jwlabs A4.1 Rife Machine Instruction Manual
MODEL A4.1
Watch our video on How To Use Your JWLABS A4.1 Rife Machine.
Disclaimer
JWLABS Machines are media adapters that act as transducers, converting audio frequencies such as the sound of music to electrical impulses which the user feels as gentle vibrations or a tingling sensation. The JWLABS Machines are not designed to nor do we intend that they will exercise any structure-function effect on the user.
These are not FDA certified medical devices and we offer them only for general well being and entertainment purposes.
Warranty
Customer understands and agrees that in the event of a failure of the device, JWLABS reserves the right to repair or replace the device with another. JWLABS may replace the device with any instrument of their choosing of greater or lesser value than the original, until such time as the defective device can be permanently replaced or repaired. In no case will repaired or replacement devices be shipped to the Customer until any loaned device in the Customer’s possession is returned in good condition. JWLABS reserves the right to assess damage to any device it has
made for Customer, to determine if the device has been damaged due to negligence on the part of the Customer. JWLABS assessment of damage will be final, and if the Customer is found negligent, JWLABS reserves the right to collect money for the repair or replacement from the Customer, prior to the replacement or repaired device being shipped to the Customer.
Warranty extends only to the innards of the Model A. It does not include wires or other accessories.
It does not include the re-chargeable battery which is located on board. The battery can be replaced for cost at our factory.
PLEASE NOTE: Do NOT attempt to open the top or bottom of the device. Any indication that this has been attempted will void the warranty in its entirety.
Wright Laboratories, LLC
205 E. Butterfield Road, Suite 227, Elmhurst, IL 60126
888.891.1122 • 708.356.6513 • info@jwlabs.com
©2023 Wright Laboratories, LLC
WELCOME TO THE GLOBAL COMMUNITY OF JWLABS MODEL A USERS!
You have made a sound decision! You have acquired a device that is the instrument of choice for people who understand the value of applying microcurrent to the body. Our instruments transform audio frequencies to electrical output which produces a tingling sensation at the place of contact. This electrical stimulation can be acquired from our specially tuned sessions or from your favorite music. Explore the sensations of our Tactio® feature which makes music a whole body experience!
JWLABS Machines are media adapters that act as transducers, which convert audio frequencies, including music, to electrical impulses the user feels as gentle vibrations or a tingling sensation.
Our instruments are not FDA certified medical devices. We offer them only for general well being and entertainment purposes.
Once you experience our Rife technology you will appreciate why our customers use our machines routinely to improve, preserve and protect their well being.
Frequency matters… Change Your Tune!
Watch our video on How To Use Your JWLABS A4.1 Rife Machine.
WARNINGS
Check with your physician before beginning use of the device.
DO NOT use this device if you have a pacemaker and/or defibrillator or other sensor, monitor or electronic device.
DO NOT use the device on children under 18 years old and do NOT allow children to use the device without adult supervision.
DO NOT use the device near water.
DO NOT plug electrode wires into an electrical outlet.
DO NOT place electrodes in places on the body other than the palms of the hands and/or soles of the feet because it may cause skin irritation, injury or burns.
DO NOT apply electrodes over the heart or above the neck because it could cause serious injury.
DO NOT engage in any use of the device which is not expressly stated in our material. If the user engages in using the device for anything other than entertainment, the user accepts full responsibility for the consequences such as serious physical injury.
If the user feels any sensation of pain, burning, skin irritation, or shock stop using the device immediately and turn it off. Seek medical advice if necessary.
CAUTIONS
Read all instructions carefully before beginning use.
Turn the amplitude dial all the way down (counter clockwise) at the end of each session, ensuring that you begin each track with the amplitude minimized. In this position, you can make adjustments to your connections, to your track selection, or turn your device on or off.
We recommend limiting the use of the device to an hour.
60 minutes is the recommended maximum duration of a session. Usage beyond 60 minutes per session could result in temporary feelings of fatigue or headache. We encourage you to drink plenty of water before, during and/or after your sessions.
If headache or fatigue persists for more than two hours, you may want to consult your physician.
Check the device before each use to make sure all components are intact and that no wires are frayed. Do NOT use device if wires are frayed or damaged. Doing so may result in a shock, or no output at all.
When using the machine with two people at a time, ensure that the person who feels the current first is in charge of the amplitude setting.
MAINTENANCE
Clean your device with a soft cloth. Do NOT apply cleaning agents to the instrument.
Store your device with the case closed to protect the inner components.
