KDD-738 Multifunctional Projector Stand

Multifunctional Projector Stand
Please read these instructions before use and keep them for future reference.

Packing List

Product Dimension

Use on Desktop and Flat Surface

1. Step 1: Open the stand so that it can stand smoothly,
2. Step 2: Take out the ball head, align it with the hole at the top of the stand, tighten it with a Z-shaped hand screw, and then just secure the projector to the ball head.

Use on Wall or Ceiling

1. Step 1: Remove the 4 round feet bumpers from the bottom of the stand.
2. Step 2: Place the wall fixing sheet metal from the bottom of the stand. onto the wall/ceiling and draw 4 marks aligning the four hole positions.
3. Step 3: Drill holes at marked locations anchors into the holes and then insert the screws well and rotate the mounting into the anchors,
4. Step 4: Align the holes in the bottom of the stand with the screws on the wall fixing sheet metal, then insert and tighten with hand nuts.
   

Step 5: Use on Wall

1. Take out the ball head and attach the projector to the ball head first.
2. Align the ball head with the holes on the side of the stand and tighten it on the stand with a Z-shaped hand screw.

Step 5: Use on Ceiling

1. Mount the ball head on top of the stand and tighten it to the stand with a Z-shaped hand screw.
2. Mount the projector to the ball head to use it.

Lifetime Technical Support
For more information, don’t hesitate to get in touch with KDD Customer Service at Contact@KDDservice.com

ContactUs
Email: Contact@KDDservice.com
Instagram: https://www.instagram.com/kddstoreofficia/

Facebook: https://www.facebook.com/KDDstoreofficial

Documents / Resources

KDD KDD-738 Multifunctional Projector Stand [pdf] User Manual KDD-738 Multifunctional Projector Stand, KDD-738, Multifunctional Projector Stand, Projector Stand, Stand

References

• User Manual