KASTA RM1440BH-W Smart Switch Relay Mechanism

Installation Instructions

Smart Switch Relay Mechanism
Product Code: RM1440BH-W

APP Installation
Visit www.kasta.com.au or your app store to download the free KASTA app. iOS: requires iOS 9.0 or later. Android: requires Android 4.4 or later. Devices must support Bluetooth 4.0

Important Safety Informatioin

• This product must be installed by a licensed electrician in accordance with all the require ments of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
• Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
• Indoor use only. Not suitable for damp or explosive environments.
• Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
• No user serviceable parts inside.

FEATURES

• Relay for switching a load on and off.
• Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups.
• Push Button Control.
• Fits most Australian Standard wall mech apertures.
• Simple 3 wire connection-Active in, load out and neutral.
• Integral blue backlight that can be enabled/disabled after installation.
• Multi-way load switching possible using KASTA remote switches.

FUNCTION SETUP

• ON/OFF SWITCH                                                                                                        1 CLICK
  Turns load or off.
• DELAY TO OFF                                                                                                            3 CLICKS*
  Load automatically turns off after set time.
• PAIRING MODE                                                                                                           6 CLICKS
  Enter pairing mode for multi-way switching. Lights will pulse.
• BACKLIGHT ON/OFF                                                                                                 7 CLICKS
  Disables or enables backlight on button.
• FACTORY RESET                                                                                                          9 CLICKS
  Restores all settings back to factory.
  If successful, light will pulse the number of times that the switch was clicked, indicating function.

TECHNICAL SPECIFICATIONS

• Operating Temp: -20ºc to 40ºc
• Supply: 220-240V AC 50Hz
• Load: 480W
• Thermal Derating: 25ºc to 40º (480W-100 W)

CONNECTION DIAGRAM

Documents / Resources

	KASTA RM1440BH-W Smart Switch Relay Mechanism [pdf] Instruction Manual RM1440BH-W, Smart Switch Relay Mechanism, Relay Mechanism, Switch Relay Mechanism
	KASTA RM1440BH-W Smart Switch Relay Mechanism [pdf] Installation Guide RM1440BH-W Smart Switch Relay Mechanism, RM1440BH-W, RM1440BH-W Smart Switch Relay, Smart Switch Relay Mechanism, Smart Switch Mechanism, Smart Relay Mechanism, Smart Switch, Smart Relay, Switch Relay Mechanism, Relay Mechanism, Switch Mechanism, Switch, Relay

References

• User Manual