jwlabs A4.0 Rife Machine
Specifications
- Model: A
- Manufacturer: JWLABS
- Year of Establishment: 1987
- Usage: Media adapters for converting audio frequencies to electrical impulses
- Intended Purpose: General well-being and entertainment
Warnings
- Consult a physician before using the device.
- Avoid use if you have a pacemaker, defibrillator, or other electronic devices.
- Avoid use on children under 18 without adult supervision.
- Avoid using the device near water.
- Do not plug electrode wires into an electrical outlet.
- Avoid placing electrodes on body parts other than palms of hands and soles of feet to prevent skin irritation or burns.
- Avoid applying electrodes over the heart or above the neck to prevent serious injury.
Cautions
Do not attempt to open the device as it will void the warranty.
Maintenance
For maintenance or battery replacement, contact the factory for assistance.
Welcome to the Model A
Watch the instructional videos provided for guidance on using the JWLABS A3.3 and A4.0 Rife Machines.
Take an Inventory
Ensure all components are included in your package.
Your Model A
Familiarize yourself with the external features of the Model A.
The Basics of JWLABS Rife Therapy
Understand the fundamentals of Rife therapy for optimal usage.
Basic Instructions
Follow the provided instructions for using the JWLABS Rife Machine.
Preparing For Your Session
Get ready for your therapy session by following the outlined steps.
Outline of General Alignment (GA) Session
Learn about the general alignment session process for effective results.
Model A3.3/A4.0 Operating Instruction
Refer to the specific operating instructions for your Model A version.
Getting to Know Your Model A3.3/A4.0
Explore and understand the features of your Model A device for efficient usage.
Model A4.0 Session Titles:
Discover the session titles available for the Model A4.0 machine.
“`
INSTRUCTION MANUALS
Watch our video on How To Use Your JWLABS A3.3 Rife Machine. Watch our video on How To Use Your JWLABS A4.0 Rife Machine.
Disclaimer
JWLABS Machines are media adapters that act as transducers, converting audio frequencies such as the sound of music to electrical impulses which the user feels as gentle vibrations or a tingling sensation. The JWLABS Machines are not designed to nor do we intend that they will exercise any structure-function effect on the user.
These are not FDA certified medical devices and we offer them only for general well being and entertainment purposes.
Customer understands and agrees that in the event of a failure of the device, JWLABS reserves the right to repair or replace the device with another. JWLABS may replace the device with any instrument of their choosing of greater or lesser value than the original, until such time as the defective device can be permanently replaced or repaired. In no case will repaired or replacement devices be shipped to the Customer until any loaned device in the Customer’s possession is returned in good condition. JWLABS reserves the right to assess damage to any device it has made for Customer, to determine if the device has been damaged due to negligence on the part of the Customer. JWLABS assessment of damage will be final, and if the Customer is found negligent, JWLABS reserves the right to collect money for the repair or replacement from the Customer, prior to the replacement or repaired device being shipped to the Customer.
Warranty extends only to the innards of the Model A. It does not include wires or other accessories. It does not include the re-chargeable battery which is located on board. The battery can be replaced for cost at our factory.
PLEASE NOTE: Do NOT attempt to open the top or bottom of the device. Any indication that this has been attempted will void the warranty in its entirety.
Wright Laboratories, LLC 205 E. Butterfield Road, Suite 227, Elmhurst, IL 60126 888.891.1122 · 708.356.6513 · info@jwlabs.com
©2020 Wright Laboratories, LLC
Wright Laboratories, LLC
WELCOME TO THE GLOBAL COMMUNITY OF JWLABS MODEL A USERS!
You have made a sound decision! You have acquired a device that is the instrument of choice for people who understand the value of applying microcurrent to the body. Our instruments transform audio frequencies to electrical output which produces a tingling sensation at the place of contact. This electrical stimulation can be acquired from our specially tuned sessions or from your favorite music. Explore the sensations of our Tactio® feature which makes music a whole body experience! JWLABS Machines are media adapters that act as transducers, which convert audio frequencies, including music, to electrical impulses the user feels as gentle vibrations or a tingling sensation. Our instruments are not FDA certified medical devices. We offer them only for general well being and entertainment purposes. Once you experience our Rife technology you will appreciate why our customers use our machines routinely to improve, preserve and protect their well being. Frequency matters… Change Your Tune!
Watch our video on How To Use Your JWLABS A3.3 Rife Machine. Watch our video on How To Use Your JWLABS A4.0 Rife Machine.