Check your electrode pins for carbon build up before each use. The carbon build up could interfere with the conductivity and could cause no output or intermittent output, which the user may experience as a shocking sensation. A fine emery board or sandpaper will prevent residue accumulation on the electrode pins.
DO NOT let the battery drain below 50% or the device may not work properly. For best results, recharge the battery when the indicator light shows 50% discharge.
GENERAL BACKGROUND
JWLABS has been producing products since 1987 which are based on the long history of Rife technology. Originally built by hand in our workshop, our devices have long been assembled in state-of-the-art factories in the US. We have stayed true to our commitment to the original analog signal (Audiophiles appreciate the significance of this, in that the output is more natural, full bodied than those created digitally. This means that with each frequency we deliver, the harmonics around that number are produced.) Our instruments are designed to provide the ability to play frequencies from an outside source, including music. This feature delivers a thrilling experience of tactile music, and provides entertainment value which is unique to our devices.
We call this feature Tactio. You may also play specifically tuned frequencies from an outside source through your Model A.
The Basics of JWLABS Rife Technology
Our basic strategy has always been to provide expert frequency tuning throughout the lower end of the audio range. Though many have referenced targeted frequencies for specific health conditions, we do not make or imply such claims. Each of JWLABS frequency sessions provides concentration on certain key numbers, accompanied by sophisticated tuning techniques such as sweeping (both upward and downward) and dithering. These techniques, coupled with the original analog source of our sessions, provide a carefully composed and expertly tuned experience of electro-stimulation.
Our devices are intended to appeal to people who are not interested in learning the intricate details of Rife technology, but prefer a research based user-friendly format which is designed to enhance their General Wellness.
Our recorded sessions are a form of music. They are hand-tuned and played with skill, much like any musical instrument is played while music is recorded. The needs and preferences of the user are anticipated in the contents of each recording, or score. Satisfaction of the experience can be realized with little or no education required.
We’ve prepared numerous sessions for you to explore, and you may also relish the Tactio® experience which involves playing your favorite music through your machine rather than utilizing our specialized sessions. This allows you to feel the frequencies of your music — a unique and multidimensional experience. You are in for a treat!
All of our sessions are created on JWLABS Model B27, our analog instrument, and are recorded by channels A, B, C and D. The energy our machines use is a volts/amps electrical current, balanced in a way that feels good to the user. With our specialized tuning, you will have the confidence and freedom to explore numerous variations in your sessions, including emphasis on certain frequencies (and ranges of frequencies).
Some people prefer to feel the energy on their palms, others choose to apply the electrodes to the soles of their feet. Each approach will produce a variation in sensation.
With the exception of the General Alignment recording, the frequency range for each channel used from the Model B always corresponds to the four tracks of each session title as follows:
Each title is masterfully tuned throughout these ranges with specific sets of exact traditional frequencies, which have been known to be helpful for thousands of users.
Our tuning is both general and specific in emphasis, ensuring that you have a comprehensive session.
WHAT IS TACTIO®?
John Wright conceived Tactio® very early in his career of developing Rife machines. He understood that the safest range of frequencies is in the audio range, and he designed his early instruments with an audio jack, making it possible to record the hand tuned frequency sessions in real time. He knew that the potential for tactile music was promising.
Do you love music? This will take your enjoyment to a whole new level. The thrill of listening to your favorite music and feeling the electron flow that these selections produce is second to none. Our devices have gone through many renditions, and we’re proud to offer this safe and exhilarating experience to our customers.
What you will need:
- Input cable (provided in your startup kit.)
- Headset (wired) with a volume control
- Music source with a headphone jack (CD player, computer, tablet, iPhone or smartphone)
- Model A4
Simply plug your input cable into the device you’re using to play your music. Attach your headset to the Tactio® jack and set up your electrodes for a regular Rife session. Be prepared to adjust the amplitude as the music intensifies or becomes more subdued. The display on your Model A4 will say “Tactio® mode” when you are streaming music or any other audio signal through your machine.
Tactio® will bring you hours of entertainment and will provide an entirely new way for you to introduce your friends and family to Rife technology.
It’s fun, it’s energizing. Put a new level of vibrancy in your life!
OPERATING INSTRUCTIONS
YOUR NEW A4.1
LEGEND
- Button
- Grip
- Latch
- Plastic Grip
- Button Lip
OPEN INSTRUCTIONS
TAKE AN INVENTORY
First, take a moment to inventory what you have received. Compare the contents with the packing slip to verify that your shipment is complete. If anything is missing or appears damaged, contact us immediately. Save all packing materials.
