

Firmware Update Instruction

OTA updates via the KENWOOD DASH CAM MANAGER APP on a smartphone

1. Open the KENWOOD DASH CAM MANAGER APP on your phone and navigate to the MKII DASHBOARD page. When your phone detects a new firmware version, “Updates Available” will be displayed beneath your device name, and a yellow dot will appear next to ABOUT page indicating the presence of new firmware.
2. Go to the ABOUT page, and you’ll see the “Firmware Update” option showing “Update the latest firmware” accompanied by a yellow dot. Click on it and select the device you wish to update.
3. After clicking, you’ll be directed to the FIRMWARE UPDATE page. Follow the on-screen instructions to download the latest Firmware and confirm the update.
4. At this point, the phone will transmit the downloaded firmware to the device using the wireless link function.
5. Once the transfer is complete, press “Update” on your phone, and the device will begin the update process. Please do not disconnect the device’s power during this time. The update will take approximately 1-2 minutes. 
6. When the update starts, there will be a popup message as picture below. DO NOT TURN OFF OR PRESS ANY BUTTON DURING THIS PERIOD, IT MAY CAUSE THE UPDATE FAILURE.
7. It may take a while for updating. Once it finishes the update, Dash Cam will turn off the device automatically.
8. Once it finishes the update, you can turn on the device and check the ABOUT page of the KENWOOD DASH CAM MANAGER APP. If the “Firmware Update (Rear Camera)” shows “Your firmware is up to date,” the update was successful.

Documents / Resources

KENWOOD DRV-A610W Dash Cam Manager App [pdf] Instructions DRV-A610W, ba7, DRV-A610W Dash Cam Manager App, DRV-A610W, Dash Cam Manager App, Cam Manager App, Manager App, App

References

• User Manual