WARNINGS
Check with your physician before beginning use of the device. DO NOT use this device if you have a pacemaker and/or defibrillator or other sensor, monitor or electronic device.
DO NOT use the device on children under 18 years old and do NOT allow children to use the device without adult supervision.
DO NOT use the device near water.
DO NOT plug electrode wires into an electrical outlet.
DO NOT place electrodes in places on the body other than the palms of the hands and/or soles of the feet because it may cause skin irritation, injury or burns.
DO NOT apply electrodes over the heart or above the neck because it could cause serious injury. DO NOT engage in any use of the device which is not expressly stated in our material. If the user engages in using the device for anything other than entertainment, the user accepts full responsibility for the consequences such as serious physical injury.
If the user feels any sensation of pain, burning, skin irritation, or shock stop using the device immediately and turn it off. Seek medical advice if necessary.
6
Wright Laboratories, LLC
CAUTIONS
Read all instructions carefully before beginning use.
Turn the amplitude dial all the way down (counter clockwise) at the end of each music selection, ensuring that you begin each new track with the amplitude minimized. In this position, you can make adjustments to your connections, to your track selection, or turn your device on or off. We recommend limiting the use of the device to an hour. 60 minutes is the recommended maximum duration of a session. Usage beyond 60 minutes a session could result in temporary feelings of fatigue or headache. If headache or fatigue persists for more than two hours, consult with your physician.
Check the device before each use to make sure all components are intact and that no wires are frayed. Do NOT use device if wires are frayed or damaged. Doing so may result in a shock, or no output at all.
When using the machine with two people at a time, be sure the person who feels the current first is in charge of the amplitude setting.
JWLABS devices are Media Adapters intended for General Wellness and Entertainment purposes only. They are not FDA-certified medical devices.
7
Wright Laboratories, LLC
MAINTENANCE
Clean your device with a soft cloth. Do NOT apply cleaning agents to the instrument. Store your device with the case closed to protect the inner components. Check your electrode pins for carbon build up before each use. The carbon build up could interfere with the conductivity and could cause no output or intermittent output, which the user may experience as a shocking sensation. A fine emery board or sandpaper will prevent residue accumulation on the electrode pins. DO NOT let the battery drain below 50% or the device may not work properly.
JWLABS devices are Media Adapters intended for General Wellness and Entertainment purposes only.
These are not FDA certified medical devices.
8
Wright Laboratories, LLC
WELCOME TO THE
MODEL A
9
Wright Laboratories, LLC
TAKE AN INVENTORY
First, take a moment to inventory what you have received. Compare the contents with the packing slip to verify that your shipment is complete. If anything is missing or appears damaged, contact us immediately. Save all packing materials.
YOUR MODEL A Your Model A Start Up Kit Consists of the Following:
1. Two sets of Electrode Wires: (1) 6-ft set and (1) 10-ft set
2. USB Cable and Charging Cube
3. (4) White Adhesive Electrode Patches (“Softies”)
4. Input Cable
5. Quick Start Guide
6. General Alignment CD
(For A3 users only)
5
3 6
4 2
1
10
Wright Laboratories, LLC
OUTSIDE FEATURES
Your Model A is approximately 4″ x 6″ x 2″ and weighs around one pound. The Model A is built into an extremely durable, crush-proof, water-resistant enclosure. Just below the clasp is a little burp valve that automatically releases the air pressure inside so you can close the case. When closed, your Model A is very secure.
GENERAL BACKGROUND
JWLABS has been producing products since 1987 which are based on the long history of Rife technology. Originally built by hand in our workshop, our devices have long been assembled in state-of-theart factories in the US. We have stayed true to our commitment to the original analog signal (Audiophiles appreciate the significance of this, in that the output is more natural, full bodied than those created digitally. This means that with each frequency we deliver, the harmonics around that number are produced.) Our instruments are designed to provide the ability to play frequencies from an outside source, including music. This feature delivers a thrilling experience of tactile music, and provides entertainment value which is unique to our devices. We call this feature Tactio. You may also play specifically tuned frequencies from an outside source through your Model A.
11
Wright Laboratories, LLC
The Basics of JWLABS Rife Technology
Our basic strategy has always been to provide expert frequency tuning throughout the lower end of the audio range. Though many have referenced targeted frequencies for specific health conditions, we do not make or imply such claims. Each of JWLABS frequency sessions provides concentration on certain key numbers, accompanied by sophisticated tuning techniques such as sweeping (both upward and downward) and dithering. These techniques, coupled with the original analog source of our sessions, provide a carefully composed and expertly tuned experience of electro-stimulation.