YOUR MODEL A4.1
Your Model A4.1 Start Up Kit Consists of the Following:
- Two sets of Electrode Wires:
(1) 6-ft set and (1) 10-ft set - USB Cable and Charging Cube
- Input Cable
- (4) White Adhesive Electrode Patches (“Softies”)
- Instruction Manual
OUTSIDE FEATURES
Your Model A4.1 is approximately 6.3” long x 4.7” wide x 2.2” high and weighs around one pound. The Model A4.1 is built into an extremely durable, crush-proof, water-resistant enclosure. When closed, your Model A4.1 is very secure.
GETTING TO KNOW YOUR MODEL A4.1
MODEL A4.1 TOUCHSCREEN
The Voltage Indicator located to the left of the Battery Icon on the display screen indicates the output being used (measured in Volts). The maximum is 80 Volts.
Notes to Remember
- All new users, or people who are beginning after a long hiatus will begin with Track 2 of General Alignment, building their time as recommended above.
- General Alignment (GA Tracks) is the only session which is comprised of five tracks of various lengths.
- All other Titled Sessions are composed of four tracks, each being approximately thirty minutes long.
- You will rarely, if ever, use full power and only on the highest tracks. However, It’s normal to need extra power when the electrodes are placed on the soles of your feet.
- We advise that experienced users employ their device no more than an hour per day.
- We recommend that you drink plenty of water before, during and/or after your sessions.
Preparing for Your Session
CAUTION: Make sure your Model A is powered off and the amplitude is in the power down position before beginning these steps.
BEGINNERS will use only the General Alignment (GA) session.
- Ensure that the polarity switch is in the positive position. (This indicates that your red tipped electrode wire is positive.)
- Separate the red and white ends of your electrode wires to about 12 inches. Insert the pins on the ends of the wires into the port on the electrode patches. Place the electrode patch with the red lead wire (indicating positive) onto your right palm and the electrode patch with the white lead wire (indicating negative) onto your left palm.
- Power on your Model A unit. Press the home screen to bring up the main menu. Select GA Tracks (General Alignment, located in the lower right corner), then select TRACK 2.
- With the amplitude turned down and the electrode patches in place on your palms, press PLAY to begin your session. (We recommend beginning with TRACK 2 because TRACK 1 is more intense.)
- Turn the AMPLITUDE clockwise to a level that is COMFORTABLY STRONG, but not more than four to five turns. This guidance generally applies to the lower tracks of any of the recordings. It’s normal to tolerate more amplitude on the higher tracks.
Turn the AMPLITUDE all the way down if you pause during a session as well as between the tracks of your session. - At the end of your session, turn the AMPLITUDE all the way down (counter clockwise). Turn the machine off.
- Remove electrode patches from your palms and place them back onto the plastic shield provided. This will protect the patches and help them last longer. Remove all replaceable wires from your unit and close the case.
- If you would like to use the Tactio® feature, insert one end of the Input Cable into the jack marked “Input” and the other end of the Input cable into the headphone jack of your media source.
Basic Instructions – GENERAL ALIGNMENT (GA)
We recommend that you begin your exploration conservatively, say with a ten – fifteen minute session. (This is true even for folks who have used other Rife machines.) Allow your body to get used to the experience before gradually building up your time to about an hour.
Our General Alignment Rife session is where everyone begins.
It’s ideal for beginners AND for folks re-starting on their machine after a lengthy furlough.
This session is also excellent for routine maintenance. The healthy person will be able to move consistently through the tracks of the General Alignment (GA) session smoothly.
Our Rife sessions are divided into tracks. The lower tracks deliver the lower frequencies, moving higher as we go up in tracks, the highest being the last track of a given session.
You will note a different sensation on each track at the place of contact (usually palms and/or soles of feet).
Most users will begin with Track 2 for not more than 10 minutes per day, five days in a row, taking two days off each week. (In certain circumstances, the user will begin with Track 5 (please call us for more information). This is a five minute track.
Start each track before increasing Amplitude. This will avoid any sensation of a sudden burst of output.
Begin as follows
- Track 2 (10 minute track)
- After completing this Rife session for 3-5 days, introduce ten minutes of Track 3 — After a couple days here, bring in ALL of track 3.
- After 3-5 days of tracks 2 and 3, add Track 4 for ten minutes. When you have completed 3 to 5 days of this, bring in ALL of Track 4 and Track 5.
