KASTA C300IBH Smart Curtain Control Module
Product Code: KASTA-C300IBH
APP Installation
Visit www.kasta.com.au or your app store to download the free KASTA app. iOS: requires iOS 9.0 or later. Android: requires Android 4.4 or later. Devices must support Bluetooth 4.0
Important Safety Information
- This product must be installed by a licensed electrician in accordance with all the require ments of AS/NZS 3000 (current edition) and other relevant Standards and Regulations.
- Electricity MUST be disconnected prior to installation. Failure to do so may result in serious injury and or loss of life.
- Indoor use only. Not suitable for damp or explosive environments.
- Complies to Australian Standards AS/NZS 60950.1:2015, AS/NZS CISPR 15.
- No user serviceable parts inside.
FEATURES
- Mains powered curtain control module
- Compatible with standard bidirectional 4-wire motors (2 Active, 1 Neutral, 1 Earth).
- Single phase 240AC max. or 24VDC max. power.
- Simple 7 wire connection – A, N, Com, Open, Close, S1, S2.
- Install in conjunction with an appropriately rated momentary action mechanism to S1 and S2.
- Can be paired with KASTA remote switches for either single button operation or two-button operation (8x maximum).
- Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups.
- Built in overvoltage and overcurrent protection.
- To prevent a reduction in Bluetooth ® signal strength, install away from metal objects.
FUNCTION SETUP
First calibrate curtain using KASTA app.
S1 CONNECTION
Restores all settings back to factory.
TECHNICAL SPECIFICATIONS
- Operating Temp: -20ºc to 40ºc
- Supply: 220-240V AC 50Hz
CONNECTION DIAGRAM
kasta.com.au | (02) 9168 5900
Documents / Resources
 |
KASTA C300IBH Smart Curtain Control Module [pdf] Instruction Manual C300IBH, Smart Curtain Control Module |
 |
KASTA C300IBH Smart Curtain Control Module [pdf] Instruction Manual C300IBH Smart Curtain Control Module, C300IBH, Smart Curtain Control Module, Curtain Control Module, Control Module, Module |