Our devices are intended to appeal to people who are not interested in learning the intricate details of Rife technology, but prefer a research based user-friendly format which is designed to enhance their General Wellness.
Our recorded sessions are a form of music. They are hand-tuned and played with skill, much like any musical instrument is played while music is recorded. The needs and preferences of the user are anticipated in the contents of each recording, or score. Satisfaction of your experience can be realized with little or no education required.
We’ve prepared numerous sessions for you to explore, and you may also relish the Tactio® experience which involves playing your favorite music through your machine rather than utilizing our specialized sessions. This allows you to feel the frequencies of your music — a unique and multidimensional experience. You are in for a treat!
All of our sessions are created on JWLABS Model B27, our analog instrument, and are recorded by channels A, B, C and D. The energy our machines use is a volts/amps electrical current, balanced in a way that feels good to the user. With our specialized tuning, you will have the confidence and freedom to explore numerous variations in your sessions, including emphasis on certain frequencies (and ranges of frequencies). 12
Wright Laboratories, LLC
Some people prefer to feel the energy on their palms, others choose to apply the electrodes to the soles of their feet. Each approach will produce a variation in sensation.
With the exception of the General Alignment recording, the frequency range for each channel used from the Model B always corresponds to the four tracks of each session title as follows:
· A = Track 1, delivering 3 to 33 Hz
JWLABS Model B
· B = Track 2, delivering 33 to 333 Hz
· C = Track 3, delivering 333 to 3333 Hz
· D = Track 4, delivering 3300 to 10k Hz
Each title is masterfully tuned throughout these ranges with specific sets of exact traditional frequencies, which have been known to be helpful for
thousands of users. Our tuning is both general and specific in emphasis, ensuring that you have a comprehensive session.
Basic Instructions
We recommend that you begin your exploration conservatively, say with a ten – fifteen minute session. (This is true even for folks who have used other Rife machines.) Allow your body to get used to the experience before gradually building up your time to about an hour.
Our General Alignment Rife session is where everyone begins.
It’s ideal for beginners AND for folks re-starting on their machine after a lengthy furlough. This session is also excellent for routine maintenance. The healthy person will be able to move consistently through the tracks of the General Alignment (GA) session smoothly.
13
Wright Laboratories, LLC
Our Rife sessions are divided into tracks. The lower tracks deliver the lower frequencies, moving higher as we go up in tracks, the highest being the last track of a given session. You will note a different sensation on each track at the place of contact (usually palms and/or soles of feet).
Most users will begin with Track 2 for not more than 10 minutes per day, five days in a row, taking two days off each week. (In certain circumstances, the user will begin with Track 5 (please call us for more information). This is a five minute track.
Start each track before increasing Amplitude. This will avoid any sensation of a sudden burst of output.
Begin as follows w Track 2 (10 minute track)
w After completing this Rife session for 3-5 days, introduce ten minutes of Track 3 — After a couple days here, bring in ALL of track 3.
w After 3-5 days of tracks 2 and 3, add Track 4 for ten minutes. When you have completed 3 to 5 days of this, bring in ALL of Track 4 and Track 5.
w When you have completed 2-5, you may circle back to Track 1 — We’re sometimes as low as 3hz on the beginning of any Track 1.
w You will now use the entire session, tracks 1 through 5. Tracks 1 through 5 comprise the entire General Alignment session, totaling about 73 minutes.
w You will note that the frequencies on the lower tracks are quite slow. They have a more pronounced “beat” and you will prefer to have the amplitude lower than on the other tracks. This is perfectly normal. The final track of any recording, on the other hand, is composed of much higher frequencies which require more power. You will notice a desire to intensify the amplitude accordingly.
14
Wright Laboratories, LLC
w Set the amplitude to your comfort level. Feel free to adjust it at any time, given the range of frequencies you are using. You may wish to make adjustments to the amplitude, especially when you are using Music as the source of your frequencies. Each instrument has a different “voice” and each type of music has a different rhythm. The nature of your music selection may prompt you to adjust the amplitude higher or lower as you progress through each musical selection. This is normal.
Preparing for Your Session
CAUTION: Make sure your Model A is powered off and the amplitude is in the power down position before beginning these steps.