- When you have completed 2-5, you may circle back to Track 1 — We’re sometimes as low as 3hz on the beginning of any Track 1.
- You will now use the entire session, tracks 1 through 5. Tracks 1 through 5 comprise the entire General Alignment session, totaling about 73 minutes.
- You will note that the frequencies on the lower tracks are quite slow. They have a more pronounced “beat” and you will prefer to have the amplitude lower than on the other tracks. This is perfectly normal. The final track of any recording, on the other hand, is composed of much higher frequencies which require more power. You will notice a desire to intensify the amplitude accordingly.
- Set the amplitude to your comfort level. Feel free to adjust it at any time, given the range of frequencies you are using. You may wish to make adjustments to the amplitude, especially when you are using Music as the source of your frequencies. Each instrument has a different “voice” and each type of music has a different rhythm. The nature of your music selection may prompt you to adjust the amplitude higher or lower as you progress through each musical selection. This is normal.
Outline of General Alignment (GA) Session
Track 1 – Delivers 3 – 33hz (23 minute sweep)
These frequencies are very slow. Some are slower than our brain waves in the waking state. For this reason, people sometimes feel more calm when using this track. Others may feel more energized. We recommend that users add this track to their routine only after they have progressed through tracks 2-5.
Track 2 – Delivers 33 – 404hz (10 minute sweep)
These frequencies remain in the lower end of the range which we address. This is where beginners initiate their exploration.
Track 3 – Delivers 383hz – 700hz (17 minute sweep)
These mid-range frequencies will have a noticeably different feel from the ones in the lower range.
Track 4 – Delivers 900 – 4,000hz (20 minute sweep)
This higher mid-range of frequencies may prompt you to desire more amplitude. It’s okay to turn the amplitude up to a level that’s “comfortably strong”.
Track 5 – Delivers 3300 – 5,000hz (5 minute sweep)
These higher frequencies will feel much more subtle.
MODEL A FREQUENCY SESSIONS
These frequency sessions have been expertly hand tuned from our old style analog Model
B. With supremely refined tuning, we have emphasized traditional target numbers and we’ve employed sweeping techniques which span the entire spectrum of therapeutic frequencies.
JWLABS devices are intended for General Wellness and Entertainment only. No health claims are made or implied.
TROUBLESHOOTING
Problem: Not feeling current/No output.
First, make sure your activity light is illuminated to bright green. If not, be sure that the volume of your media player is at maximum. If it is, check your connection at the electrode jack.
Check that the connections of electrode wires are firmly in place.
If you can’t feel the current on a higher
frequency, try turning up the amplitude.
It’s normal to require more power on the higher frequencies, which are on the higher tracks. Some people will not feel it at this level, others do. Both are normal.
Check the pins on ends of the wires, and make sure they aren’t darkened from use. If they are, you can easily clean them using an emery board or fine sandpaper.
Test your other set of wires. The tiny copper wires inside the cable may be broken. If so, it’s time to order a replacement set.
Another possibility is that there is a break in one or more of the very fine wires that compose the electrode wires. In this case, they will have to be replaced.
Problem: Irritation of skin at site of electrode placement.
With continued use, the adhesive on the patches degrades and may interfere with the quality of your contact.
REPLACE THE PATCHES WITH NEW ONES.
With continued use, the pins on the ends of the electrode wires may become blackened from carbon build-up from the patches. USE A FINE EMERY BOARD OR SANDPAPER TO CLEAN PINS.
Typically, our users are placing electrodes on the palms or the soles of the feet. The skin at these locations is more robust than other delicate areas. Some people are more sensitive than others, so we suggest that you REPOSITION THE PATCHES EVERY TEN MINUTES OR SO. (Pause the recorded sessions and turn the amplitude all the way down before doing this.)
Make sure the pins on the electrode wires are clean.
They may become darkened from multiple uses in the electrode patch. A fine emery board will clean carbon build-up or discoloration. This build-up may interfere with a proper connection.
Do You have more questions?
Email us at info@jwlabs.com
Or give us a call at 888.891.1122 or 708.356.6513
(We’re on Central time.)
SUPPLIES
In the course of using your Wright Laboratories frequency instrument, you will need to re-order supplies from time to time. Please go to https://jwlabs.com for a complete list of supplies.
Wright Laboratories, LLC
Read More About This Manual & Download PDF:
Documents / Resources
 |
jwlabs A4.1 Rife Machine [pdf] Instruction Manual A4.1 Rife Machine, A4.1, Rife Machine, Machine |