Keilton WP1018 8 Key Battery Powered Wall Switch
Specifications
- Model: HVIN:WP1018.A0
- Color: N/A
- Dimensions: N/A
- Weight: N/A
- Material: N/A
INSTRUCTIONS
- Install 1pc CR2032 battery by opening the back cover.
- Simultaneously press and hold the “DIM+” and “ON” buttons for two seconds to enter pairing mode.
- In Keilton App “Switch” page, click to add the switch.
- Select the light/light group to be controlled by this switch.
- Select 4 scenes to be controlled by this switch. HVIN: WP1018.A0,
TIPS: This Bluetooth device is compatible with Keilton lighting control system only.
IMPORTANT
Battery model# CR2032. The battery can be used for 5 years based on the usage of twice a day.
BATTERY INSTALLATION
BRACKET INSTALLATION
WALL SURFACE INSTALLATION
Note: The WP needs to be purchased separately
How to Install Keilton APP?
Scan below QR code for downloading the APP.
How to Control Lights with a Phone?
Scan to download Keilton APP instruction
WARRANTY INFORMATION
Our company warranties this product to be free of defects in materials and workmanship for a period of five(5) years.There are no obligations or liabilities on the part of our company for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation orreinstallation. Contact: sales@litetrace.com
FCC Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/ TV technician for help.
RF Exposure
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
IC STATEMENT
This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
Assembly:
Follow the assembly instructions provided in the user manual to properly set up the product.
Power On/Off:
To power on the product, press the power button located on the device. To power off, press and hold the power button until the device shuts down.
Settings Adjustment:
Use the settings menu to adjust various features such as brightness, volume, or other settings as per your preference.
Maintenance:
Regularly clean the product using a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that may damage the product.
FAQs
How do I troubleshoot if the product is not turning on?
Check the power source and ensure it is connected properly. Try a different power outlet or recharge the product if it is battery-operated.
Can I use this product outdoors?
Refer to the user manual to check if the product is suitable for outdoor use. Avoid exposing the product to extreme weather conditions.
Documents / Resources
 |
Keilton WP1018 8 Key Battery Powered Wall Switch [pdf] User Manual 2A26YWP1018, WP1018, WP1018 8 Key Battery Powered Wall Switch, 8 Key Battery Powered Wall Switch, Battery Powered Wall Switch, Powered Wall Switch, Wall Switch |