BEGINNERS will use only the General Alignment (GA) session.
1. Ensure that the polarity switch is in the positive position. (This indicates that your red tipped electrode wire is positive.)
2. Separate the red and white ends of your electrode wires to about 12 inches. Insert the pins on the ends of the wires into the port on the electrode patches. Place the electrode patch with the red lead wire (indicating positive) onto your right palm and the electrode patch with the white lead wire (indicating negative) onto your left palm.
3. Power on your Model A unit. Press the home screen to bring up the main menu. Select GA Tracks (General Alignment, located in the lower right corner), then select TRACK 2.
4. With the amplitude turned down and the electrode patches in place on your palms, press PLAY to begin your session. (We recommend beginning with TRACK 2 because TRACK 1 is more intense.)
5. Turn the AMPLITUDE clockwise to a level that is COMFORTABLY STRONG, but not more than four to five turns. This guidance 15
Wright Laboratories, LLC
generally applies to the lower tracks of any of the recordings. It’s normal to tolerate more amplitude on the higher tracks. Turn the AMPLITUDE all the way down if you pause during a session as well as between the tracks of your session.
6. At the end of your session, turn the AMPLITUDE all the way down (counter clockwise). Turn the machine off.
7. Remove electrode patches from your palms and place them back onto the plastic shield provided. This will protect the patches and help them last longer. Remove all replaceable wires from your unit and close the case.
8. If you would like to use the Tactio® feature, insert one end of the Input Cable into the jack marked “Input” and the other end of the Input cable into the headphone jack of your media source.
Outline of General Alignment (GA) Session
Track 1 – Delivers 2 – 33hz (23 minute sweep) These frequencies are very slow. Some are slower than our brain waves in the waking state. For this reason, people sometimes feel calmed when using this track. We recommend that users add this track to their routine only after they have progressed through tracks 2-5.
Track 2 – Delivers 33 – 404hz (10 minute sweep) These frequencies remain in the lower end of the range which we address. This is where beginners initiate their exploration.
Track 3 – Delivers 383hz – 700hz (17 minute sweep) These mid-range frequencies will have a noticeably different feel from the ones in the lower range.
16
Wright Laboratories, LLC
Track 4 – Delivers 900 – 4,000hz (20 minute sweep) This higher mid-range of frequencies may prompt you to desire more amplitude. It’s okay to turn the amplitude up to a level that’s “comfortably strong”. Track 5 – Delivers 3300 – 5,000hz (5 minute sweep) These higher frequencies will feel much more subtle.
WHAT IS TACTIO®?
John Wright conceived Tactio® very early in his career of developing Rife machines. He understood that the safest range of frequencies is in the audio range, and he designed his early instruments with an audio jack, making it possible to record the hand tuned frequency sessions in real time. He knew that the potential for tactile music was promising.
Do you love music? This will take your enjoyment to a whole new level. The thrill of listening to your favorite music and feeling the electron flow that these selections produce is second to none. Our devices have gone through many renditions, and we’re proud to offer this safe and exhilarating experience to our customers.
What you will need: · Input cable (provided in your startup kit.) · Headset (wired) with a volume control · Music source with a headphone jack (CD player, computer, tablet,
iPhone or smartphone) · Model A4
Simply plug your input cable into the device you’re using to play your music. Attach your headset to the Tactio® jack and set up your electrodes for a regular Rife session. Be prepared to adjust the amplitude as the
17
Wright Laboratories, LLC
music intensifies or becomes more subdued. The display on your Model A4 will say “Tactio® mode” when you are streaming music or any other audio signal through your machine. Tactio® will bring you hours of entertainment and will provide an entirely new way for you to introduce your friends and family to Rife technology.
It’s fun, it’s energizing. Put a new level of vibrancy in your life!
TROUBLESHOOTING
Make sure the pins on the electrode wires are clean. They may become darkened from multiple uses in the electrode patch. A fine emery board will clean carbon build-up or discoloration. This build-up may interfere with a proper connection.
Problem: Irritation of skin at site of electrode placement.
With continued use, the adhesive on the patches degrades and may interfere with the quality of your contact. REPLACE THE PATCHES WITH NEW ONES.
With continued use, the pins on the ends of the electrode wires may become blackened from carbon build-up from the patches. USE A FINE EMERY BOARD OR SANDPAPER TO CLEAN PINS.
