kebidu Memory Card Reader User Manual

Kebidu Memory Card Reader

Overview

This voice replacement remote control is designed for fast content navigation and voice use, including preset application shortcuts, and it can be paired with compatible Fire TV devices.

Specifications & Compatibility

Quick Setup & Pairing

1. Press and hold the Home button for approximately 10–15 seconds.
2. Release the button when the LED starts to flash rapidly, indicating Pairing Mode.
3. Wait 30–60 seconds for the remote to automatically pair with your device.

Compatible with

• This voice replacement remote control is only applicable to Fire TV Stick (4K, 4K Max, Lite), Fire TV Stick (2nd Gen,3rd Gen), Fire TV Cube (1st Gen and later), and Fire TV Stick 4K bundle.

Not Compatible with

• Please note, this remote control can not compatible with Fire TV (1st and 2nd Gen), Fire TV Stick (1st Gen), or Fire TV Edition smart TVs. If your product doesn’t work, please send your message to us, we must give you the best solution in the end.

With Voice Function

• You can ask it to find your favorite content. Quickly jump to your favorite scenes with standard navigation and playback controls. Preset 4 app button shortcuts, Quick access to your favorite content.

How to Pair

• First, press and hold the Home button for about 10-15 seconds. Release when the LED starts to rapidly flash (Entering Pairing mode). Wait about 30-60 seconds,
• Then the remote should automatically pair with your device.

Trouble Shooting

If you’re trying to control the TV volume and power with the Fire TV remote but it doesn’t work, we recommend following the Equipment Control steps after putting fresh batteries in the remote. Also, ensure the device has no pending updates before you try.

Product Description

1. Go to Settings on your Fire TV device.
2. Select Equipment Control.
3. Select Manage Equipment.
4. Select TV.
5. Select Change TV.
6. Select Change TV again to confirm.
7. Wait for your remote to be prepared.
8. Select your brand of TV. The most common brands are listed first. Then there will be an all-inclusive list of brands in alphabetical order. Should you not see your brand, select Brand not listed, which will be at the bottom of the list.

SAFETY INSTRUCTION

Warning:

• General Safety Advisory: This area, operation, or product may involve inherent risks. Always assume potential hazards are present until proper safety verification is completed.

Essential Precautions:

• Assess the Environment: Look for and identify potential dangers such as electrical sources, trip hazards, toxic substances, or moving machinery before proceeding.
• Use Personal Protective Equipment (PPE): Wear appropriate PPE (e.g., safety glasses, gloves, helmet) as required for the specific task or environment.
• Follow Procedures: Never bypass safety protocols, guards, or interlocks. Use equipment only for its intended purpose.
• Stay Alert: Do not operate machinery or perform hazardous tasks if you are fatigued, distracted, or under the influence of medication or substances that impair judgment.

Immediate Action Required:

• STOP if you are uncertain about the safety of any action.
• CONSULT the relevant official safety manuals or qualified personnel for guidance.
• DO NOT PROCEED without proper authorization and training for hazardous tasks.
• Your safety and the safety of others are paramount.
• Neglecting warnings can lead to severe injury or fatal accidents.

CE marking

• This symbol indicates that this product conforms to all applicable European Union regulations.
• Conformité Européenne” (CE) confirms that the product meets the essential requirements for health, safety, environmental protection, and consumer protection as laid down in EU directives
• By affixing the CE marking, the manufacturer declares that the product is in compliance with all legal requirements for CE marking and may be placed on the market throughout the European Economic Area.