Typically, our users are placing electrodes on the palms or the soles of the feet. The skin at these locations is more robust than other delicate areas. Some people are more sensitive than others, so we suggest that you REPOSITION THE PATCHES EVERY TEN MINUTES OR SO. (Pause the recorded sessions and turn the amplitude all the way down before doing this.)
18
Wright Laboratories, LLC
TROUBLESHOOTING
Problem: No green activity light
In the A4, a failed activity light indicates that the upper section of the device is not communicating with the lower section. It’s likely that the ribbon cable has become detached, and the machine will have to be repaired at the factory.
For the A3, be sure that the volume of your media player is at maximum. Computers, phones and other media devices have several places for volume adjustment.
Problem: Not feeling current/No output.
First, make sure your activity light is illuminated to bright green. If not, be sure that the volume of your media player is at maximum. If it is, check your connection at the electrode jack. Check that the connections of electrode wires are firmly in place.
If you can’t feel the current on a higher frequency, try turning up the amplitude. It’s normal to require more power on the higher frequencies, which are on the higher tracks. Some people will not feel it at this level, others do. Both are normal.
Check the pins on ends of the wires, and make sure they aren’t darkened from use. If they are, you can easily clean them using an emery board or fine sandpaper.
Test your other set of wires. The tiny copper wires inside the cable may be broken. If so, it’s time to order a replacement set.
Another possibility is that there is a break in one or more of the very fine wires that compose the electrode wires. In this case, they will have to be replaced.
SUPPLIES
In the course of using your Wright Laboratories frequency instrument, you will need to re-order supplies from time to time. Please go to https:// jwlabs.com for a complete list of supplies.
19
Wright Laboratories, LLC
NOTES
20
WOprigehrat tLinagboInrsattruocrietios,nLsLC
MODEL A3.3 MODEL A4.0
OPERATING INSTRUCTIONS
Watch our video on How To Use Your JWLABS A3.3 Rife Machine. 21
MWoridghetlsLAa3b.o3/raAt4o.0rie(sB,aLsLeC)
GETTING TO KNOW YOUR MODEL A3.3 AND A4.0
(This information is for both the Model A3.3 and Model A4.0)
Power Switch This dome switch (the raised button located in the upper left corner) is illustrated with the universal symbol for power. A red LED illuminates the center of the button. When the power is first turned on, the green ACTIVITY light will illuminate briefly. It will remain darkened until your frequencies are playing.
Charging the Battery Make sure the power switch is turned OFF while charging the battery. You may charge the battery via the USB cable with the adapter provided or plugged into your computer. Please Note: charging will be completed much faster when using the power supply in the wall. A yellow LED will indicate that the battery is charging. When charging is complete, the LED will go dark. Expect approximately five hours of use before needing a new charge. 22
WOprigehrat tLinagboInrsattruocrietios,nLsLC
Do NOT fully discharge the battery. For A4.0 users, we recommend re-charging when the battery icon indicates that 50% of power or less remains. Our engineers advise that the battery likes to be topped off.
Input
Input Jack
This port allows you to provide the frequency input from an outside source. You will use this to connect one end of your input cable. The other end goes to the headphone jack on your cd player, computer, tablet, or smartphone. This is how the Music gets to your machine, providing the tactile experience. When using this feature on the Model A4.0, the screen will indicate “Tactio® mode”.
Tactio®
Headphone (TACTIO®) Jack
This port allows you to listen to the music you have selected. Be sure to use headphones or earphones with a volume control, as your music player must have the volume at maximum. Listen to your favorite tunes while connected for your Rife session and you will have a tactile sensation of your music!
Electrode 1 Electrode 2
Electrode Ports
Insert an electrode wire into an ELECTRODE JACK. (Beginners use only one electrode wire.) Be sure to insert the wire in a straight downward motion.
23
MWoridghetlsLAa3b.o3/raAt4o.0rie(sB,aLsLeC)
(Do not apply torque to the connection when placing or removing electrode wire from the port. This may damage the port of your Model A.)
Activity Light
ACTIVITY
This light (set in between the Electrode ports), indicates that there is output and the electrode wires are active. This means that there is current moving through the wires.
PLEASE NOTE
The ACTIVITY LIGHT will illuminate briefly when the power switch is turned on. It will darken until your selected track is playing.
Polarity Switch
This switch changes the direction of the electron flow, allowing for a more nuanced tactile experience.
When using the lower tracks, (most notably on track 1), the ACTIVITY LIGHT blinks or pulses. This indicates the slower pulses of the frequencies on the lower tracks. As the frequencies become higher, the green light will become solid.
Amplitude Dial
The AMPLITUDE DIAL is a ten-turn potentiometer dial that controls the amount of output, meaning the intensity of the signal. For A4.0 users, output is measured in volts as indicated on the meter. One full revolution equals 10 percent of the power.
24
WInsrtigruhcttLioanbsoratories, LLC
MODEL A4.0
(TOUCHSCREEN)
OPERATING INSTRUCTIONS
Watch our video on How To Use Your JWLABS A4.0 Rife Machine. 25
MoWdreigl hAt4L.a0 b(Toorauctohrsiecsr,eLeLnC)
MODEL A4.0 IS THE FIRST TOUCHSCREEN RIFE MACHINE!
CAUTION
Model A4.0 Users: Do NOT apply tension to the ribbon cable connecting the upper touch screen compartment with the lower section. This will interfere with the communication between the upper and lower sections. (It can be repaired, but will not be covered under warranty.)
GETTING TO KNOW YOUR MODEL A4.0 TOUCHSCREEN
(For instructions on the base, please see pages 20-22)
Display Screen JWLABS’ touch screen will appear when the Model A4.0 is turned on. You must press the screen (not just touch) to access the menu. 26
WInsrtigruhcttLioanbsoratories, LLC
Welcome Screen
1. The Battery Icon, which appears in upper right-hand corner of the touch screen, indicates the amount of charge available.
2. Menu Selections: Favorites / A – E / F – M / N – 2 / All / GA Tracks
FAVORITES N – Z
WELCOME
A – E
F – M
ALL
G.A. TRACKS
Selecting Your Title Individual Menu Screen Use the Page Indicator and Directional Arrows to locate your session.
1-10
A-E
1-10
A01_DOM
A02_SCE
A03_CID
A04_NEQ
A05_TIN
A06_ENO
Session Screen Press the Green Arrow to Play A Yellow Pause button will appear while in use.
Press the Red Square to Stop
0 V
A04_NEQ
0:00
12
4:13
3
4
The Scroll Bar indicates elapsed time.
0:00
4:13
The Voltage Indicator located to the left of the Battery Icon on the display screen indicates the output being used (measured in Volts). The maximum is 80 Volts. You will rarely, if ever, use full power and only on the highest tracks. It’s also normal to need extra power if the electrode patches are placed on the soles of your feet.
27
MoWdreigl hAt4L.a0 b(Toorauctohrsiecsr,eLeLnC)
General Alignment Session
This is the only session that contains five tracks. All users will begin with Track 2.
1:13
25 V
GA
4:13
You can FAVORITE sessions by pressing the star when your title is selected 1 2 3 4 5 (the star will become yellow when
session title is selected). This feature allows you to access your commonly used frequency sessions from the Favorites menu on the welcome screen without going through the entire menu.
MODEL A4.0 SESSION TITLES
These frequency sessions have been expertly hand tuned from our old style analog Model B. With supremely refined tuning, we have emphasized traditional target numbers and we’ve employed sweeping techniques which span the entire spectrum of therapeutic frequencies.
JWLABS devices are intended for General Wellness and Entertainment only. No health claims are made or implied.
A
A01_DOM A02_SCE A03_CID A04_NEQ A05_TIN A06_ENO A07_HES A08_DSQ A09_COH A10_ZHE A11_IGN A12_LER A13_OPE A14_ENO
28
A15_EMI A16_EUR A17_ORE A18_THR A19_TIS A20_USQ A21_XIE A22_PEN A23_PET A24_CQQ A25_TER A26_TRI A27_THR A28_THM A29_TRO
A30_AXI A31_HLE A32_TOI
B
B01_OLI B02_CKA B03_LLI B04_RDQF B05_LAD B06_IST B07_OODD B08_OOPH B09_OOPL B10_ILS
B11_NESB B12_EAS B13_EAST B14_EATH B15_IGHD B16_ONC B17_UIS B18_BONP B19_NIO B20_RNSG B21_RNSR B22_RSI B23_TTEL
WInsrtigruhcttLioanbsoratories, LLC
C
C01_NCEG C03_NDIA C04_RBU C05_RDI C06_RPA C07_TAR C08_ARR C09_REBP C10_REBF C11_RVIL C12_RVI C13_EMO C14_ICK C15_ILB C16_ILDD C17_LDFC C18_LDHC C19_LDSC C20_LDSH C21_LIC C22_LIT C23_NJU C24_NST C25_NVU C26_RNS C27_STA C28_AMP C29_OHN C30_TSQ C31_STI
D
D01_NDR D02_AFN D03_PRE D04_TOX D05_ABE D06_ARR D07_GES D08_PTH D09_STEO D10_STES D11_ZZI D12_OPS
D13_UGQA D15_SME D16_SPE
E
E01_OLI E02_RSQ E03_ZEM E04_EMA E05_ECTS E06_LARG E09_ILE E10_STBV E12_OPH E13_STAT E14_ESTR E15_ESQ
F
F01_CIAC F02_CIAP F03_INT F04_SCI F05_TIG F06_VER F07_BRO F08_SSU F09_STU F10_ATU F11_UQQ F12_UKE F13_ODQP F14_OTSO F15_OST F16_NGU
G
G01_LLB G02_LLS G03_NGR G04_STR G05_AND G06_ANDF G07_AUC G08_ITE
G09_NAD G10_NOR G11_UTQ G12_AVE G13_MSQ
H
H01_IRQ H02_LLU H03_NGO H04_YQFE H05_ADQP H06_ADA H07_ART H08_MOR H09_MRR H10_PAT H11_RNI H12_RNID H13_RPE H14_CCO H15_PQPA H16_VES H17_ARS H18_TQFL H19_DRO H20_PER H21_PRC H22_PRT H23_POX
I
I01_EOC I02_POT I03_CREH I04_DIG I05_FANP I06_FEC I07_FECD I08_FLA I09_FLZ I10_ JUR I11_SECB I12_SOM I13_TEL
I14_TERN I15_TESI I16_TESS I17_TESG I18_TOX I19_RIT I20_CHI
J
J01_UND J02_INT
K
K01_DNEG K02_EEQP
L
L01_CTA L02_SSI L03_XAT L04_PRO L05_UCO L06_UKE L07_UKO L08_VERG L09_COMA L10_MBA L11_MBAV L12_NGS L13_PUS L14_MEQD L15_MPHS
M
M01_LAR M02_ASL M03_LAN M04_MOR M05_NIED M06_NIN M07_NOR M08_NSE M09_NSTC M10_NTAD M12_TAL
29
MoWdreigl hAt4L.a0 b(Toorauctohrsiecsr,eLeLnC)
M13_GRA M14_NGO M15_TIOS M16_LTIS M17_MPS M18_SCL M19_SCUD M20_COP
N
N01_USE N02_CKQ N03_PHR N04_RVE N05_RVEI N06_URA N07_URS N08_URI N09_URO N10_COT N11_SEQD
O
O02_CIPN O03_CHI O04_TEO O05_TEY O06_ARIG
P
P01_INQG P02_NCR P03_RAS P04_RAT
P05_RKI P06_LVI P07_RIC P08_RID P09_AGO P10_ARY P11_LES P12_NWO P13_ACE P14_ASM P15_EUR P16_EUM P17_ISOG P18_LIO P19_LYP P20_OST P21_ORI P22_OSI P23_ORR
R
R01_BIE R02_EUM R03_EUMA R04_INI R05_CKE R06_NGW
S
S01_RCO S02_ARLF S03_IAT S04_URV S05_MIQP
S06_ING S07_NUS S08_NUT S09_INQ S10_EEPS S11_IPPD S12_ALL S13_ELL S14_ELLM S15_EEZ S16_REQT S17_ASM S18_ERM S19_LEE S20_OND S21_RAI S22_AMM S23_APH S24_ERI S25_OMA S26_ONE S27_REP S28_REX S29_ROK S30_YQQ S31_NST S32_PRA S33_RGE S34_ELL S35_NDR S36_PHI
T
T01_STE T02_TAN
NOTES
T03_ALA T04_ROM T05_ROB T06_RUS T07_YMU T08_YRO T09_SSU T10_NSI T11_OTH T12_XICR T13_ACH T14_AUM T15_BER T16_MOR T17_PHOF
U
U01_CER U03_ETH U04_TIC
V
V01_RUS
W
W01_RTS W02_IPL W03_RMS
Y
Y01_LLOF
30
Documents / Resources
 |
jwlabs A4.0 Rife Machine [pdf] Instruction Manual A3.3, A4.0, A4.0 Rife Machine, Rife Machine |